InMoov | Mindless | Activité

Mindless a commenté une activité

Fri, 12 Nov 2021 07:58:39 +0200

Whats the Aussie Bush ?

En réponse à - Ray Edgley a publié une note Fred’s been at me for a while now on getting him some Arms. Here is the start of the left Bicep. https://youtu.be/qp47Vs5MT60

Mindless a commenté une activité

Fri, 12 Nov 2021 07:36:41 +0200

Yep,,,,, Disappeared into the Aussie Bush for 3yrs blowing the head off « Skippy the bush Kangaroo » for something to eat,,_+-l-:: thank god for Solar panels-}-} -but back in the city now.

En réponse à - Ray Edgley a publié une note Fred’s been at me for a while now on getting him some Arms. Here is the start of the left Bicep. https://youtu.be/qp47Vs5MT60

Mindless a commenté une activité

Fri, 12 Nov 2021 06:18:30 +0200

Cool,,, –+

En réponse à - Ray Edgley a publié une note Fred’s been at me for a while now on getting him some Arms. Here is the start of the left Bicep. https://youtu.be/qp47Vs5MT60

Mindless a commenté une activité

Fri, 07 Sep 2018 14:44:42 +0200

Awesome Finish,,, My Only warning is that Pressurized Vapor is actually about 1/8 to a 1/2 stick of TNT,,,, 2Tbps of Petrol Pressurized and Vapor is about 1/2 a stick,,, Acetone Can be just as dangerous So be Careful Dude,,,, they don’t normal tell you that in the Instruction Book,,,,,,, once again Awesome finish

En réponse à - Rick a publié une note I am experimenting with how acetone vapor smooths the surface of ABS filament. This boat benchy was place in a vapor bath for 30 minutes. I plan on doing this with my Inmoov.

Mindless a commenté une activité

Fri, 23 Feb 2018 06:40:05 +0200

Awesome work,,, The Clean Prints and Cable Wraps really makes him a Fine Specimen

En réponse à - Bob Houston a publié une note I’ve added some new parts to my InMoov.

Mindless a publié une note: Hay Guys & Girls -Mr Gail I almost finished organizing all […]

Thu, 22 Feb 2018 04:02:31 +0200

Hay Guys & Girls -Mr Gail
I almost finished organizing all the files and stuff for my Modded Inmoov Arm – I will be posting it on Wevolver and NoT Thingiverese ,,,
I found this YouTube Video on my downtime that a though was really worth sharing even though its got nothing to do with Inmoov but at that some time it could – ,, anyway this will be…En afficher davantage

Mindless a commenté une activité

Thu, 22 Feb 2018 03:50:10 +0200

No worrries Perry,,, i thought is was rather cool and worth sharing 🙂
P.S- I posted one more that is very interesting

En réponse à - Mindless a publié une note Hay Guys,,, Not sure how many of ya have seen this,,,, but this Dude is my kind of Robotic Engineer and deserves A+++ https://www.youtube.com/watch?v=3RBSkq-_St8

Mindless a publié une note: Hay Guys,,, Not sure how many of ya have seen this,,,, but […]

Mon, 19 Feb 2018 23:26:35 +0200

Hay Guys,,, Not sure how many of ya have seen this,,,, but this Dude is my kind of Robotic Engineer and deserves A+++

Mindless a commenté une activité

Sat, 27 Jan 2018 22:27:55 +0200

Very nice finish ,,, i assume it’s a Acetone finish–

En réponse à - Vandamme a publié une note

Mindless a commenté une activité

Tue, 16 Jan 2018 22:18:45 +0200

Cool,,,, Modding Inmoov is very addictive –,,

En réponse à - Mindless a publié une note Some more Mod work on the Forearms,,, The Female Receiver (Hinge /Bolt Section) has been Thickened up a lot to make it as Strong as Possible ( there’s still 3 to 4mm Clearance during […]

Mindless a commenté une activité

Mon, 15 Jan 2018 00:40:46 +0200

Awesome work Guy’s,,,,, Please keep Posting Updates as your work Progresses – 🙂

En réponse à - Nse Obot a publié une note Hi all, I’m working on developing bipedal locomotion for the InMoov robot. So, I built a model of it in the Choreonoid robotics simulator. Check out the video for more info and feel […]

Mindless a publié une note: Some more Mod work on the Forearms,,, The Female Receiver […]

Sun, 14 Jan 2018 23:45:02 +0200

Some more Mod work on the Forearms,,, The Female Receiver (Hinge /Bolt Section) has been Thickened up a lot to make it as Strong as Possible ( there’s still 3 to 4mm Clearance during Rotation Cycle ) — the Interior has been Gutted-Out so only the Servo Bed Mounts are left ( and the Section where i Stitched to the x2 Parts together),,,

The…En afficher davantage

Mindless a commenté une activité

Sun, 14 Jan 2018 20:17:52 +0200

Awesome,,,, ya can never too many sets of different Pliers–,, 🙂

En réponse à - Carlos Vazquez a publié une note If official, we have started to make our own inmoov in Chula Vista Vs. this is my son dream of making a robot, I’m just the helper.

Mindless a commenté une activité

Sun, 14 Jan 2018 11:59:47 +0200

This is the start-up pack most people get when they start building stuff,,,, and i’m 90% sure this is what Mr Gael and everyone uses for inmoov ,,,,,you can track the individual springs down on eBay but it can take a bit of time to track down– these packs are all over…En afficher davantage

En réponse à - Anmar Mashat a publié une note Hello every one, i am new here and this is my first post here so i am welling to make my inmoov i got all the servo i need but i want to ask about extension spring 0.51mm diameter, […]

Mindless a commenté une activité

Sun, 14 Jan 2018 10:21:13 +0200

Lol,,, next pic will be with Inmoov ,, I\’m 35yo in this pic and i just turned 40 –,,, Still look the Same which is kinda weird – ,,lol

En réponse à - Mindless a publié une note No Finished Inmoov this Year but made a lot of Modded Structural Progress and Tried Many Different R&D ideas,–, Im designing with a lot of future ideas in mind — so here is a Pic of Me […]

Mindless a commenté une activité

Tue, 09 Jan 2018 14:10:38 +0200

Damian got a pic of his inmoov a few Post down ( Muiti-Coloured one),,, he has got the Front and Back Chest Plates plus the 2 Center Beams Fully built — ,, Personally i would do that ,, but do not Permanently join them together — you can permanently join each of the smaller plate pieces together in to Make the 4 Major section ( Front/Back…En afficher davantage

En réponse à - John Hughes a publié une note Hi. This is how far I have got my project. I have the head upright on the basic shoulder parts. I have my servos on order so I will be doing some work on wiring it up soon. The […]

Mindless a commenté une activité

Fri, 05 Jan 2018 08:22:43 +0200

Just looked at the Pic you Uploaded,—- Very Impressive,,,,,,Very Impressive indeed ,,,

En réponse à - Rohmer a publié une note

Mindless a commenté une activité

Fri, 05 Jan 2018 07:59:02 +0200

Wow,,,,, Thanks for the info– that\’s some serious hardware your running–,,

En réponse à - Rohmer a publié une note

Mindless a commenté une activité

Fri, 05 Jan 2018 07:21:05 +0200

The Pad looks pretty big,,, what size screen and OS is it running ?,,, i have been looking to buy i new one since my last one Bounced across a concrete floor,,,

En réponse à - Rohmer a publié une note

Mindless a commenté une activité

Fri, 05 Jan 2018 06:56:03 +0200

Awesome ,,,, I like the “Pad” at the Front,,,, wheres the menu screen so he can go make me a Cheeseburger –.. lol

En réponse à - Rohmer a publié une note

Mindless a commenté une activité

Fri, 05 Jan 2018 06:44:30 +0200

Cool,,, slow and steady is a good approach for inmoov i think–,, i like taking my time with each section Printing and Re-Printing then Modding then Re-printing and Modding, then Re- Printing,,, well you get the idea– ,, Inmoov is one of them Rare Projects that keeps you excited because of the potential of what he can become–,,

En réponse à - Richard Tracy, II a publié une note I’ve been working on the Inmoov robot since March of last year. I haven’t hooked up any electronics but am excited to start once I’ve completed the arms.

Mindless a publié une note: No Finished Inmoov this Year but made a lot of Modded […]

Thu, 04 Jan 2018 12:36:52 +0200

No Finished Inmoov this Year but made a lot of Modded Structural Progress and Tried Many Different R&D ideas,–, Im designing with a lot of future ideas in mind — so here is a Pic of Me Instead — Since i Post Here a fair bit its Always Good to have a Real Face to a Name–,,

Mindless a commenté une activité

Thu, 04 Jan 2018 11:33:52 +0200

i know what you mean,,, it took me a few attempts to get the dimensions correct so when they are 3D Printed the dimensions are correct–,, (that statement sounds kinda weird,,,lol)

En réponse à - Mindless a publié une note This is a“Free Spinning “ Version of the Savox Servo SV 0236MG https://www.thingiverse.com/thing:2736500

Mindless a commenté une activité

Thu, 04 Jan 2018 10:20:18 +0200

Cool,,, Nice write up– i enjoy reading stuff like that —

En réponse à - Stefan a publié une note After finally adding the legs to my Inmoov I wrote a résumé about that last 3 years was putting all those parts together. In my post at st […]

Mindless a commenté une activité

Sun, 31 Dec 2017 11:02:42 +0200

I\’ve Got a Modded \ »ElbowGearHolder\ » that removes the Moment Limits for the Forearm ,,,, but the \ »Knock On Effect\ » is terrible if something goes wrong,,,

En réponse à - Mindless a publié une note Like this Damian,,,

Mindless a commenté une activité

Sun, 31 Dec 2017 10:41:24 +0200

I rebuilt all of Inmoovs parts in SketchUp so i can Mod the design to my specs,,, i know what you mean about the Elbow not rotating 90degs,,,,, but dont worry about it ,,,,, it will all make sense when the arm is built

En réponse à - Mindless a publié une note Like this Damian,,,

Mindless a commenté une activité

Sun, 31 Dec 2017 10:24:10 +0200

Your right,,, i just looked at some photos of the build process and Mr Gael just turns the piece around like you have,,,, so there should be a problem,,,,

En réponse à - Mindless a publié une note Like this Damian,,,

Mindless a publié une note: Like this Damian,,,

Sun, 31 Dec 2017 09:05:53 +0200

Like this Damian,,,

Mindless a commenté une activité

Sun, 31 Dec 2017 08:56:12 +0200

I might be wrong but i think you printed the wrong side of the \ »ElbowShaftGear\ » or its back to front ,,,?

En réponse à - Damian a publié une note I’m bit confused now about maximum positions of ElbowShaftGear, from my point of view elbow will never go to straight position or am i wrong? i printed latest files and not sure what im […]

Mindless a commenté une activité

Sun, 31 Dec 2017 01:27:09 +0200

Hay your right they did get the extra Servo hooked and-up working by the looks of it,,, but i have No idea on using it,,, -I\’m still a primate when comes to certain stuff,,,,, and the control mechcanizime for the fingers is one of them ,,,,, sorry dude

En réponse à - Simon Cartlidge a publié une note Just getting started out, I’m really looking forward to the whole adventure of building this, I have been teasing my 17 year old son that I’m building a replacement son for when […]

Mindless a commenté une activité

Sat, 30 Dec 2017 05:37:23 +0200

Yep,,, there so handy for testing new frames designs without having to spend a lot of money,,,, i’ve got x4 Arms in testing stages so that around $1200 if i had run real servos,, there only usefully for people like me he do a lot of Mod work on the Structural Frames –( but thought i would post them anyway)– almost got a printable gear drive…En afficher davantage

En réponse à - Mindless a publié une note This is a“Free Spinning “ Version of the Savox Servo SV 0236MG https://www.thingiverse.com/thing:2736500

Mindless a publié une note: This is a“Free Spinning “ Version of the Savox Servo SV 023 […]

Fri, 29 Dec 2017 10:15:49 +0200

This is a“Free Spinning “ Version of the Savox Servo SV 0236MG
https://www.thingiverse.com/thing:2736500

Mindless a commenté une activité

Fri, 29 Dec 2017 05:03:44 +0200

Awesome,,,

En réponse à - Damian a publié une note First movements….

Mindless a commenté une activité

Fri, 29 Dec 2017 04:53:31 +0200

Hay Simon ,,,Last time a looked at the articulated thumb by Anar it is just a manual adjuster with no Servo based movement,,,,

Mindless a commenté une activité

Wed, 27 Dec 2017 02:54:09 +0200

Currently using PLA+ by Esun –,, its tough as hell ( flexible ) and it doesn’t swell like other filaments but getting a good surface finish took a while to tune-in,,,,, great for prototyping parts never have a first layer issues on cold beds and its cheap,,,,,, this is a pic of the Screw/Bolt Together Arm — got to some more mod work the B…En afficher davantage

En réponse à - Mindless a publié une note

Mindless a publié une note:

Tue, 26 Dec 2017 07:06:54 +0200

Mindless a commenté une activité

Mon, 25 Dec 2017 03:50:36 +0200

https://www.thingiverse.com/thing:2730536

En réponse à - Mindless a publié une note ————————————————–= Merry Christmas […]

Mindless a publié une note: --------------------------------------------------= Merry […]

Sun, 24 Dec 2017 21:56:41 +0200

————————————————–= Merry Christmas =——————————————————

Mindless a publié une note: Still doing some Refining work,,,, because all the […]

Thu, 21 Dec 2017 10:33:54 +0200

Still doing some Refining work,,,, because all the Dove-Tails have Screws the building procedure is a strict sequence–,,

Mindless a commenté une activité

Tue, 19 Dec 2017 02:34:09 +0200

Yep,, that right,,, buy all different Sandpaper Grades in the small rolls or sheets you will need some 800grit for sanding between coats of the Spray Putty and 1200grit for Sanding between the finish coats but get some 250grit /400grit/600grit for the rough work it just depends on how rough the Plastic Surface is to start with – Dulux have r…En afficher davantage

En réponse à - John Hughes a publié une note Hi. So I am starting to reprint my inmoov from scratch. I started with some cheap filament that came on 250g rolls, but now I am buying 1kg rolls but its whiter and I want a uniform […]

Mindless a commenté une activité

Tue, 19 Dec 2017 01:29:02 +0200

Ok Cool,,,,, just saying there’s a few people who “jump the gun” when they first get there 3d printer and pick the Most difficult Project as there first Project,,,(Crash&Burn) I love that there enthusiastic for 3d printing but build one of “EricThePoolBoy” Engines first,,,, It’s a great first “advance” project – ,,- Inmoov is unlike any Projec…En afficher davantage

En réponse à - John Hughes a publié une note Mindless, I appreciate your comments. I am up to the task. I have built a life size R2D2, Dalek, B9 Lost in Space Robot, done the electronics. But I always seem to take one step […]

Mindless a commenté une activité

Mon, 18 Dec 2017 11:20:15 +0200

Hay Hughes,,, It would be Wise to Really Study the Inmoov Project before Stating it again,,, this the most Complicated and Expensive Project available for 3Der’s & Modders ,,,,, And Good Hands On Mechanical & Software Design Experience a Must Have Pre-Request,,,, there’s a lot of Bugs that still have to worked out so re-printing parts is Nor…En afficher davantage

En réponse à - John Hughes a publié une note Hi. Just had a frustrating day, printing the Lower back of the head to only realize the stl I downloaded a month or so ago was out of date. The one I printed was in two parts and […]

Mindless a commenté une activité

Sat, 16 Dec 2017 23:51:13 +0200

Awesome,,, It’s great to see your R&D work on his mechanical operation for this section–,,,

En réponse à - Gael Langevin a publié une note Hello InMoov builders! Here is a view of the knee actuation. This is done via MyRobotLab with the DIY Servo service. More to come with the Ankle and Thigh actuation.

Mindless a publié une note: Here ya go Acapulco Rolf should be all […]

Fri, 15 Dec 2017 10:10:36 +0200

Here ya go Acapulco Rolf should be all good,,,
https://www.thingiverse.com/thing:2716298

Mindless a commenté une activité

Fri, 15 Dec 2017 03:11:11 +0200

No worries,,, I’ll download the new V3 Parts,,,,
I really should of checked that out first but it didn’t even occur to me to have a look for a updated part,,,, anyway cheers mate–,,

En réponse à - Mindless a publié une note Hay Guys Mr Gael,,, just wondering about these X2 Nut/Bolt Holes when they line up the “Front Skin” is sticks out by 3.8mm — ,, is this meant to be like this ? –,,

Mindless a publié une note: Hay Guys Mr Gael,,, just wondering about these X2 Nut/Bolt […]

Thu, 14 Dec 2017 02:52:05 +0200

Hay Guys Mr Gael,,, just wondering about these X2 Nut/Bolt Holes when they line up the “Front Skin” is sticks out by 3.8mm — ,, is this meant to be like this ? –,,

Mindless a publié une note: Still need a Bum,,,,,lol

Wed, 13 Dec 2017 06:55:30 +0200

Still need a Bum,,,,,lol

Mindless a commenté une activité

Fri, 08 Dec 2017 23:19:23 +0200

Hell that’s alright,,, didn’t even know window 10 had a 3d Builder/Viewer ,,,, I see its “HoloLens” compatible which is very cool and will be the next gen of software,,, at $5000k its still a bit too expensive and there’s not enough software add-on’s yet and Object manipulation within the holographic interface is still in its early phases,,,,,…En afficher davantage

En réponse à - Acapulco Rolf a publié une note InMoov Legs and Articulating Stomach Work in progress… Thanks Gael Thanks Bob Thanks Bartods

Mindless a commenté une activité

Fri, 08 Dec 2017 21:26:17 +0200

Cool,,, which software ya using for the model-?,, its looking good–,,

En réponse à - Acapulco Rolf a publié une note InMoov Legs and Articulating Stomach Work in progress… Thanks Gael Thanks Bob Thanks Bartods

Mindless a commenté une activité

Fri, 08 Dec 2017 21:21:47 +0200

Lmao—I didn’t know where it was coming from at first,,, just this random- sshhhiiiiittt -,,

En réponse à - Bill a publié une note So anybody else Notice the thumb print on the web says Sh*t now Instead of Inmoov ????