InMoov | Mark Seaton | Activité

Mark Seaton a commenté une activité

Thu, 16 May 2019 06:38:25 +0200

It hasn’t been working for ages.

En réponse à - JRenta a publié une note I am having trouble adding our location to Google Maps. I requested permissions. I’m trying again.

Mark Seaton a commenté une activité

Sun, 21 Apr 2019 05:09:48 +0200

Gael has a new video on the main page is a link or his youtube channel. it is about the elbow, but has info on exactly how to set the servo’s

En réponse à - smattachai.p a publié une note I tried to set servo motor for finger but it did not stay in the zero position. I did easy command as follows. #include Servo myservoindex; // set 0 position void setup() { […]

Mark Seaton a commenté une activité

Tue, 16 Apr 2019 00:25:56 +0200

My first parts were printed at .24 and didn’t fit so well. I then printed at .15 and they all fit together nicely. Also looked a lot better as finished product.

En réponse à - Chuah Wei Jie a publié une note Finally a small step forward. Too bad it doesn’t fit together, guess I need to calibrate it again. Do I need to polish it using sand paper or anything after the printing?

Mark Seaton a commenté une activité

Sat, 23 Mar 2019 01:44:40 +0200

That is going to be one colourful robot 🙂

En réponse à - Karthos a publié une note Been pumping out the parts for a little over a month now and just about got everything but the legs and cover parts printed. Now starting to assemble, still need some nervo boards. […]

Mark Seaton a commenté une activité

Wed, 13 Mar 2019 14:02:04 +0200

I have an anet a6 and found that I got best results using slic3r pe and using .16 layer. I also used 30% infill. First piston I did, I had .24 and it was a pain, when I went to .16 all others are smooth as.

En réponse à - Karthos a publié une note I was able to calibrate my printer to get most of the parts to push fit. However still struggling with getting some neck pistons and shafts that work together right off the print-bed. I […]

Mark Seaton a publié une note: Akbar Ana is a scammer, please ignore and delete them!

Thu, 07 Mar 2019 11:36:34 +0200

Akbar Ana is a scammer, please ignore and delete them!

Mark Seaton a commenté une activité

Wed, 30 Jan 2019 23:57:10 +0200

I use .16 layer height. and have just made sure my printer is setup correctly. making sure there is no wobble or ringing etc. The first piston I did was the neck piston and it was terrible, I had to put some dry lube in and put it in a vice and turn it with pliers to get it to move, but after I got me printer sorted out, all the other pistons etc…En afficher davantage

En réponse à - Solas Jansen a publié une note Hey everyone. Im still having trouble printing my neck pistons, and they wont thread. What slicer settings are working for you guys?

Mark Seaton a commenté une activité

Tue, 29 Jan 2019 01:54:38 +0200

No walking available yet, only legs for display as is suggested on legs page.

En réponse à - ASTOUNDER a publié une note Hello Gael ,can you add a tutorial on leg mechanisms for walking

Mark Seaton a commenté une activité

Fri, 04 Jan 2019 01:37:19 +0200

The original design was for everything to be able to be printed on a 120mm x 120mm bed. so you will be fine. Like I said, the legs are the biggest and I still had a little room on my 250mm bed when I did the thighs.

En réponse à - prasket a publié une note Hello All! Justin getting started on InMoov project! Already ran into power issue though with the finger-starter kit. I even tried to power with the power adapter that came with my […]

Mark Seaton a commenté une activité

Sun, 30 Dec 2018 16:32:54 +0200

Isn’t the Prusa 250mm bed?
The only parts that need a 250mm bed so far anyway are the legs. So you have a while to go.
And I have printed in PLA all the way, as long as you have your settings right that should be strong enough anyway.

Mark Seaton a commenté une activité

Fri, 28 Dec 2018 03:44:13 +0200

nice job. what are the specs on the nuc?
I have been searching for a tablet, but in Aus they are so expensive.

En réponse à - Andy Berlin a publié une note with intel nuc and own display works perfectly

Mark Seaton a commenté une activité

Tue, 30 Oct 2018 00:47:47 +0200

There are stl files available for both round and square. You need to print for which one you need, If the file is not on here then go to thingiverse and search for inmoov you will find it all.

En réponse à - Roger a publié une note Hey Friends! Another little Problem… When I extract the potentiometers from the HS-805bb servos, they are all square. However, there are components designed for round potentiometers. Are […]

Mark Seaton a commenté une activité

Fri, 07 Sep 2018 00:26:57 +0200

yep. got an email just recently and was about to report it here, but you beat me to it.

En réponse à - Wilco Van Toorn a publié une note So again, If you get an email from inmoov.fr/members/maryjose/ please be aware it is FAKE and a SCAM!!!Cannot state it enough. Delete the message, block the user and report it […]

Mark Seaton a commenté une activité

Mon, 03 Sep 2018 00:36:52 +0200

Double check you have the correct version of java for your pc, also did you create mrl folder on root C: ?
when you first start mrl did it pop up with screen and show it is starting?

En réponse à - Roger a publié une note I’m about to quit! MRL is not running on my PC. No instalation works. I’ve already tried so much, but nothing helped. I have the latest version of MRL, the latest version of java, original […]

Mark Seaton a commenté une activité

Sat, 26 May 2018 00:50:27 +0200

My first screw parts were an extremely tight fit. I put it in a vice and used a wrench to wind it in and out, eventually it got better. After that I printed everything with .15 layers and all is so much better. No problem with any of the pieces fitting since.

En réponse à - Mike Mossey a publié une note I have been printing out the neck parts but the Piston parts are not fitting together. I have tried several different brand of filament (PLA) and different layers 0.2 and 0.3mm. The […]

Mark Seaton a publié une note: I have been slowly getting ARLI together. I agree with a […]

Sun, 13 May 2018 02:47:11 +0200

I have been slowly getting ARLI together. I agree with a lot of others, the arm/hand is one of the more time consuming tasks. I have been slowed by delays in getting servos and electronics, but on the up side I have most of the parts printed for the main body and arms.
Since the legs are available, I have decided it is time to work on a pole…En afficher davantage

Mark Seaton a commenté une activité

Mon, 26 Mar 2018 03:39:32 +0200

Is he a surgeon? Why has he got gloves on?

En réponse à - marco a publié une note

Mark Seaton a publié une note: Most of the front and back framework is assembled. Now I […]

Wed, 21 Mar 2018 04:16:05 +0200

Most of the front and back framework is assembled. Now I will be concentrating on the arms, which I have printed, while printing the aesthetics.

Mark Seaton a publié une note: First servo tests. I have a little more work to do, but it […]

Wed, 21 Mar 2018 04:14:21 +0200

First servo tests. I have a little more work to do, but it is getting there!

Mark Seaton a publié une note: Just a quick throw together while waiting for the camera. […]

Sun, 11 Feb 2018 01:21:52 +0200

Just a quick throw together while waiting for the camera. What size screws do you use to screw the eyes to the mounts? They seem very small but long.

Mark Seaton a publié une note: Hi, I started this project recently and have been ordering […]

Sun, 11 Feb 2018 01:19:14 +0200

Hi, I started this project recently and have been ordering parts as I go. I have ordered a camera for the eyes, but only 1 was available. You say it has 2 cameras, but only 1 works in windows. My question is, do you require 2 cameras for tracking or any function at this stage? or is 1 OK?
Thankyou in advance, and thankyou for this wonderful…En afficher davantage

Mark Seaton a publié une note: I only discovered this project by chance in December. I saw […]

Sun, 04 Feb 2018 15:22:31 +0200

I only discovered this project by chance in December. I saw someone post a link and I watched some videos and was hooked. At first I thought I may just make the hand as a bit of fun. But after ordering the servos and arduino boards I had a bit of a wait for them to arrive, so started printing pieces. As I didn’t have any white filament, I printed…En afficher davantage