InMoov | Mindless | Activités des amis https://inmoov.fr/members/mindless/activity/friends/ Activités des contacts de Mindless Tue, 21 Apr 2026 23:17:26 +0200 https://buddypress.org/?v=10.6.0 fr-FR 30 hourly 2 6e49738a01d0cb4ca01d25e0d6577874 Perry a commenté une activité https://inmoov.fr/activity/p/34717/#acomment-34730 Sat, 15 May 2021 02:39:13 +0200 Fred is going great and you have really helped a lot understand how to assemble an inmoov. It also shows, one should feel completely comfortable modding it. This child needs to mutate and change over generations to survive.

En réponse à - Ray Edgley a publié une note Seems I keep getting questions on Fred’s Power Systems. Lets try and explain it a bit better 🙂 https://youtu.be/Hs3IV-DHE6M ]]> d357c581a94afd3818db0bd54e62be0e Perry a commenté une activité https://inmoov.fr/activity/p/34511/#acomment-34729 Sat, 15 May 2021 02:35:43 +0200 You always have interesting combinations, good job!

En réponse à - lecagnois a publié une note Un Système Pan Tilt pour le mini InMoov de 40 cm https://inmoov.monsite-orange.fr/page-60702d0a67f94.html ]]> 8ec01d81f002cd44daefbfab5f198dca Perry a commenté une activité https://inmoov.fr/activity/p/34582/#acomment-34728 Sat, 15 May 2021 02:35:09 +0200 Get and Ender 3, hands down

En réponse à - Justin Joseph a publié une note Hey Guys, could someone please recommend a good p3d printer to use to start printing my parts? Thank you so much. ]]> 738d55a7a5855b3667f6052768f50fdb Perry a commenté une activité https://inmoov.fr/activity/p/34596/#acomment-34727 Sat, 15 May 2021 02:34:28 +0200 They are standard sized servos from Amazon,I will check the type.

En réponse à - Perry a publié une note My minim move roamer https://www.youtube.com/watch?v=5DHi1r43SkU&t=5s ]]> 163ef729415f0134dc6e5f566d3e3cd9 Perry a publié une note: My minim move […] https://inmoov.fr/activity/p/34596/ Sat, 01 May 2021 04:10:53 +0200 My minim move roamer

]]> 3 92a5a64120e36cd1794ad5489f486a36 Perry a commenté une activité https://inmoov.fr/activity/p/34132/#acomment-34171 Wed, 10 Mar 2021 14:57:52 +0200 I will need to upload them to Thingiverse or something like that. Since I changed the worm gear you don’t need all the clearance around the old servo horn area which allowed me to reinforce that area substantially. I used the bearing sizes that you recommended in your post

En réponse à - Perry a publié une note Reinforced shoulder gearbox with Resin printed gears ]]> 5507929543068c15acbc525e5250e2c0 Perry a publié une note: Reinforced shoulder gearbox with Resin printed gears https://inmoov.fr/activity/p/34132/ Thu, 04 Mar 2021 23:50:03 +0200 Reinforced shoulder gearbox with Resin printed gears
]]> 3 e95e827cbf1538f860ed879edaafb477 Marten de Groot a commenté une activité https://inmoov.fr/activity/p/31625/#acomment-32291 Mon, 29 Jun 2020 14:31:25 +0200 Nice video @ozzytrooper 🙂

And single headers you can break them easy by hand.
Double or more rows, you will need some tools to cut them.
For the 14-pin flat-cable connector, I’m using a small vice.
Most people will have this or something look like this.

En réponse à - Mat Prentis a publié une note If I may share two video tutorial that I recently made. The first is electrical and electronics using Nervo boards it also covers how to us the 6V supply to power the Kinect. Second […] ]]> f7f85cb2937506acd453a2434e00cfdb Perry a commenté une activité https://inmoov.fr/activity/p/31180/#acomment-31199 Sat, 07 Mar 2020 06:25:34 +0200 Great job Ray. The print look outstanding.

En réponse à - Ray Edgley a publié une note Since the last video generated some interest in my build of the InMoov robot (Fred) I thought I would pull off one of his arms and give you a look inside. https://youtu.be/dyYEcoGKfq0 ]]> b908b5ce0e31d62f7d4827e9f2a09b02 Marten de Groot a commenté une activité https://inmoov.fr/activity/p/29036/#acomment-29039 Sun, 04 Aug 2019 21:17:37 +0200 Hello Steve,

There is a difference between PMW which is used to control a dc motor speed (H-bridge), or a PWM used for servo’s.

The PWM for controlling the speed for a dc motor, or intensity for a LED, is at some pins hardware-based (internal circuit/timer, to sending a PWM with a fixt frequency in the background.)
These pins are the pins where…En afficher davantage

En réponse à - Steve Rayner a publié une note The hardware map indicates we use Arduino pins 22, 24, 27, 28 & 29. However these do not appear to me PWM pins on the Arduino Mega. How does this work? ]]> 90cdbaf9f39b1673d91378cfa8e0a3db amby a commenté une activité https://inmoov.fr/activity/p/26073/#acomment-26405 Mon, 18 Feb 2019 10:06:32 +0200 hello ho thank you i just see your message thank

En réponse à - Valentin a publié une note ]]> 75f4022edbf8ba09749db417094e6742 amby a commenté une activité https://inmoov.fr/activity/p/26073/#acomment-26107 Sun, 27 Jan 2019 19:51:38 +0200 hello valentin did you put stl files on thingiverse about your eyelid? thank you
because il looking for

En réponse à - Valentin a publié une note ]]> 5f56748e7f655eae9710df39adda4d28 Perry a commenté une activité https://inmoov.fr/activity/p/24388/#acomment-24390 Thu, 13 Sep 2018 14:23:13 +0200 I recall having the same problem when I tried to use the micro. Something about the USB not being a true USB. Don\’t quote me here. I moved on to Adafruit Pro Trinkets.
https://www.adafruit.com/product/2000
those work for me.

En réponse à - Isabel a publié une note Currently finalising the hardware for my robot Jinn! Has anyone been able to use an Arduino Pro Micro fro the neopixel ring? It works perfectly when run through Arduino but I’m unable […] ]]> c2a18d5583f7a8b6c8fce96ecf7a3af5 Marten de Groot a commenté une activité https://inmoov.fr/activity/p/24308/#acomment-24311 Thu, 06 Sep 2018 17:38:25 +0200 Here the same from: http://inmoov.fr/members/maryjose/
Don\’t sent a email! otherwise they have your email address for more scam/spam!

En réponse à - Wilco Van Toorn a publié une note Just to give a heads up to the community, today i recieved an email from marie-josephine, and it was a money scam. with a sad story about cancer and how i could get money. Please […] ]]> 4eb845493715b006028531d55524b660 Marten de Groot a commenté une activité https://inmoov.fr/activity/p/24297/#acomment-24310 Thu, 06 Sep 2018 17:32:55 +0200 They are always available, you can order them in Back-Order.
Gaël isn\’t always at home because of many events 🙂

Just please your order and Gaël will sent them when he\’s back.

En réponse à - Tim Parkinson a publié une note Hey guys when should the nervo board kits be availiable again. ]]> 10cd9317d67408a5ebf4c814c11e71a4 Marten de Groot a commenté une activité https://inmoov.fr/activity/p/23974/#acomment-24005 Sun, 05 Aug 2018 22:27:38 +0200 Thanks Rick!
All input is welcome 🙂

I hope soon to add some more info.

En réponse à - Marten de Groot a publié une note Here my new FingerStarter kit with Hall-sensor option: ]]> ab985e31235867b472707b96ad8263fd Marten de Groot a publié une note: Here my new FingerStarter kit with Hall-sensor option: https://inmoov.fr/activity/p/23974/ Thu, 02 Aug 2018 20:57:20 +0200 Here my new FingerStarter kit with Hall-sensor option:

FingerStarterKit with HallSensor option by MdG_NL – Thingiverse
https://www.thingiverse.com/thing:2994206
This FingerStarterKit is including a Hall-Sensor option, which can detect a « touch » from the finger.
When the finger touch something, the servo starts…

En afficher davantage

]]> 2 915d77cb9341a58b60140b128d1f1125 Perry a publié une note: https://inmoov.fr/activity/p/23037/ Sun, 06 May 2018 18:54:44 +0200




]]> 0 c3c14306567dc87cc2918fb644774eab Perry a commenté une activité https://inmoov.fr/activity/p/22780/#acomment-22837 Mon, 16 Apr 2018 19:07:30 +0200 Interesting. Curious if those stepper motors have the torque needed. Also they are quite heavy. Does it make sense to use them?

En réponse à - Dr Jim Gillies a publié une note Some pictures of my modifications. ]]> 223c1a414892c5891c34adc43f6fc32f Perry a commenté une activité https://inmoov.fr/activity/p/22197/#acomment-22228 Fri, 02 Mar 2018 00:35:00 +0200 What is YOLO and what does it do? Your face tracking is very good.

En réponse à - Dominique a publié une note This Face tracking and yolo process in the same time. Two camera, one for tracking, one for yolo. ]]> 0d2c28d0523c5bafbec4e82ea5b0e4e6 Perry a publié une note: https://inmoov.fr/activity/p/22079/ Fri, 23 Feb 2018 18:31:07 +0200

]]> 1 02cbb0c0e3dd1566819ade0b782da72d Perry a commenté une activité https://inmoov.fr/activity/p/22015/#acomment-22026 Tue, 20 Feb 2018 20:25:33 +0200 Thanks for posting this mindless. I have watched it 3 times so far and can\’t get enough. If you go to their website check out their \’singer\’

En réponse à - Mindless a publié une note Hay Guys,,, Not sure how many of ya have seen this,,,, but this Dude is my kind of Robotic Engineer and deserves A+++ https://www.youtube.com/watch?v=3RBSkq-_St8 ]]> c9ecdebc87055aa7df0c585abf04041b Perry a commenté une activité https://inmoov.fr/activity/p/21978/#acomment-22010 Mon, 19 Feb 2018 20:45:53 +0200 Nice looking prints. Where in Brazil are you?

En réponse à - joao luiz morales a publié une note first head test I’m from Brazil. ]]> 215ce7fc78a46e1f58124132eb412bd9 Acapulco Rolf a commenté une activité https://inmoov.fr/activity/p/21946/#acomment-21982 Sat, 17 Feb 2018 21:30:53 +0200 Hi James, you can find a step by step guide for these servos here : https://groups.google.com/d/msg/inmoov/FW3tZmAdfBs/mViAr9aXAwAJ

En réponse à - James Kruse a publié une note 8 20kg servos ordered- JX PDI-6221MG 20KG Aluminium Metal Gear; hoping they fit ]]> 5fce578338c8dea369486b4b6fec8061 Perry a commenté une activité https://inmoov.fr/activity/p/21894/#acomment-21895 Tue, 13 Feb 2018 05:39:40 +0200 I like the color scheme.

En réponse à - Clivem a publié une note My build is continuing. I have completed the hand/forearm and have ordered the servos. Printing overnight every night now to have the parts ready for the servos when they arrive. Having […] ]]> 43afa5baafb9627667c9ebfbebb4bc1d Perry a publié une note: Designing a new head layout. Moving the mounting of the eyes […] https://inmoov.fr/activity/p/21748/ Sat, 03 Feb 2018 00:30:44 +0200 Designing a new head layout. Moving the mounting of the eyes to the head as opposed to the face.
]]> 0 16b14f9c510bb81b741e5161a4399f3f Perry a commenté une activité https://inmoov.fr/activity/p/21704/#acomment-21717 Wed, 31 Jan 2018 21:52:09 +0200 Always fun when the first parts start coming out of the printer.

En réponse à - Arthur a publié une note Just started with building inMoov, first photo.. ]]> e2de088ac615a08f5678065c165428de Julian a publié une note: Just wanted to give a update to my build: I haven't started […] https://inmoov.fr/activity/p/21677/ Mon, 29 Jan 2018 16:59:35 +0200 Just wanted to give a update to my build: I haven\’t started building yet. I\’m just planning right now (boring stuff :D). I came to the conclusion, that I want to make my own PCB specifically for this robot just to fit it my needs better! I hope, that I can share more information soon!

]]> 0 33545e4b94ef077ab32abd318ea7d021 Perry a commenté une activité https://inmoov.fr/activity/p/21645/#acomment-21648 Fri, 26 Jan 2018 21:16:39 +0200 Nice prints

En réponse à - Vandamme a publié une note ]]> 74474de2071276cc4696d769e973741c amby a commenté une activité https://inmoov.fr/activity/p/20093/#acomment-21425 Fri, 12 Jan 2018 11:40:03 +0200 nice work i do the same neck which servo did you use? i use mr996 is not enought strong

En réponse à - Mike Lab a publié une note Slowly making progress… ]]> 03c98f574950356a9eee4768812f2b5f amby a commenté une activité https://inmoov.fr/activity/p/20678/#acomment-21414 Thu, 11 Jan 2018 20:19:38 +0200 very nice

En réponse à - Ivan FdC a publié une note ]]> 7076bd95da6dceaf834133ed6d4dc82a Perry a commenté une activité https://inmoov.fr/activity/p/21138/#acomment-21158 Sun, 31 Dec 2017 22:21:44 +0200 My bots arms do not extend all the way as well. I printed everything stock.

En réponse à - Mindless a publié une note Like this Damian,,, ]]> 773ec9be66da19a6ee66810047883b2d Acapulco Rolf a commenté une activité https://inmoov.fr/activity/p/21110/#acomment-21114 Fri, 29 Dec 2017 12:18:37 +0200 nice work, that should save some $$$ on new servos 🙂

En réponse à - Mindless a publié une note This is a“Free Spinning “ Version of the Savox Servo SV 0236MG https://www.thingiverse.com/thing:2736500 ]]> bfefb067a4516059a790e030b73bb834 Acapulco Rolf a publié une note: Top legs twist […] https://inmoov.fr/activity/p/21067/ Wed, 27 Dec 2017 16:10:30 +0200 Top legs twist testing
https://www.thingiverse.com/thing:2316843
myrobotlab.org

]]> 1 1a9f20c5feeec64cb3a8405e0769b24b Acapulco Rolf a commenté une activité https://inmoov.fr/activity/p/21054/#acomment-21059 Tue, 26 Dec 2017 22:41:02 +0200 Nice prints you have there 🙂
Which brand of filament are you using?

En réponse à - Mindless a publié une note ]]> f45c54a089ca31c4e19817cd2796a097 Perry a commenté une activité https://inmoov.fr/activity/p/20882/#acomment-20946 Mon, 18 Dec 2017 23:36:45 +0200 I didn\’t realize you had a tutorial page up for that. You\’re site is coming along nicely.

En réponse à - Acapulco Rolf a publié une note Neopixel ring disk on the printer… http://inmoov.fr/inmoov-stl-parts-viewer/?bodyparts=Top-Stomach […] ]]> 17f72658cb513e66ca9e5fa9ba77d0ff Perry a commenté une activité https://inmoov.fr/activity/p/20853/#acomment-20896 Fri, 15 Dec 2017 21:32:59 +0200 Darn, I must have printed the early versions. I\’m all glued up too. One of the pains of being one of the first printers. Oh well, mine seem to align a bit better and since I have a color transition it is not noticeable.

En réponse à - Mindless a publié une note Hay Guys Mr Gael,,, just wondering about these X2 Nut/Bolt Holes when they line up the “Front Skin” is sticks out by 3.8mm — ,, is this meant to be like this ? –,, ]]> bbee485a430405e3343b2ce30f57e8a4 Perry a commenté une activité https://inmoov.fr/activity/p/20882/#acomment-20895 Fri, 15 Dec 2017 21:29:29 +0200 That is one of the better parts to print all in one.

En réponse à - Acapulco Rolf a publié une note Neopixel ring disk on the printer… http://inmoov.fr/inmoov-stl-parts-viewer/?bodyparts=Top-Stomach […] ]]> c41cd8d9da163109204b43e5bed30eee Acapulco Rolf a commenté une activité https://inmoov.fr/activity/p/20880/#acomment-20883 Fri, 15 Dec 2017 11:36:53 +0200 Hi John
Take a look at the assembly sketches here:

Assembly Sketchs

Look at the sketches in the torso and shoulder sections for a steer

En réponse à - John Hughes a publié une note Hi I want to print a basic support for the head and neck but rather than print a platform I would rather print the shoulder section. I am having trouble identifying the parts to […] ]]> 50dcb3bf41a799f01989e14cd95330d5 Acapulco Rolf a publié une note: Neopixel ring disk on the […] https://inmoov.fr/activity/p/20882/ Fri, 15 Dec 2017 11:31:06 +0200 Neopixel ring disk on the printer…

InMoov body parts library :


https://www.thingiverse.com/thing:2702688
https://www.thingiverse.com/thing:2703031

Thanks Gael
Thanks Bryan for sharing the remix
]]> 5 3f696b7f46c329c99cd4afca707a80ed Acapulco Rolf a commenté une activité https://inmoov.fr/activity/p/20879/#acomment-20881 Fri, 15 Dec 2017 11:26:49 +0200 Ahoy Mindless!
Most excellent work

Thank you 🙂

En réponse à - Mindless a publié une note Here ya go Acapulco Rolf should be all good,,, https://www.thingiverse.com/thing:2716298 ]]>