Sign in to our website and become an InMoov member. It will allow you to post message, pictures, and share with others InMoov builders. It's just one click away!
Username or Email Address
lorn campbell posted a new activity comment 3 years, 2 months ago
lorn campbell posted an update 3 years, 5 months ago
My new Headbot stand perhaps? Great for the table top.
Handy! Not sure if the term is appropriate though…
lorn campbell posted a new activity comment 3 years, 5 months ago
The PLA is from Technologyoutlet.co.uk but I buy it from Amazon as its cheaper there. Always used this brand and its been good. https://www.amazon.co.uk/Premium-quality-filament-suitable-printers/dp/B00I8MRPDM/ref=sr_1_4?ie=UTF8&qid=1509304225&sr=8-4&keywords=pla+filament+1.75mm
The PETG I am going to try is from e3D-online EDGE range
All in PLA, I have never used ABS. Seems to work fine even with gears etc. I am going to try PETG for my InMoov neck parts that keeps breaking [BH mod that Gael has recently updated]
That was my thought – It is too white for PLA… Could you say me from which company you bought your PLA? I am searching for the bright white you are having too!
New right foot!! Brilliant Gael – also are you going to upload the servo linkages?
What type of material are you using for your prints?
lorn campbell posted a new activity comment 3 years, 7 months ago
Hi Timothy, if you are in the UK I can post you some? regards, Lorn
lorn campbell posted a new activity comment 3 years, 9 months ago
Perry, that is just what I need. That back looks like a single piece, but is several parts! Your InMoov is really fantastically finished. I need switch fillers if you are 3D designing any for the back?
Hi lorn. I hear ya. I need to fill those in. I’ll get to those soon. I am thinking it should be pretty easy. On a work trip so another week and I will be home. I have my second EZRobot controller waiting for me too so I’m excited to get back to it.
Wow, the cables fit through the gap. What happens when you rotate the arm? The arm cables have always been an issue on my InMoov, have run the forearm & hand in sleeving externally, but the shoulder cabling is still a mess.
Great pictures, looking really good Ray
The cable relative to the shoulder moves in the gap, the cables relative to the bicep are stationary. The elbow piston clears the ribbon cable by a 2 mm inside the gear, gets a bit closer outside the gear on the bicep end but still clears it just.
lorn campbell posted a new activity comment 3 years, 10 months ago
I was thinking about your ideas on a robot meet. One idea might be to have meet-up using video conferencing. I use “zoom meeting” at work regularly and its free. We could set up a time/date that suits people is the US also maybe. Its really simple and you can use your mobile phone/laptop/pc etc to participate. We could keep it…[Read more]
Hi Lorn, that’s a brilliant idea. I’ve not seen Zoom before. It look a bit like face time.
I’ll join up and perhaps we can do a test run together.
Hi Steve, thanks
Been building my InMoov since about last August when I bought my Wanhoa printer. Started using EZB about January time. I can send you my files if you want as I found that looking at existing setups answered so many questions. Also chat to Bob Houston on the forums as hes made his files available. They really give an insite to…[Read more]
lorn campbell posted an update 3 years, 10 months ago
I am programming my InMoov using EZ robot software. I have taken his forearms off as I am updating his servos for his hands, so only part of him works at the moment. His head, neck and torso is working in this video. I have added an adapted “Bob Houston” neck on him by Gestalt73. Fitted a speaker in his mouth, but need to work on the…[Read more]
Lorn, that’s brilliant. How long have you been working on your Inmoov? I’m using EZ to co troll mine but I’m not as far ahead as you. Where are you in the UK?
lorn campbell posted a new activity comment 3 years, 11 months ago
That looks great
lorn campbell posted a new activity comment 3 years, 12 months ago
3 servos for the shoulder – arm swing front to back, away from body and arm rotate. Plus the bicep makes 4. Its clearer when you have printed all the parts out, the pictures of the shoulder build start to make more sense. Your robots looking really good. Lorn
I’ve come a long way since this photo. InMoov is ever changing…lol
lorn campbell posted a new activity comment 4 years ago
Hi Wayne – very good point about it being upside down! I am not sure if it will fit in the head that way around but at least I could hold it in the vice whilst taking the video. Been waiting on the camera parts to arrive before I finish the head – camera finally arrived yesterday.
lorn campbell posted an update 4 years ago
Mm InMoov face and eyes being tested. Just using a small servo tester so its not calibrated properly yet.
Looks great, but you had me worried for a moment when I compared to mine! Is there a reason you’ve mounted the eye mechanism upside down vs. Gael design? Does it give you some benefit? I don’t have a completed skull yet, to see how the clearances and space work out with your orientation. 🙂
My Inmoov eyes mechanism being tested
lorn campbell posted an update 4 years, 1 month ago
Finally started to paint my InMoov so dismantled him and am rebuilding and spray painting away. I also got the base stand sorted out and am now printing the final bits of the stomach parts. That left hand is still in a plastic bag so must build that finally!
Just a note about picture uploads on this site – using an iPhone to take pics in…[Read more]
lorn campbell posted a new activity comment 4 years, 1 month ago
Ask any questions you want, InMoov is such an unusual project, you just get hooked by it. I stumbled across it because I am learning software programming and wanted to also try a bit of 3D printing. I think the first I saw of it was some high school kid on the internet using a wooden version of an InMoov hand for his exams. He was…[Read more]
Thanks so much for your message. Your story is fascinating. I do have a few more questions, if you don’t mind.
Where do you live?
What do you do for a living?
What do you do for fun / leisure?
How did you find out about InMoov and what attracted you to it?
Do you have your own 3D printer?
What do you hope to achieve in the end? Any…[Read more]
lorn campbell posted an update 4 years, 2 months ago
Here are the lower stomach parts
Looking really good.
Here are latest pictures of my robot build
lorn campbell posted an update 4 years, 5 months ago
Hi everybody, finally got around to uploading some pictures of my inmoov. My printerstopped working recently but all working again now and printing the left arm!!
lorn campbell posted a new activity comment 4 years, 7 months ago
Hi Gael, great to talk to you. I am still printing the hand and forearm and will look at the software again later. All going well!
Quick question – where is a cheap place to buy the extension springs for the hand tensioner? Can only find 20mm long not 10mm long. Also is that the spring length only or total length? all the best, Lorn…[Read more]
I actually bought my set on ebay:
lorn campbell posted an update 4 years, 8 months ago
I have bought Wanhao i3 V2 printer and have started to print the hand and wrist parts. Using PLA to print with. I will add pictures soon. Built the starter finger and got that to work with myrobotlab software but no luck with voice control yet, although it chats away and hears me OK.!
Let us know how that goes, and feel free to explain your issue with the sound commands of MyRobotLab.