InMoov | Perry | Activité

Perry a commenté une activité

Sat, 15 May 2021 02:39:13 +0200

Fred is going great and you have really helped a lot understand how to assemble an inmoov. It also shows, one should feel completely comfortable modding it. This child needs to mutate and change over generations to survive.

En réponse à - Ray Edgley a publié une note Seems I keep getting questions on Fred’s Power Systems. Lets try and explain it a bit better 🙂 https://youtu.be/Hs3IV-DHE6M

Perry a commenté une activité

Sat, 15 May 2021 02:35:43 +0200

You always have interesting combinations, good job!

En réponse à - lecagnois a publié une note Un Système Pan Tilt pour le mini InMoov de 40 cm https://inmoov.monsite-orange.fr/page-60702d0a67f94.html

Perry a commenté une activité

Sat, 15 May 2021 02:35:09 +0200

Get and Ender 3, hands down

En réponse à - Justin Joseph a publié une note Hey Guys, could someone please recommend a good p3d printer to use to start printing my parts? Thank you so much.

Perry a commenté une activité

Sat, 15 May 2021 02:34:28 +0200

They are standard sized servos from Amazon,I will check the type.

En réponse à - Perry a publié une note My minim move roamer https://www.youtube.com/watch?v=5DHi1r43SkU&t=5s

Perry a publié une note: My minim move […]

Sat, 01 May 2021 04:10:53 +0200

My minim move roamer

Perry a commenté une activité

Wed, 10 Mar 2021 14:57:52 +0200

I will need to upload them to Thingiverse or something like that. Since I changed the worm gear you don’t need all the clearance around the old servo horn area which allowed me to reinforce that area substantially. I used the bearing sizes that you recommended in your post

En réponse à - Perry a publié une note Reinforced shoulder gearbox with Resin printed gears

Perry a publié une note: Reinforced shoulder gearbox with Resin printed gears

Thu, 04 Mar 2021 23:50:03 +0200

Reinforced shoulder gearbox with Resin printed gears

Perry a commenté une activité

Sat, 07 Mar 2020 06:25:34 +0200

Great job Ray. The print look outstanding.

En réponse à - Ray Edgley a publié une note Since the last video generated some interest in my build of the InMoov robot (Fred) I thought I would pull off one of his arms and give you a look inside. https://youtu.be/dyYEcoGKfq0

Perry a commenté une activité

Thu, 13 Sep 2018 14:23:13 +0200

I recall having the same problem when I tried to use the micro. Something about the USB not being a true USB. Don\’t quote me here. I moved on to Adafruit Pro Trinkets.
https://www.adafruit.com/product/2000
those work for me.

En réponse à - Isabel a publié une note Currently finalising the hardware for my robot Jinn! Has anyone been able to use an Arduino Pro Micro fro the neopixel ring? It works perfectly when run through Arduino but I’m unable […]

Perry a publié une note:

Sun, 06 May 2018 18:54:44 +0200

Perry a commenté une activité

Mon, 16 Apr 2018 19:07:30 +0200

Interesting. Curious if those stepper motors have the torque needed. Also they are quite heavy. Does it make sense to use them?

En réponse à - Dr Jim Gillies a publié une note Some pictures of my modifications.

Perry a commenté une activité

Fri, 02 Mar 2018 00:35:00 +0200

What is YOLO and what does it do? Your face tracking is very good.

En réponse à - Dominique a publié une note This Face tracking and yolo process in the same time. Two camera, one for tracking, one for yolo.

Perry a publié une note:

Fri, 23 Feb 2018 18:31:07 +0200

Perry a commenté une activité

Tue, 20 Feb 2018 20:25:33 +0200

Thanks for posting this mindless. I have watched it 3 times so far and can\’t get enough. If you go to their website check out their \’singer\’

En réponse à - Mindless a publié une note Hay Guys,,, Not sure how many of ya have seen this,,,, but this Dude is my kind of Robotic Engineer and deserves A+++ https://www.youtube.com/watch?v=3RBSkq-_St8

Perry a commenté une activité

Mon, 19 Feb 2018 20:45:53 +0200

Nice looking prints. Where in Brazil are you?

En réponse à - joao luiz morales a publié une note first head test I’m from Brazil.

Perry a commenté une activité

Tue, 13 Feb 2018 05:39:40 +0200

I like the color scheme.

En réponse à - Clivem a publié une note My build is continuing. I have completed the hand/forearm and have ordered the servos. Printing overnight every night now to have the parts ready for the servos when they arrive. Having […]

Perry a publié une note: Designing a new head layout. Moving the mounting of the eyes […]

Sat, 03 Feb 2018 00:30:44 +0200

Designing a new head layout. Moving the mounting of the eyes to the head as opposed to the face.

Perry a commenté une activité

Wed, 31 Jan 2018 21:52:09 +0200

Always fun when the first parts start coming out of the printer.

En réponse à - Arthur a publié une note Just started with building inMoov, first photo..

Perry a commenté une activité

Fri, 26 Jan 2018 21:16:39 +0200

Nice prints

En réponse à - Vandamme a publié une note

Perry a commenté une activité

Sun, 31 Dec 2017 22:21:44 +0200

My bots arms do not extend all the way as well. I printed everything stock.

En réponse à - Mindless a publié une note Like this Damian,,,

Perry a commenté une activité

Mon, 18 Dec 2017 23:36:45 +0200

I didn\’t realize you had a tutorial page up for that. You\’re site is coming along nicely.

En réponse à - Acapulco Rolf a publié une note Neopixel ring disk on the printer… http://inmoov.fr/inmoov-stl-parts-viewer/?bodyparts=Top-Stomach […]

Perry a commenté une activité

Fri, 15 Dec 2017 21:32:59 +0200

Darn, I must have printed the early versions. I\’m all glued up too. One of the pains of being one of the first printers. Oh well, mine seem to align a bit better and since I have a color transition it is not noticeable.

En réponse à - Mindless a publié une note Hay Guys Mr Gael,,, just wondering about these X2 Nut/Bolt Holes when they line up the “Front Skin” is sticks out by 3.8mm — ,, is this meant to be like this ? –,,

Perry a commenté une activité

Fri, 15 Dec 2017 21:29:29 +0200

That is one of the better parts to print all in one.

En réponse à - Acapulco Rolf a publié une note Neopixel ring disk on the printer… http://inmoov.fr/inmoov-stl-parts-viewer/?bodyparts=Top-Stomach […]

Perry a publié une note: Let's rock this Mother F'er!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Sat, 02 Dec 2017 06:06:54 +0200

Let’s rock this Mother F’er!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Perry a commenté une activité

Sat, 02 Dec 2017 05:01:48 +0200

Gael\’s design is completely unique because it does not require metal. All I am saying is that I am not pure and this is one of the few areas that metal solves a few problems.

Cheers!

En réponse à - Mindless a publié une note

Perry a commenté une activité

Sat, 02 Dec 2017 04:56:20 +0200

I still contend that it would be good to keep them small to simulate a ball joint and add the required strength but adding the bolt, which is already necessary to mount the pistons. Build a lot of strenghte with a LOT of plastic or a little metal. This is one of the more heavily stressed joints on the bot
I am sure either would work fine.

En réponse à - Mindless a publié une note

Perry a commenté une activité

Sat, 02 Dec 2017 02:50:45 +0200

Mine actually made themselves two parts after a couple of days use. No CAD needed. I wanted to preserve the original geometry because it offers about the right range of travel. So I glued them back on and instead of a short bolt I thru-drilled the hole and placed a much longer bolt through it. The bolt passes through the neck and into the…En afficher davantage

En réponse à - Mindless a publié une note

Perry a commenté une activité

Tue, 28 Nov 2017 20:12:53 +0200

Yes. You guessed it. I am from Vermont in the US. Up here by Canada. All snow, no sun….The chicks are all covered in flannel.

En réponse à - Perry a publié une note @mindless Hi man. Just curious,. Where are your from? You have an awesome bot and a cool sense of humor

Perry a publié une note: @mindless Hi man. Just curious,. Where are your from? You […]

Sun, 26 Nov 2017 05:49:57 +0200

@mindless
Hi man. Just curious,. Where are your from?
You have an awesome bot and a cool sense of humor

Perry a commenté une activité

Sun, 26 Nov 2017 05:39:36 +0200

I traditionally were a heavy aluminum foil hat to protect my brain from solar flares and government helicopters. I peel off layers and wrap them around my fingers, That insulates them so there are no burns. Do they teach yo nothing in school over there?

En réponse à - Mindless a publié une note I don’t know guys,,,- a little bit of File work and trim that bit of the side and should be all good,,?

Perry a commenté une activité

Sun, 26 Nov 2017 05:23:26 +0200

Marcel you are young so I want to offer advice. Then I look at your build and I feel like I need to ask for advice. Keep it up bud.

En réponse à - Marcel Gevart a publié une note At work on our « Jarvis » with my son Jason. Great moment!

Perry a commenté une activité

Sun, 26 Nov 2017 05:20:52 +0200

Great quality prints. Nice to see your progress.

En réponse à - Marcel Gevart a publié une note Hand with sensor system almost done. Good night !

Perry a commenté une activité

Sun, 26 Nov 2017 05:19:38 +0200

I have good luck sculpting the perfect shape while it is still hot. Sometimes I melt a kg in a pan and hand mold a perfect part. In fact I sold my printer long ago.

En réponse à - Mindless a publié une note I don’t know guys,,,- a little bit of File work and trim that bit of the side and should be all good,,?

Perry a commenté une activité

Sat, 25 Nov 2017 06:39:54 +0200

Damn that is a good print. What are the dims?

En réponse à - Mindless a publié une note First chest plate with the rebate for the Bearings,,,,

Perry a commenté une activité

Sat, 25 Nov 2017 04:50:22 +0200

@mindless Actually there are fitment issues if you try to move the legs. Portions of the upper thigh hits the waist. Dremel fixed that all. No other big surprises. I didn\’t use the internal reinfordcements or threades rode.
It is obvious they are pretty much for display and they do not have the degrees of freedom needed to function. Still they are cool.

En réponse à - Perry a publié une note

Perry a publié une note:

Wed, 22 Nov 2017 22:41:49 +0200

Perry a commenté une activité

Tue, 21 Nov 2017 01:48:51 +0200

I printed one but it won\’t work. I can\’t figure out how to plug it in.

En réponse à - Mindless a publié une note Hay Guys,,, just uploaded a Mock up Savox Servo-0236MG which is basically the same as the HS-BB-805 you can check it out here – https://www.thingiverse.com/thing:2658263

Perry a commenté une activité

Wed, 15 Nov 2017 08:24:15 +0200

haha.
My wife approves

En réponse à - justo a publié une note Is just a test. How is going to look, but I missing the original files I adapted from an original Amazon warrior, but i can’t find it again. It look nice.

Perry a commenté une activité

Tue, 14 Nov 2017 23:29:38 +0200

Sweet.

En réponse à - Keukpa a publié une note LEGS!!! The Pole is too short to put his feet on, but I’ll buy a new one tomorrow 😀

Perry a commenté une activité

Tue, 14 Nov 2017 17:33:30 +0200

It\’s funny Gael. As you can see my guy is mounted on an office chair base. I am used to him being much closer to ground level. It will take some getting used to.
So now for the big question. Where is the butt? Does he have that section designed?

En réponse à - Perry a publié une note

Perry a publié une note:

Tue, 14 Nov 2017 06:51:16 +0200

Perry a commenté une activité

Sat, 28 Oct 2017 03:26:19 +0200

What mindless said is exactly right

En réponse à - cristian a publié une note Hello, I want to print stomach en pla, how much infill do you recommend? 100%? RollBackLeftV1.stl RollBackRightV1.stl RollFrontLeftV1.stl RollFrontRightV1.stl

Perry a commenté une activité

Sat, 21 Oct 2017 04:21:58 +0200

Agree. It is like an early Christmas

En réponse à - Mindless a publié une note Many Thanks Mr Gael for Releasing the Leg Files for all of us that like to Tinker and Tweak,,,

Perry a commenté une activité

Sat, 21 Oct 2017 04:21:35 +0200

What\’s that?
I like your style. Mostly CAD for now or are you printing parts?

En réponse à - Mindless a publié une note

Perry a publié une note: Looks like the leg files are up. Probably took Gael quite a […]

Sat, 21 Oct 2017 04:20:48 +0200

Looks like the leg files are up. Probably took Gael quite a few hours to make the thumbnails.
Printing already.

Perry a commenté une activité

Wed, 18 Oct 2017 20:58:54 +0200

Where can they be downloaded? I do not see them on your site?

En réponse à - Gael Langevin a publié une note Get your printers warmed UP!! The legs I had created a long time ago for InMoov are ready to download. These are the version for standing, not motorized. Beware that some parts […]

Perry a commenté une activité

Mon, 18 Sep 2017 04:42:54 +0200

who is Bartcam?

En réponse à - Acapulco Rolf a publié une note Leg printing. Making steady progress

Perry a commenté une activité

Tue, 12 Sep 2017 01:41:58 +0200

I had the same \’problem\’.
Solution, print some 3mm rods and use those. A 100mm rod will do a hand I think. Insert into the joint and trim. Or print them individually.

En réponse à - Timothy a publié une note Can someone suggest an alternative to the 3mm filament for the pins on the hand? My filament is 1.75mm and hate to buy a roll of 3 mm just for this. Thanks!

Perry a commenté une activité

Tue, 05 Sep 2017 22:01:48 +0200

I have the flux capacitor mounted behind it.

En réponse à - Perry a publié une note

Perry a publié une note:

Fri, 01 Sep 2017 23:12:11 +0200