Sign in to our website and become an InMoov member. It will allow you to post message, pictures, and share with others InMoov builders. It's just one click away!
Username or Email Address
amby posted a new activity comment 3 years, 7 months ago
hello ho thank you i just see your message thank
amby posted a new activity comment 3 years, 8 months ago
hello valentin did you put stl files on thingiverse about your eyelid? thank you
because il looking for
Hi Valentin – yes please post how you did this, looks very clean. would like to build myself.
thank you for interest. I published all progect in thigivers:
amby posted a new activity comment 4 years, 8 months ago
nice work i do the same neck which servo did you use? i use mr996 is not enought strong
My neck moves fine with the three servos working together.
amby posted an update 5 years, 3 months ago
you can see my prototype legs with drill motor work nice thank you my friends
Keep it up
hello everybody i can show you my work actually you can see my prototype leg with drill motor the manuel tests work nice
amby posted a new activity comment 5 years, 9 months ago
your print is perfect wouaaa
so nice your inmoov
tres bonne idee merci d avoir partagé
hello ross hey nice job you do my idea but me i use drill motor
you cas see here my work
amby posted a new activity comment 5 years, 11 months ago
hoo noooo i am so sad for you quick quick give up
hello jaideep your inmoov is look so nice like a metal very nice
very nice work the eyes move nice
how you do for pilotes servos like this?
Hi!! I have the electronic to use myrobotlab but for this demo and other test i use first a plane tx and rx with 6v battery
very nice work the eyes move nice
amby posted a new activity comment 6 years, 6 months ago
i can t think it is possible and so so dangerous
wouaaa it is hotttt lol
Oh yeah and it smells really bad in my workshop…
amby posted an update 6 years, 7 months ago
i find this articulation interesting
no idea, what is this good for?
@Juerg, I’m guessing Amby sees it for the torso and stomach displacements.
The two armonics drive must be for the shoulders. Though when you know how much an armonic drive cost, you back off a little. 🙂
@Amby, yes, it is on that U-joint principle that I had designed the stomach rotations.
amby posted a new activity comment 6 years, 7 months ago
very good idea use this articulation bob
i think to use the same idea for ankle was the best
Thanks Bob for the name “U-joint”, I couldn’t grab it on internet.
You are totally correct concerning good stomach movements for to be able to have human gait ressemblance.
The parts for this modification are on Thingiverse.
nice work what is this servo motor?
amby posted a new activity comment 6 years, 8 months ago
hello gael thank you yes the wheels plateform is enough for balance
all is ok with my prototype cardboard so now i start to build in wood
amby posted an update 6 years, 8 months ago
my robot with plateform
Very good progress Amby with your robot! Is the wheel platform large enough to keep the robot in balance when you drive it around?
hello juerg interestinf wrist
thank you for show us
amby posted a new activity comment 6 years, 9 months ago
@ bob hello i use a toy moto like this
i find 2 in trash so i take motor for free
battery change easy when the battery is empty
@ gael hello gael is very fast this motor for robot but i can drive slowly
yes this plateform is…[Read more]
amby posted an update 6 years, 9 months ago
hello you can see my video about my easy plateform here
you can see battery removable easy when it is discharge change by a new
Nice idea with the rechargeable batteries. What kind of motors are you using?
Very nice Amby!
It seems to have good speed with those electric car motors.
I really like your battery idea,! If I wouldn’t fly the globe with my InMoov robot, I would go for your solution!
Unfortunately we may not carry batteries like that in planes. The very common 6VAh batteries can be bought almost in every country, so when I arrive in a…[Read more]
Fantastic Amby, Whaoo two motors and two batteries !, you are ready for the InMoov Racing 🙂
hello gael yes of course a can give everybody plans for built it this plateform very cheap but in first i builf in cardboard for prototype and when all is ok i give plans and informations
i design a connectors for wheels and motor
so i use a motorcycle for children find in trash a small bicycle children find in trash and i use a batterie for drill…[Read more]
I love to see videos!!
i like your choice color in your inmoov!!!
Thank You 🙂
hello everybody i build a plateform for inmoov it is a very easy plateform very cheaper
it is my first prototype in card board so if some people are interested i can send you plans
Nice work! It is amazing what you do with cardboard ! Can you share some information about the motors you used?
Amby the King of Cardboard!
As I commented on your post on MyRobotLab, you could make Thingy on Thingiverse with the DXF and all informations of the motors, wheels and sources. Some builders could reproduce it in PVC or plexiglas.
amby posted a new activity comment 6 years, 10 months ago
where can i find stl kinect xbox please?
nice print nice choice color good look
thank you gael
it is possible you put it on thingiverse please
thank you for your help
hello marcos your piece is not again down load
amby posted a new activity comment 6 years, 11 months ago
yes you are true gael it is for knee
yes i am always the king of cardboard lol i do all my tests with cardboard and when it is good i do on abs
i use a drill motor for castorama 11 euros motor batterie charger ans very strong
amby posted an update 7 years ago
i do a short video first test how work my leg but is not finich again it is a prototype again
I see that you are becoming a 3d printer master after being the king of cartboard.
I’m guessing what we see is for the knee rotation, correct?
Did you finally use the motors of the drills you bought or is it with a servo.
amby posted a new activity comment 7 years ago
thank you gael i working to find a nice solution for my ankle and i do a video after for show everybody and in opensource 🙂
hello the world it is so long time i dont give some new it is because il work to build my legs about the robot
Ehi nice project Amby! some videos in action!! And specification details!
Controlled by MyRobotLab?
Other builders will love that.
amby posted an update 7 years, 3 months ago
very nice your legs
it is possible to see a video work
amby posted a new activity comment 7 years, 4 months ago
thank you for answer me
i find your print so nice
have you do a tutorial for explaine how you do
i am very surprising
your hand is like actetone how you do?
thank you amby
like i said i printed in 100% PLA and then i polish the printed part. I will make a Tutorial how to print and polish PLA and how to use “superglue” and “primmer-spray”.
hello do you use acetone?and what is the material grey in end fingers? thank you amby
no i printed in 100% PLA so Acetone not helps me. I use “superglue” or “one-second glue” to fix the parts. But for the Hands i don´t need it because the finger part give in one part:
And the end of the Finger are Gaels Finger tips / tops in Silicon
I hope i could help you!!!
Boris / RentaPrina
amby posted a new activity comment 7 years, 6 months ago
hello alex nice your legs? have you do a blog with your pictures or video thank you amby
amby posted a new activity comment 7 years, 8 months ago
thank you for your answer amby
hello Merne i like you small inmoov so cute but what is this eyes? so nice
Hi Amby, thanks. The eyes I got from a site years ago, they are animatronic eyes. Here is one site, but if you google search you could find them cheaper.
amby posted a new activity comment 7 years, 9 months ago
salut gael oui on m a fait cadeau de ta casquette je pensais ne pas l avoir et je l ai eu super content en plus elle est tip top comme j aime
Topissime la casquette
amby posted an update 7 years, 9 months ago
my birthday so happy
Hey cool, you got a InMoov cap!!