https://inmoov.fr/members/uboats/activity/ Activités de Aaron Wegner Fri, 03 Apr 2026 19:29:24 +0200 https://buddypress.org/?v=10.6.0 fr-FR 30 hourly 2 eab9cdc9a2ec84294b1820d7b0babdf5 https://inmoov.fr/activity/p/10558/#acomment-10595 Thu, 12 May 2016 01:36:10 +0200 as per above I posted above this is 2 pieces and needed to be glued together. Since I use ABS plastic for my prints. Splitting is a real problem for tall thin items which only get worse for really all items. Lower shrinkage plastic – like PLA may work better for a combined part.
I consider this version a prototype and I have decided to start work…En afficher davantage

En réponse à - Aaron Wegner a publié une note ]]> 129b900bd351b9a7351c5b764f3517e1 https://inmoov.fr/activity/p/10558/#acomment-10594 Thu, 12 May 2016 01:26:24 +0200 I printed the forearm as two pieces for top and bottom (4 pieces total) and glued together as per instructions. Since I print with ABS plastic , I typically use the acetone glue method, however for the top and bottom of the forearm the mating surfaces don’t have uniform contact so the joint was weak. So after tacking with acetone glue I injected…En afficher davantage

En réponse à - Aaron Wegner a publié une note ]]> 197f352525fb097a4025ffe1f9c43a96 https://inmoov.fr/activity/p/10559/ Sun, 08 May 2016 17:41:20 +0200 So far in this project I have converted all the right hand stl files to CAD files (I use inventor). I have had to make many corrections and additions to make things fit right as well as fix weak areas in the prints using thin (0.8mm) strips. I use acetone glue to attach the strips to strengthen the arm which has broken on me a couple of times as…En afficher davantage

]]> 0 2883bc8058b3227a707518bc48db17a7 https://inmoov.fr/activity/p/10558/ Sun, 08 May 2016 17:34:58 +0200

]]> 5 f3434d698a4d8486a0424b3d5a4f716c https://inmoov.fr/activity/p/10557/ Sun, 08 May 2016 17:34:15 +0200 About 90% done with the right hand. Just need to wire up the board and program in Arduino. This last bit I am leaving to some STEM kids in middle school

]]> 0 2916c7d06015e0dda0dcfbbff45c47df https://inmoov.fr/activity/p/9848/ Tue, 01 Mar 2016 21:32:07 +0200 I currently working as a robotics mentor for a local Middle School. The class has been focusing on VEX robotics competitions. With the competitions being over for most, I am looking to introduce them to the InMoov robot. The class has experience with mechanical builds, motors and servos, 3D printing, Arduino and CAD, which all fit in with the…En afficher davantage

]]> 1