InMoov | Steve Rayner | Activités des amis

Tonzatonka a publié une note: http://inmoov.fr/members/robertwpeterson/album/picture/1982/

Tue, 10 Mar 2020 12:22:27 +0200

http://inmoov.fr/members/robertwpeterson/album/picture/1982/

Tonzatonka a publié une note: Not sure if my hip covers are correct. The file labeled left […]

Tue, 10 Mar 2020 12:20:41 +0200

Not sure if my hip covers are correct. The file labeled left didn’t seem correct on the left side. I ended up swapping the two. Are the files possibly mis-labeled, or are my hip covers wrong?
Got the neopixel ring working, just trying to see where I can mount the uno, or if I will have to swap it for a nano because of space.

Tonzatonka a commenté une activité

Tue, 10 Mar 2020 09:06:16 +0200

Have you had any luck with this? I was having a similar issue. I wasn’t sure if it was hardware,wiring or software. I ended up removing the signal resistor and using Arduino IDE. I was able to run example animations on all pixels just fine thereafter. Still no luck though in MRL.

En réponse à - Steve Rayner a publié une note In MyRobotLab I selected 16 led neopixel ring, but only 12 leds light up. Anyone know if this is an issue with myrobotlab or maybe I have a bad neopixel ring.

Tonzatonka a commenté une activité

Sun, 08 Mar 2020 15:35:29 +0200

Fantastic! This is turning out great!

En réponse à - Gerard Espona a publié une note Hey ! sharing some progress after joining stomach and torso.

Tonzatonka a commenté une activité

Tue, 25 Feb 2020 15:58:37 +0200

Thank you both! I use an open source program called gimp to remove the background. Looks good on white, but it looks better on black.

En réponse à - Tonzatonka a publié une note http://inmoov.fr/members/robertwpeterson/album/picture/1977/ stomach is coming along!

Tonzatonka a publié une note: http://inmoov.fr/members/robertwpeterson/album/picture/1977/ […]

Sun, 23 Feb 2020 12:49:50 +0200

http://inmoov.fr/members/robertwpeterson/album/picture/1977/
stomach is coming along!

Tonzatonka a publié une note:

Wed, 12 Feb 2020 13:19:42 +0200

Tonzatonka a publié une note: Almost Done Printing The Hands!

Wed, 12 Feb 2020 13:18:26 +0200

Almost Done Printing The Hands!

Tonzatonka a commenté une activité

Fri, 07 Feb 2020 18:30:07 +0200

It is also quite a useful tool for repairing damaged prints avoiding reprinting the entire part. Saves printer time and material!

En réponse à - Tonzatonka a publié une note I’m trying something different to connect the two halves of each of the bicep covers. Rather than glue, I am using a 3d printing pen to weld the parts together. So far, it is working […]

Tonzatonka a publié une note: I'm trying something different to connect the two halves of […]

Fri, 31 Jan 2020 13:16:26 +0200

I’m trying something different to connect the two halves of each of the bicep covers. Rather than glue, I am using a 3d printing pen to weld the parts together. So far, it is working fantastic and it produces a very strong bond!

Tonzatonka a commenté une activité

Fri, 31 Jan 2020 13:04:37 +0200

Thank You ! I have all the eyes, head and neck servos running, but no others yet.
Trying to strike a balance between printing the parts and purchasing the servos.

En réponse à - Tonzatonka a publié une note Left Bicep Covers Are On!

Tonzatonka a publié une note: Left Bicep Covers Are On!

Wed, 29 Jan 2020 19:05:11 +0200

Left Bicep Covers Are On!

Tonzatonka a commenté une activité

Tue, 28 Jan 2020 00:49:35 +0200

You are so kind. Thank you very much! What a fantastic project!

En réponse à - Tonzatonka a publié une note https://youtu.be/DpruPULWFbk

Tonzatonka a publié une note: https://youtu.be/DpruPULWFbk

Sun, 26 Jan 2020 17:22:36 +0200

Tonzatonka a publié une note: Eyes,head & neck servos all operational!

Sat, 25 Jan 2020 20:57:55 +0200

Eyes,head & neck servos all operational!

Mark Peterson a publié une note: Having printed the entire forearm and hand assemblies, I'm […]

Sun, 05 Jan 2020 04:24:09 +0200

Having printed the entire forearm and hand assemblies, I’m still waiting for the braided cable to come in so that I can string everything and check all rotations, extensions and retractions. I’m excited to say that things have been going relatively smooth. I am having issues with the print of the eyeglassV4 for some reason. I also am going to…En afficher davantage

Le profil de Tonzatonka a été mis à jour

Fri, 27 Dec 2019 22:17:53 +0200

Mark Peterson a publié une note: Just getting started on a new build. I started looking at […]

Wed, 25 Dec 2019 11:46:25 +0200

Just getting started on a new build. I started looking at building the hand back in early 2013. I had put things on hold since a student was wanting to do a senior project on this. So as not to seem like I was competing or trying to show her up, I paused. Now 6 years later and that many years experience in building robots for FIRST Robotics, I am…En afficher davantage