InMoov | Karthos | Activité

Karthos a commenté une activité

Sun, 16 Aug 2020 19:28:18 +0200

slow is smooth and smooth is fast.

En réponse à - Tom a publié une note Finally started building

Karthos a commenté une activité

Sun, 16 Aug 2020 19:27:47 +0200

fantastic work!

En réponse à - Ray Edgley a publié une note Part 9 of the building of Fred’s head is now up on YouTube. In this video I get MarySpeech working with the MouthControl service to work the jaw. Now you can see how Fred hosted the […]

Karthos a commenté une activité

Tue, 16 Apr 2019 01:55:17 +0200

Mark is right, the lower the layer height the better. I was able to fit stuff together with .3 layers until I got to the worm gears and piston shafts. needed to go all the way to .12 to get those to operate smoothly. always had my infill on 15% for most parts, the « load bearing » parts or parts I thought would be stressed I went up to 30% infill.…En afficher davantage

En réponse à - Chuah Wei Jie a publié une note Finally a small step forward. Too bad it doesn’t fit together, guess I need to calibrate it again. Do I need to polish it using sand paper or anything after the printing?

Karthos a commenté une activité

Tue, 02 Apr 2019 17:22:02 +0200

agreed, can’t wait to see some inmoov meetups, chatting to each other

En réponse à - Michael Hayward a publié une note WOW, I just saw that we are 6,001 Members worldwide, another level has been reached. what great news that the community keeps on growing!

Karthos a commenté une activité

Mon, 01 Apr 2019 03:46:28 +0200

good choice! there are some nice head mounts floating around too

En réponse à - jason fetterman a publié une note have alot of parts printed…thought id get the head going..so excited to be a part of this im burnin through the filament

Karthos a commenté une activité

Sat, 23 Mar 2019 13:51:50 +0200

Gael is aware of the situation, not sure what his plans are with it though.

En réponse à - smattachai.p a publié une note Hi Gael Langevin, I am building InMoov for 4 months with complete hardware and now working on software. I try many many time to locate my InMoov Project (Thailand) in your Google […]

Karthos a commenté une activité

Wed, 20 Mar 2019 14:56:50 +0200

Hello, The map was setup a while back and the person that set it up needs to go in and make it more public again so that people that add their locations. I wasn’t able to add mine either.

Karthos a publié une note: So is there any estimate on how many complete/incomplete […]

Thu, 14 Mar 2019 19:50:45 +0200

So is there any estimate on how many complete/incomplete inmoovs there are in the world? seems like there are about 20 or so completed with videos on them and at least a few hundred being worked on that I can find documentation on so there are probably about 3-5K worldwide I am estimating? I am wondering how many nervos have been purchased.

Karthos a commenté une activité

Thu, 14 Mar 2019 01:52:51 +0200

right on! where abouts you located? southern Idaho here.

En réponse à - Bad Buoy a publié une note Working on head torso and arms assembly

Karthos a commenté une activité

Thu, 14 Mar 2019 01:51:47 +0200

great thanks, think I will take it a lil lower and try a .1 layer height and see how that goes.

En réponse à - Karthos a publié une note I was able to calibrate my printer to get most of the parts to push fit. However still struggling with getting some neck pistons and shafts that work together right off the print-bed. I […]

Karthos a commenté une activité

Thu, 14 Mar 2019 01:50:39 +0200

oO I like the orange neck. have you started with any electronics yet?

En réponse à - Bad Buoy a publié une note Oh K here it is

Karthos a publié une note: I was able to calibrate my printer to get most of the parts […]

Wed, 13 Mar 2019 02:15:17 +0200

I was able to calibrate my printer to get most of the parts to push fit. However still struggling with getting some neck pistons and shafts that work together right off the print-bed. I got a prusa I3. What slicer software and general settings are peeps using? I was going with 20% infill and 3 perimeters with .25mm layer height. Thinking about…En afficher davantage

Karthos a commenté une activité

Wed, 13 Mar 2019 02:10:34 +0200

This is wonderful! great work. I look forward to seeing your progress.

En réponse à - Hartwig a publié une note This is my IOS programming environment I’m still making progress developing an iOS app to control a robot. Thank you Gael, InMoov is a great platform to do this kind of experiments. I ch […]

Karthos a commenté une activité

Tue, 12 Mar 2019 04:13:40 +0200

Looks Great, I am pretty much same spot as your are in the build. what did you use to hold down the cameraboard? the holes are tiny, I was thinking about some silicone to hold them in place but maybe the middle eye part will hold it down tight enough.

En réponse à - Paul Swingewood a publié une note More Eyes

Karthos a commenté une activité

Tue, 12 Mar 2019 04:11:03 +0200

prove it 😛

En réponse à - Bad Buoy a publié une note Working on head torso and arms assembly

Karthos a commenté une activité

Fri, 08 Mar 2019 17:49:11 +0200

Hmm… yeah ya know I am not to sure about that one. Are you having any errors thrown around that? I am just now starting to play with code myself.

En réponse à - Peter Schiretz a publié une note Dear Community, I am having trouble understanding two Lines of Code maybe one of you could help me out. 1. ear.addListener(« recognized », « python », « heard ») i am not sure […]

Karthos a commenté une activité

Fri, 08 Mar 2019 04:35:55 +0200

Looking Great!

En réponse à - Paul Swingewood a publié une note Started the head

Karthos a publié une note: Been pumping out the parts for a little over a month now and […]

Fri, 08 Mar 2019 04:33:49 +0200

Been pumping out the parts for a little over a month now and just about got everything but the legs and cover parts printed. Now starting to assemble, still need some nervo boards. hoping the back order isn’t too delayed as I am ordering one tomorrow.

Karthos a commenté une activité

Fri, 08 Mar 2019 04:17:03 +0200

Hmm. I will look into this a little bit I work at a newspaper and will ask the digital editor what we use for things like this, maybe we can get a new one goin while saving all the current info on it. I would be willing to tinker with it.

En réponse à - TONI AGUILAR a publié une note Hil. I do not know how to put my address on the builders map. I know how we could modify the power sources of the old PCs so that they work with 6V and with 7.4V. How could I put it […]

Karthos a commenté une activité

Fri, 08 Mar 2019 04:15:22 +0200

Hello, I got 5 of the HS-805BB for the lower stomach, head and possibly clavi part of shoulder. I have been finding some modified sleeves online to use smaller MG996r for something possibly. I noticed some people are using them for shoulder but I am still undecided. I got the chest and back plates assembled but havnt meshed them I also got most…En afficher davantage

En réponse à - Karthos a publié une note Just started printing all the parts and trying to source some servos

Karthos a commenté une activité

Thu, 24 Jan 2019 07:35:31 +0200

Well the problem is that the owner needs to make it public so that people can pin in, right now the link only allows viewing, or whomever owns it could share it with someone that can share it with new people.

Karthos a publié une note: Just started printing all the parts and trying to source some servos

Mon, 21 Jan 2019 09:12:12 +0200

Just started printing all the parts and trying to source some servos

Karthos a commenté une activité

Mon, 21 Jan 2019 09:11:19 +0200

Yes I also cannot add myself, it seems that they need to make that ability public on google\’s my maps.