InMoov | Jérome | Activités des amis https://inmoov.fr/members/jeromelr/activity/friends/ Activités des contacts de Jérome Sat, 04 Apr 2026 01:03:14 +0200 https://buddypress.org/?v=10.6.0 fr-FR 30 hourly 2 f9245ed109f06761584a92a20912c576 Chuah Wei Jie a publié une note: https://inmoov.fr/activity/p/29561/ Wed, 25 Sep 2019 03:35:02 +0200

]]> 0 c885078d4cf3ec405d28fe119bd34b5f Chuah Wei Jie a commenté une activité https://inmoov.fr/activity/p/29548/#acomment-29557 Tue, 24 Sep 2019 11:27:25 +0200 Yes. It\’s a COM3 (I had checked in Device Manager). I currently test on the Neck part, which are pin 12 and 13 only, but the servo doesn\’t response. I shows that the connection succeed for the Arduino by the way. I wonder, just maybe, is it the problem of the connection/wiring/soldering?

En réponse à - Chuah Wei Jie a publié une note I tried to connect the external power source like this, but it seems like the nervo board does not recieve any power… ]]> 25150d9999c96c675d4d68fffbdc6385 Chuah Wei Jie a commenté une activité https://inmoov.fr/activity/p/29548/#acomment-29555 Tue, 24 Sep 2019 10:46:05 +0200 Yup, definitely.

En réponse à - Chuah Wei Jie a publié une note I tried to connect the external power source like this, but it seems like the nervo board does not recieve any power… ]]> ed1052ec47f6cb59fb6970c8c88a5c99 Chuah Wei Jie a commenté une activité https://inmoov.fr/activity/p/29548/#acomment-29552 Tue, 24 Sep 2019 10:14:41 +0200 The servo didn\’t response when I try to move it using SERVO_CALIBRATION.bat

En réponse à - Chuah Wei Jie a publié une note I tried to connect the external power source like this, but it seems like the nervo board does not recieve any power… ]]> 8f9bab6c70a8b6edbb14c1eb8e524737 Chuah Wei Jie a publié une note: I tried to connect the external power source like this, but […] https://inmoov.fr/activity/p/29548/ Tue, 24 Sep 2019 08:47:11 +0200 I tried to connect the external power source like this, but it seems like the nervo board does not recieve any power…
]]> 8 0c9f7d6c190e755a1628ce7650b0fb00 Chuah Wei Jie a commenté une activité https://inmoov.fr/activity/p/29459/#acomment-29492 Tue, 17 Sep 2019 00:23:49 +0200 The notification : Could not create service Python python pop-up everytime I open myrobotlab.jar. The thing is, there ain’t any problems in launching START_INMOOV.bat. To make sure did the python works, I just simply run a simple line print(« Hello”), it does printed in START_INMOOV.bat or SERVOCALIBRATION.bat but not in the myrobotlab.jar. I…En afficher davantage

En réponse à - Chuah Wei Jie a publié une note Anyone have any idea why this happened? ]]> 5f562cbe315aaee2f968d49d84fb0e57 Chuah Wei Jie a commenté une activité https://inmoov.fr/activity/p/29459/#acomment-29485 Mon, 16 Sep 2019 14:05:07 +0200 I\’m using myrobotlab.1.0.2693.7. It actually happened in a sudden, previously there was no such issue. Basically, I can\’t access to any services through myrobotlab.jar (Even communicating with Arduino or access Python), the thing is, these function looks fine if I open it via SERVOCALIBRATION.bat. I don\’t know is this a bug or?

En réponse à - Chuah Wei Jie a publié une note Anyone have any idea why this happened? ]]> bf930fb0f2c5ed661bbc79b1fdd9cc03 Chuah Wei Jie a publié une note: Anyone have any idea why this happened? https://inmoov.fr/activity/p/29459/ Sat, 14 Sep 2019 08:20:28 +0200 Anyone have any idea why this happened?
]]> 6 052f768ea5cf5c66a75c609da880ed37 Chuah Wei Jie a commenté une activité https://inmoov.fr/activity/p/29346/#acomment-29422 Wed, 11 Sep 2019 15:05:21 +0200 Noted with thanks Gael. By the way, in the skeleton_head.config, do we need to change these line of code :
MouthControlJawTweak=False

En réponse à - Chuah Wei Jie a publié une note I’m in doubt in the soldering of nervo boad. Can anyone show the parts that need to be soldered if : 1. I’m using the same voltage to all sevo. 2. I’m using the PIR sensor for […] ]]> cb49d8c785b4e8397520d1e32ab58f7b Chuah Wei Jie a commenté une activité https://inmoov.fr/activity/p/29346/#acomment-29416 Wed, 11 Sep 2019 10:20:52 +0200 Hi Gael. I\’m trying to connect the Arduino to Inmoov now, but the jaw doesn\’t seems to sync with the speech when Inmoov is talking. It can only sync a few sentences initially, but after that it doesn\’t seems to have any movement anymore, I wonder why this happen? I had configure and set all the limits for the servo thou.

En réponse à - Chuah Wei Jie a publié une note I’m in doubt in the soldering of nervo boad. Can anyone show the parts that need to be soldered if : 1. I’m using the same voltage to all sevo. 2. I’m using the PIR sensor for […] ]]> fe0eb53fd1861da20e6e997aa828f3e6 Chuah Wei Jie a commenté une activité https://inmoov.fr/activity/p/29346/#acomment-29380 Tue, 10 Sep 2019 04:35:33 +0200 Thanks for the reply Gael. I would like to test the tracking function in mrl by using the eyes only, what should I do?

En réponse à - Chuah Wei Jie a publié une note I’m in doubt in the soldering of nervo boad. Can anyone show the parts that need to be soldered if : 1. I’m using the same voltage to all sevo. 2. I’m using the PIR sensor for […] ]]> f2980be36888620223ff18d81e9caf12 Chuah Wei Jie a publié une note: I'm in doubt in the soldering of nervo boad. Can anyone […] https://inmoov.fr/activity/p/29346/ Sun, 08 Sep 2019 05:32:49 +0200 I\’m in doubt in the soldering of nervo boad. Can anyone show the parts that need to be soldered if :

1. I\’m using the same voltage to all sevo.
2. I\’m using the PIR sensor for 5V.

]]> 6 7444e077bed597a347d78d897b19ced0 Chuah Wei Jie a commenté une activité https://inmoov.fr/activity/p/29102/#acomment-29152 Tue, 20 Aug 2019 12:04:57 +0200 I wonder do I need to solder the third red dot (As stated in Step 2, the one at the bottom-left in the picture) if same voltage applied?

En réponse à - Chuah Wei Jie a publié une note Anyone have any idea how the power supply is connected to the Nervo Board? I’m lost. ]]> 7961aaa0404e3de7c26a6a94a8fa8589 Chuah Wei Jie a commenté une activité https://inmoov.fr/activity/p/29102/#acomment-29130 Sun, 18 Aug 2019 10:11:58 +0200 Dear Gael, in the tutorial it stated that \ »Soldering the little back connector option 3.3V or 5V to power last analog pins.\ » in Step 3. If I\’m using the same voltage for all servo, do I need to solder this? (I\’m not using the 3rd nervo board for the finger sensor as I didn\’t build that part)

En réponse à - Chuah Wei Jie a publié une note Anyone have any idea how the power supply is connected to the Nervo Board? I’m lost. ]]> 7cbfae54aa2210de968ef2c0948e8df4 Chuah Wei Jie a commenté une activité https://inmoov.fr/activity/p/29102/#acomment-29119 Sat, 17 Aug 2019 10:01:08 +0200 Is the XT60 connector attached to the Nervo Board by soldering at the port of 5/6V?

En réponse à - Chuah Wei Jie a publié une note Anyone have any idea how the power supply is connected to the Nervo Board? I’m lost. ]]> 5e0bc5cbe40cd32d8be6d0fb9f49276b Chuah Wei Jie a publié une note: Anyone have any idea how the power supply is connected to […] https://inmoov.fr/activity/p/29102/ Thu, 15 Aug 2019 14:17:12 +0200 Anyone have any idea how the power supply is connected to the Nervo Board? I\’m lost.

]]> 7 bf6913b64489998c89f2cf546ca015a4 Chuah Wei Jie a commenté une activité https://inmoov.fr/activity/p/27841/#acomment-27858 Sun, 14 Apr 2019 02:29:01 +0200 Still trying on different calibration, and it still doesn\’t fit. I\’m using PLA and the calibrator like always exceeding less than 1mm? Not really sure about that. Is the wall thickness that affect the printing exceeding the original scale?

En réponse à - Chuah Wei Jie a publié une note Finally a small step forward. Too bad it doesn’t fit together, guess I need to calibrate it again. Do I need to polish it using sand paper or anything after the printing? ]]> 5e739f0513cabf4f536a805b8bbd696e Chuah Wei Jie a publié une note: Finally a small step forward. Too bad it doesn't fit […] https://inmoov.fr/activity/p/27841/ Wed, 10 Apr 2019 08:58:45 +0200 Finally a small step forward.
Too bad it doesn’t fit together, guess I need to calibrate it again. Do I need to polish it using sand paper or anything after the printing?
]]> 6 79a12a97235fb26dd17f6c5295219ebe Chuah Wei Jie a commenté une activité https://inmoov.fr/activity/p/27788/#acomment-27817 Mon, 08 Apr 2019 01:49:20 +0200 Thanks Michael ! I\’ll try for both configuration during the printing process.

En réponse à - Chuah Wei Jie a publié une note Morning builders ! The printing process is finally get to start. I’m using Anet A8 3D Printing. I wonder is there any suggested Start and End G-Code for such machine for a better […] ]]> b7d3eec98fd06fc7c32d340acc763b3a Chuah Wei Jie a commenté une activité https://inmoov.fr/activity/p/27788/#acomment-27805 Sun, 07 Apr 2019 00:58:01 +0200 Hi Michael ! I believe it will be. Actually I\’m using Cura for the printing too. the thing that I wonder is that I\’m not sure the setting of the Basic and Advanced column will provide a good printing result or not. I had uploaded my setting interface in my album. What do you think?

En réponse à - Chuah Wei Jie a publié une note Morning builders ! The printing process is finally get to start. I’m using Anet A8 3D Printing. I wonder is there any suggested Start and End G-Code for such machine for a better […] ]]> 94a255a5f478019a9b2f89d529a1f615 Chuah Wei Jie a publié une note: Morning builders ! The printing process is finally get to […] https://inmoov.fr/activity/p/27788/ Sat, 06 Apr 2019 06:38:52 +0200 Morning builders ! The printing process is finally get to start. I\’m using Anet A8 3D Printing. I wonder is there any suggested Start and End G-Code for such machine for a better result of printing? I\’m using Cura.

]]> 5 74c0773b171156db15306ab47c711f23 Chuah Wei Jie a publié une note: Morning builders ! If I just build for the upper part (Head […] https://inmoov.fr/activity/p/27764/ Fri, 05 Apr 2019 08:35:35 +0200 Morning builders ! If I just build for the upper part (Head + Neck), I wonder how many Arduino Mega does it required?

]]> 1 46870cf9a51acb189b6de722c9b42c80 Chuah Wei Jie a commenté une activité https://inmoov.fr/activity/p/27591/#acomment-27722 Wed, 03 Apr 2019 13:10:37 +0200 I wonder is this implementation suitable by using the Microsoft HD-3000 Live Cam?

En réponse à - Valentin a publié une note New video with eyes ]]> 3bbb9bd2c5f48760197c2fe0af1a0743 Chuah Wei Jie a publié une note: Morning builders ! I wonder how many camera/s needed for the […] https://inmoov.fr/activity/p/27581/ Tue, 26 Mar 2019 04:12:22 +0200 Morning builders ! I wonder how many camera/s needed for the eye mechanism ? Is 1 more than enough?

]]> 1 0c7c1095f28c066d60817d25e393b5e3 Chuah Wei Jie a commenté une activité https://inmoov.fr/activity/p/26420/#acomment-27053 Sat, 16 Mar 2019 00:21:00 +0200 It\’s Okayy. Erm, I was targeting to build on the neck proposed by Bob Houston, as the link attached below. I wonder is that a good suggestion? Since, there are a lot of people working on it.
Link : https://www.thingiverse.com/thing:1243403

Wow. That\’s cool. I\’ll consider about it.

En réponse à - Chuah Wei Jie a publié une note Hello builders. I’m new to Inmoov but planning to work on it. Does anyone have any suggestion or reference on how to start? Currently planning to build the head and neck part. ]]> cf352f027bd57935b4e39c0bb757b1af Chuah Wei Jie a commenté une activité https://inmoov.fr/activity/p/26420/#acomment-26718 Thu, 14 Mar 2019 06:25:00 +0200 Because I\’m having my Final Year Project currently, and due the limitation of cost, building head and neck is the only way for me to accomplish my task and target, hha. I\’m searching for someone to guide me and to discuss together throughout the building process.

En réponse à - Chuah Wei Jie a publié une note Hello builders. I’m new to Inmoov but planning to work on it. Does anyone have any suggestion or reference on how to start? Currently planning to build the head and neck part. ]]> c011fc2b3d72c1485a1d92e2c5b89cc8 Chuah Wei Jie a publié une note: I probably need a guideline on how to deal with the […] https://inmoov.fr/activity/p/26441/ Thu, 21 Feb 2019 06:21:36 +0200 I probably need a guideline on how to deal with the nervo-board. Anyone have any idea?

]]> 0 7332f2739ac57c8e8b9570c91661c6e4 Chuah Wei Jie a publié une note: Hello builders. I'm new to Inmoov but planning to work on […] https://inmoov.fr/activity/p/26420/ Tue, 19 Feb 2019 08:31:07 +0200 Hello builders. I\’m new to Inmoov but planning to work on it. Does anyone have any suggestion or reference on how to start? Currently planning to build the head and neck part.

]]> 5