InMoov | Stefan Ekstam | Activité https://inmoov.fr/members/stefanekstam/activity/ Activités de Stefan Ekstam Wed, 22 Apr 2026 05:44:44 +0200 https://buddypress.org/?v=10.6.0 fr-FR 30 hourly 2 0f39c52e30cd78e1437c7ac0850c7d1e Stefan Ekstam a publié une note: I finally decided that the time had come to finish my […] https://inmoov.fr/activity/p/17538/ Tue, 25 Apr 2017 09:11:52 +0200 I finally decided that the time had come to finish my InMoov. After some grinding, the hardware is now complete to 98 %. 🙂

After trying some of the most recent versions of MyRobotLab (and failing miserably), I tried the older « Kraken » version (1.0.1723) and things worked a lot better. So far I have bricked two LiPo batteries calibrating all…En afficher davantage

]]> 5 704070a6bcb795d121bfdd7811994e25 Stefan Ekstam a commenté une activité https://inmoov.fr/activity/p/11838/#acomment-11861 Tue, 30 Aug 2016 20:12:24 +0200 If you should ever try, and get stuck, I could probably help you out. 🙂 After my adventure with the almost bricked computer, I’m now an expert on the Lenovo Thinkpad 8. I contacted both Lenovo’s local repair agent, and Lenovo’s official technical support when I couldn’t make the computer respond, but none of them could help, interestingly…En afficher davantage

En réponse à - Stefan Ekstam a publié une note I realized that the Lenovo Thinkpads were no longer possible to buy new in any Swedish stores. Thanks to eBay I managed to get one from Germany though. After almost bricking it by […] ]]> e8f15674b7587f1b1223552162b0398c Stefan Ekstam a commenté une activité https://inmoov.fr/activity/p/11838/#acomment-11844 Tue, 30 Aug 2016 06:04:08 +0200 Hmm, I meant I have *now* got it working. 🙂

En réponse à - Stefan Ekstam a publié une note I realized that the Lenovo Thinkpads were no longer possible to buy new in any Swedish stores. Thanks to eBay I managed to get one from Germany though. After almost bricking it by […] ]]> ba8641e5dca64e34c2e8ebcff86bdab5 Stefan Ekstam a publié une note: I realized that the Lenovo Thinkpads were no longer possible […] https://inmoov.fr/activity/p/11838/ Mon, 29 Aug 2016 21:28:31 +0200 I realized that the Lenovo Thinkpads were no longer possible to buy new in any Swedish stores. Thanks to eBay I managed to get one from Germany though. After almost bricking it by upgrading to Windows 10 in a nonstandard way, I have not got it working. It\’s time to download MyRobotLab and start printing out the new back parts! 🙂

]]> 3 edca234999629b960e2cd9699d406c19 Stefan Ekstam a commenté une activité https://inmoov.fr/activity/p/11622/#acomment-11749 Tue, 23 Aug 2016 21:06:49 +0200 Yes, I remember seeing that a long time ago. 🙂 I will probably let my InMoov keep its chair base until the legs are finished. But no pressure Gael, please take your time. There are many other things that need to be done first. 🙂

En réponse à - Stefan Ekstam a publié une note I just visited the InMoov website for the first time this summer, and realized that Gael had actually updated quite a few things. Nice! 🙂 Naturally, I restarted my dormant InM […] ]]> 2f9cbc75bbd64bbdf6163a2a2078e7aa Stefan Ekstam a commenté une activité https://inmoov.fr/activity/p/11622/#acomment-11646 Wed, 17 Aug 2016 09:44:14 +0200 Exactly! Chair bases of the world, unite! You now have a purpose!

En réponse à - Stefan Ekstam a publié une note I just visited the InMoov website for the first time this summer, and realized that Gael had actually updated quite a few things. Nice! 🙂 Naturally, I restarted my dormant InM […] ]]> f31457d6ffa0cb1fcb8afaeffa908bed Stefan Ekstam a commenté une activité https://inmoov.fr/activity/p/11622/#acomment-11645 Wed, 17 Aug 2016 09:40:51 +0200 Ah, you remember that. 🙂 I actually got another printer just like the one that was damaged, and then I took a chance and sent the broken one for repair. Amazingly enough it was totally repairable, so now I have two Flashforge Dreamers working for me. 🙂

En réponse à - Stefan Ekstam a publié une note I just visited the InMoov website for the first time this summer, and realized that Gael had actually updated quite a few things. Nice! 🙂 Naturally, I restarted my dormant InM […] ]]> b752ccd16b338f404774c24775700425 Stefan Ekstam a publié une note: I just visited the InMoov website for the first time this […] https://inmoov.fr/activity/p/11622/ Tue, 16 Aug 2016 11:41:25 +0200 I just visited the InMoov website for the first time this summer, and realized that Gael had actually updated quite a few things. Nice! 🙂 Naturally, I restarted my dormant InMoov project and celebrated by mounting him to his very own chair base.
]]> 7 9e2db5b515ed251f3222071d926c52d5 Stefan Ekstam a publié une note: I had to wait forever for my Chinese fishing line to arrive, […] https://inmoov.fr/activity/p/8761/ Tue, 29 Dec 2015 21:25:26 +0200 I had to wait forever for my Chinese fishing line to arrive, but once it arrived I got going again. Now the left arm, hand and bicep are finished, except for the fingertips. Everything works as it should with the Arduino.

Unfortunately my 3D printer has been destroyed in a fire, so there might be some time until I can continue with this project.…En afficher davantage

]]> 1 4a4cbb8d1e1257cc733b40a31fcbf2a5 Stefan Ekstam a commenté une activité https://inmoov.fr/activity/p/6002/#acomment-6021 Fri, 25 Sep 2015 10:03:55 +0200 Ah yes, I was afraid that carving of the plastic would be a problem. I\’ll use my 0.4mm for the simpler finger tester then, just to be able to test something. 🙂
Quite impressive that the hand could do that much work without breaking. You\’re clearly in the industrial quality segment here. 🙂

En réponse à - Stefan Ekstam a publié une note Report from the trenches: The right hand is coming along well. Today I had my first shortcircuit which caused a minor fire on my desk, but everything went ok in the end. Better not […] ]]> e474aa88676b2ba27fc30166481c8296 Stefan Ekstam a commenté une activité https://inmoov.fr/activity/p/6002/#acomment-6019 Fri, 25 Sep 2015 09:07:26 +0200 Yes, I have followed your recommended settings fully. I’m using a FlashForge Dreamer 3D printer with ABS, and this is the first time I have had a problem. I have now reprinted the fingers with 3 shells instead of 1, and I’m ready to retry the drilling later today.
I’m impressed with the quality of the InMoov model. When assembling the wrist…En afficher davantage

En réponse à - Stefan Ekstam a publié une note Report from the trenches: The right hand is coming along well. Today I had my first shortcircuit which caused a minor fire on my desk, but everything went ok in the end. Better not […] ]]> 602b8a8316560d0375c8b16878a74529 Stefan Ekstam a publié une note: Report from the trenches: The right hand is coming along […] https://inmoov.fr/activity/p/6002/ Thu, 24 Sep 2015 16:09:43 +0200 Report from the trenches: The right hand is coming along well. Today I had my first shortcircuit which caused a minor fire on my desk, but everything went ok in the end. Better not get too sloppy when working on a project like this. 🙂

I will have to reprint the fingers, since they tend to break far too easily when I try to redrill the holes for…En afficher davantage

]]> 4 768c79042183961ba98f10ad5294b4e9 Stefan Ekstam a publié une note: Most parts printed for the right hand and wrist. Tomorrow my […] https://inmoov.fr/activity/p/5939/ Sun, 20 Sep 2015 19:21:10 +0200 Most parts printed for the right hand and wrist. Tomorrow my first batch of servos should arrive from HobbyKing. Managed to get one Arduino Mega today, and tomorrow I’ll hopefully get most of the screws. Fishing line has been ordered on Ebay, but it won’t be delivered until late October, unfortunately. It seems my printer, a FlashForge Dreamer,…En afficher davantage

]]> 0 51d6ed68e48184b20ced975000df559c Stefan Ekstam a commenté une activité https://inmoov.fr/activity/p/5822/#acomment-5860 Sat, 19 Sep 2015 12:48:36 +0200 Thanks for the tip! I will print the Servobed to check this as soon as possible. The servos have not arrived yet, and the final parts of the right hand and arm will be printed this weekend, so I\’ll just have to hope that the parts I have printed so far will not be completely unusable… I\’m using ABS by the way, since that was Gael\’s recommendation.

En réponse à - Stefan Ekstam a publié une note Just got going with the InMoov. My 3D printer is working day and night printing the right hand and wrist parts. Lots of servos ordered from HobbyKing. Just ordered two Nervo Boards […] ]]> 0b924f79ceeaf14b16eb481de3b994fd Stefan Ekstam a commenté une activité https://inmoov.fr/activity/p/5822/#acomment-5831 Fri, 18 Sep 2015 06:16:17 +0200 I bet! And thank you for initiating and continuing this project. I had huge problems with my 3D printer, and was getting ready to return it to the store. Then I found the InMoov project, and realized I simply had to get the printer working just to be able to build my own robot. And two days later I had fixed almost all of the problems and decided…En afficher davantage

En réponse à - Stefan Ekstam a publié une note Just got going with the InMoov. My 3D printer is working day and night printing the right hand and wrist parts. Lots of servos ordered from HobbyKing. Just ordered two Nervo Boards […] ]]> add965e0f146b8c6598e9d6bf39214b4 Stefan Ekstam a publié une note: Just got going with the InMoov. My 3D printer is working day […] https://inmoov.fr/activity/p/5822/ Thu, 17 Sep 2015 14:57:19 +0200 Just got going with the InMoov. My 3D printer is working day and night printing the right hand and wrist parts. Lots of servos ordered from HobbyKing. Just ordered two Nervo Boards from the InMoov shop. I hope to have both arms printed when they arrive. 🙂

]]> 4