InMoov | John Hughes | Activité https://inmoov.fr/members/templar66/activity/ Activités de John Hughes Fri, 24 Apr 2026 08:56:28 +0200 https://buddypress.org/?v=10.6.0 fr-FR 30 hourly 2 81e317a1273aea7a7e50177defd92441 John Hughes a publié une note: Hi I have got as far as printing everything in the torso […] https://inmoov.fr/activity/p/21765/ Sun, 04 Feb 2018 11:30:27 +0200 Hi

I have got as far as printing everything in the torso section as seen in the pictures. I had wanted to have this standing on my desk with the head attached but it is obviously going to be top heavy. Would I need to basically continue to the Mid Stomach which seems to have a flat base to create something that would support the head and torso,…En afficher davantage

]]> 0 6d52f01168d28ddfce60ef064b1fc7d8 John Hughes a publié une note: Hi I am doing the main chest area at the moment and I am […] https://inmoov.fr/activity/p/21705/ Wed, 31 Jan 2018 08:55:36 +0200 Hi

I am doing the main chest area at the moment and I am printing the supports around the Kinect. Have printed the two InterKinectMidV1s for the center. I have printed two InterKinectSideV1’s. Is that all I need to print of them, or are there four needed. Its hard to tell from the assembly pictures. It looks like just two are needed one on each…En afficher davantage

]]> 0 b8417b45bc6bafb630918b753c2b55ee John Hughes a publié une note: Hi. This is how far I have got my project. I have the head […] https://inmoov.fr/activity/p/21370/ Tue, 09 Jan 2018 11:11:38 +0200 Hi. This is how far I have got my project. I have the head upright on the basic shoulder parts. I have my servos on order so I will be doing some work on wiring it up soon. The Shoulder area is not totally stable and I was wondering what extra parts add on the bottom to give it some stablity until I am ready to move on. Can any one direct me to…En afficher davantage

]]> 1 b9805230394d4383a5901d805c0f49ee John Hughes a publié une note: Hi. Just wondering where the Speakermouthholder is meant to […] https://inmoov.fr/activity/p/21357/ Mon, 08 Jan 2018 09:54:23 +0200 Hi. Just wondering where the Speakermouthholder is meant to go in the head section. I seem to see reference for everything else except that. Kind Regards Ian

]]> 0 4a48acd6af7b13ef52cb7fd27106a923 John Hughes a publié une note: Hi. Just a question. Now I am printing the correct parts, […] https://inmoov.fr/activity/p/21033/ Sat, 23 Dec 2017 11:31:49 +0200 Hi. Just a question. Now I am printing the correct parts, things are alot better. Although I have stuck one problem. The Jaw wont acclude totally, is that normal? Here is the face at the moment and as you can see. what seems to be the problem is the position of the Under Ear plate connector hitting the Jaw rear block. Any thoughts? Kind Regards…En afficher davantage

]]> 0 a2fdd4f9a4fe3a857ca16f9e312df039 John Hughes a publié une note: Hi. I needed to trim the Face Holders to allow the Ear Sides […] https://inmoov.fr/activity/p/20964/ Tue, 19 Dec 2017 10:56:29 +0200 Hi. I needed to trim the Face Holders to allow the Ear Sides to sit on correctly. Has anyone done a mod of these to make more room, or is there a good way to edit the stls for these?
]]> 1 2db319f655ff805b14dc392cf8027a03 John Hughes a publié une note: Mindless, I appreciate your comments. I am up to the task. I […] https://inmoov.fr/activity/p/20939/ Mon, 18 Dec 2017 13:08:42 +0200 Mindless, I appreciate your comments. I am up to the task. I have built a life size R2D2, Dalek, B9 Lost in Space Robot, done the electronics. But I always seem to take one step forward and ten back. So I will get there. 🙂

]]> 1 8d29ff10bf98580610063906addb8821 John Hughes a publié une note: Hi. So I am starting to reprint my inmoov from scratch. I […] https://inmoov.fr/activity/p/20928/ Mon, 18 Dec 2017 04:09:41 +0200 Hi. So I am starting to reprint my inmoov from scratch. I started with some cheap filament that came on 250g rolls, but now I am buying 1kg rolls but its whiter and I want a uniform print. But, if I decided to spray the parts like I see some people have done, what do people use. I assume I would need to sand the surface. What Grits would you use…En afficher davantage

]]> 2 2945af15ac975ce2176a6525157fc5ea John Hughes a commenté une activité https://inmoov.fr/activity/p/20910/#acomment-20919 Sun, 17 Dec 2017 23:45:16 +0200 Hi. I can understand the difficulty of maintaining files. I have been involved in R2D2 Hobby building and designing and providing open source files. Keeping revisions up to date is a real work in itself. I will definitely only follow the Gallery from this point. Definitely a good idea to remove the zip files.

Great work though.

Just out of…En afficher davantage

En réponse à - John Hughes a publié une note Hi. Just had a frustrating day, printing the Lower back of the head to only realize the stl I downloaded a month or so ago was out of date. The one I printed was in two parts and […] ]]> 57ab534f7595075d7244381c10f3677a John Hughes a publié une note: Hi. Just had a frustrating day, printing the Lower back of […] https://inmoov.fr/activity/p/20910/ Sun, 17 Dec 2017 10:04:44 +0200 Hi. Just had a frustrating day, printing the Lower back of the head to only realize the stl I downloaded a month or so ago was out of date. The one I printed was in two parts and minus joining lugs to connect to the rest of the head. What I find frustrating with the download section is that updates to the parts are occuring and the earlier…En afficher davantage

]]> 3 4d86f9c17461b8ab5ad36b9db8343792 John Hughes a publié une note: Hi I want to print a basic support for the head and neck but […] https://inmoov.fr/activity/p/20880/ Fri, 15 Dec 2017 10:43:59 +0200 Hi I want to print a basic support for the head and neck but rather than print a platform I would rather print the shoulder section. I am having trouble identifying the parts to print. Could anyone one define which parts will make the basic shoulder section, pictured here.

I can only find a ClavBackV2 and ClavFrontV2 in the Shoulder Files, but I…En afficher davantage

]]> 1 bd19a0f675f75bbb865289af9c35bfe6 John Hughes a publié une note: Hi Thanks for the Servo advice. That's on my shopping list. […] https://inmoov.fr/activity/p/20796/ Mon, 11 Dec 2017 10:59:42 +0200 Hi Thanks for the Servo advice. That’s on my shopping list. I have printed these parts off so far and I am just waiting on bolts to arrive to start putting things together. I also have all the eye parts done. I should start an album. But I just printed off the Throat Holder. I don’t know where it fits. The video I have of the Head and neck only…En afficher davantage

]]> 1 0e2f6f13ab8d2ef56b68581157aa695f John Hughes a publié une note: Hi what is the recommended main servo for the head. I am […] https://inmoov.fr/activity/p/20784/ Sun, 10 Dec 2017 06:51:58 +0200 Hi what is the recommended main servo for the head. I am trying to work out the size to get so I can start fitting it together. Kind Regards Ian

]]> 2 a00a33e051f86e1aee9477cfee2b3abb John Hughes a commenté une activité https://inmoov.fr/activity/p/20702/#acomment-20710 Tue, 05 Dec 2017 00:18:50 +0200 Hi Yep the filing and sanding is making things alot neater. I don\’t know what the software is. Gael posted it with a response to how close the parts should fit. Kind Regards Ian

En réponse à - John Hughes a publié une note Hi What I had to do with the parts was file an area back near the lower two joining lugs on the Top Mouth part, to allow them to meet. The prints both join perfectly now, so I am […] ]]> 44f926be58726b8ed4ef7735d975b9f4 John Hughes a publié une note: Hi What I had to do with the parts was file an area back […] https://inmoov.fr/activity/p/20702/ Mon, 04 Dec 2017 22:15:43 +0200 Hi What I had to do with the parts was file an area back near the lower two joining lugs on the Top Mouth part, to allow them to meet. The prints both join perfectly now, so I am not sure why I had a problem. One Lug slots over the other face part now, but looks neat from the outside. Thanks for the clarification on how they are meant to meet. I…En afficher davantage

]]> 5 22f2da0817d1e3e400f1e56642bf09f5 John Hughes a publié une note: Hi I have just printed the SideHearv3 and when I try and […] https://inmoov.fr/activity/p/20652/ Sat, 02 Dec 2017 06:54:55 +0200 Hi I have just printed the SideHearv3 and when I try and align them with the TopMouthv3, they appear to not line up. Where the bolts are they seem to be spaced especially at the bottom connectors. Is this normal, or do I need to do some sanding and adjustment to get these lined up. The print seem to work well and had plenty of…En afficher davantage

]]> 1 cff66222fcaa71bfe21521f9cb7dc6d3 John Hughes a publié une note: Hi So I am slowly progressing with the 3d printing of the […] https://inmoov.fr/activity/p/20612/ Fri, 01 Dec 2017 09:20:19 +0200 Hi So I am slowly progressing with the 3d printing of the head parts, and I can see that there is a tutorial for putting the eye mech together and for mounting the jaw. Are there other pictorial tutorials on how to build the whole head up? Kind Regards Ian

]]> 2 33588119aaa5257a827263078d8b1e6e John Hughes a publié une note: Hi. As I print the head I want to be able to add the […] https://inmoov.fr/activity/p/20551/ Mon, 27 Nov 2017 22:24:02 +0200 Hi. As I print the head I want to be able to add the electronics in as I go, rather than build the whole lot and add them in later. For the Eye mechanism I noticed that I need three Servos. The ones recommended seem to be close to $60 or more dollars each. Is there a more affordable but safe alternative for the servos, and would anyone have a link…En afficher davantage

]]> 4 57df9f8ee4fb3a0498ce6a31483eb47c John Hughes a publié une note: Hi I reprinted the Upper Mouth. Actually happy to have done […] https://inmoov.fr/activity/p/20537/ Mon, 27 Nov 2017 12:39:14 +0200 Hi I reprinted the Upper Mouth. Actually happy to have done it. I also downloaded the updated Ear frame part to match. Here are some pics of where I am at. Kind Regards Ian
]]> 0 c6389fbb5abd75fdb69dbd7586200dd9 John Hughes a commenté une activité https://inmoov.fr/activity/p/20521/#acomment-20529 Mon, 27 Nov 2017 00:56:16 +0200 Hi
Thanks for that. I will have a look at printing the part one piece. I appreciate your continued patience. Kind Regards Ian

En réponse à - John Hughes a publié une note Hi. In regards to the Upper Mouth parts. I have the two part arrangement. I these meant to be joined together via acetone or are they held together by other means. I am using pla and […] ]]> da5967634e0bb9ba6557a5e37c9e9716 John Hughes a publié une note: Hi. In regards to the Upper Mouth parts. I have the two part […] https://inmoov.fr/activity/p/20521/ Sun, 26 Nov 2017 08:44:44 +0200 Hi. In regards to the Upper Mouth parts. I have the two part arrangement. I these meant to be joined together via acetone or are they held together by other means. I am using pla and I was told I could use acetone to join them. If they are to be glued, could you advise me whether that is the case and by what means. Kind Regards Ian
]]> 3 468402ce03ffff9935fdb48b06eb79be John Hughes a commenté une activité https://inmoov.fr/activity/p/20453/#acomment-20466 Thu, 23 Nov 2017 12:07:09 +0200 Hi I just dug out my xbox kinect and thought as a side project I would start looking at setting it up. I assume I would need to start with the nervo board? and work from there. Can I purchase a pre made board? Kind Regards Ian

En réponse à - John Hughes a publié une note Hi I am obviously having trouble negotiating around the site. I can find printing the parts but I am having trouble finding tutorials or step by steps on building the parts. I want […] ]]> ec73d7c2a9311f6bcba87d472c85759e John Hughes a commenté une activité https://inmoov.fr/activity/p/20453/#acomment-20462 Wed, 22 Nov 2017 22:31:36 +0200 Hi
Thank you for that. All found now and its a bit clearer what I need to do. I will have links in my favorites bar to these now so I will be able to move along ok. Thanks for your patience. Kind Regards Ian

En réponse à - John Hughes a publié une note Hi I am obviously having trouble negotiating around the site. I can find printing the parts but I am having trouble finding tutorials or step by steps on building the parts. I want […] ]]> 7491e6f8fdff9d52e3dc163db9fe3b03 John Hughes a publié une note: Hi I am obviously having trouble negotiating around the […] https://inmoov.fr/activity/p/20453/ Wed, 22 Nov 2017 11:33:50 +0200 Hi I am obviously having trouble negotiating around the site. I can find printing the parts but I am having trouble finding tutorials or step by steps on building the parts. I want to get the black screws to connect the eye piece to the upper mouth. What type of screws do I need and where would there be a step by step guide to construction be?

I…En afficher davantage

]]> 6 a57dd83e661ba1ed5531a24a25cf0e62 John Hughes a commenté une activité https://inmoov.fr/activity/p/20433/#acomment-20441 Wed, 22 Nov 2017 07:09:26 +0200 Hi Could you send me a link to the post you referenced. I assume considering I just did a 6 hour print on the top mouth there should be some way of still using it?

Kind Regards

Ian

En réponse à - John Hughes a publié une note Hi. I printed the eye plate as per instructions and without support material and it came out perfectly. The next parts I printed was the Upper mouth pieces that join to the bottom of […] ]]> d47d3cdbf2c4cca7803de2521f4a7560 John Hughes a commenté une activité https://inmoov.fr/activity/p/20433/#acomment-20437 Wed, 22 Nov 2017 01:50:59 +0200 Hi. Thanks for that, it is support structure that I can remove. That\’s good. One thing though is I notice that the Top Mouth is now version 3. I printed the earlier version I downloaded a few weeks ago. Can I still use this, or do I have to do a reprint? Kind Regards Ian

En réponse à - John Hughes a publié une note Hi. I printed the eye plate as per instructions and without support material and it came out perfectly. The next parts I printed was the Upper mouth pieces that join to the bottom of […] ]]> fb7070eeb9140209c92139b6f6eee4e9 John Hughes a publié une note: Hi. I printed the eye plate as per instructions and without […] https://inmoov.fr/activity/p/20433/ Tue, 21 Nov 2017 22:19:22 +0200 Hi. I printed the eye plate as per instructions and without support material and it came out perfectly. The next parts I printed was the Upper mouth pieces that join to the bottom of the eye part. They have what I believe are support material under the nose and similar to rear sides. I am not sure if I am meant to remove the rear ones as I don’t…En afficher davantage

]]> 5 8c0f5205eaa81a0958fd7e7e59564247 John Hughes a commenté une activité https://inmoov.fr/activity/p/20197/#acomment-20200 Sat, 11 Nov 2017 09:18:15 +0200 Hi

I thought I did read somewhere once that alot of the parts for the inmoov shouldn\’t need support material. I will have to give a go and see how it turns out. How far have you got?

Kind Regards

Ian

En réponse à - John Hughes a publié une note Hi I am about to start on this big project and I want to start with the head down like alot of the builds here. I want to print the eye section first. As I am new to 3d printing, […] ]]> 82698a70039b6554d8ba57facf8f3421 John Hughes a publié une note: Hi I am about to start on this big project and I want to […] https://inmoov.fr/activity/p/20197/ Sat, 11 Nov 2017 06:20:35 +0200 Hi

I am about to start on this big project and I want to start with the head down like alot of the builds here. I want to print the eye section first. As I am new to 3d printing, would I need to use support material for the eye piece? If someone can direct me on what you did I can get started and post my progress.

Kind Regards

John

]]> 3