I love a good workshop tour! Thanks for sharing 🙂

I’m very envious of all that space!

Wow great space and workshop!!
You are going to raise an army of robots and drones in there.
🙂
Thanks for your vlog.

Gee Markus, we are going to lose you in virtuality.

Good Job.

congratulations, I wish it had English subtitles so I could understand it though.

Congratulations! That’s awesome. I know it will be a long time but be sure to post videos when you are allowed to.

That’s really cool, keep the Vlogs coming!

Great Markus!
This is a very nice initiative!
More explanations and focus on how we could reproduce what you did would be super for the builders!

Sounds great Markus. I subscribed to your You Tube channel quite a while ago. Your work is always interesting and I look forward to seeing more of it.

Cool video Markus,
Have lot of fun in India with Robyn 🙂

Nice work,,,, are the -Mecanum Wheels- on the other side any good..?- I v seen them on other projects and was wondering are they an improvement over the wheel or do they just look really cool,,,,,

Very interesting Markus, I’m surprised how well the mini joysticks + remote are reliable to control the arms and hands.

Great Markus!! This is cool to be able to control the arms gestures so easily.
Once in position, can you still « capture the gestures » by voice to compile them later into one gesture?

Hi Robyn,
Congratulations for your record !!!
Say Hello to Markus for me 😉

Looks great Markus, where did you get the battery cover panel from?

Great job Markus!! I love your wheel platform, especially when i see Robyn driving!!

Thanks for sharing that video, Markus. Looks like it was a good time. Did Gael mention any time frame for the legs to be released ?

Great video Markus!
Always on the cutting edge!
I recently tested the webkitrecognition during an event and got a bit frustrated with the delay for to get the responses from the server. When the wireless connection is poor, InMoov has to « think » for very long seconds, it can be up to 20 seconds which feels like an eternity on the front of the…En afficher davantage

Aaaah the French beret!

Ah finally switching also to a more recent version!

ProgramAB with the webkit recognition works SO much better now.

Last version 1114 still had trouble with loosing an Arduino and the jaw got fixed in version 1113 by Kevin.

Wooooiii we are close to a steady version, waiting for it since more than year, ahaha.

Finally robots will ask for vacation time????
Nice setup – how can I book it for myself?

Ehehe, once again Robyn is enjoying life for our own pleasure!
Always makes me laugh a lot!
Thanks for keeping up the cool videos.

Ahahaha!
Always love your videos! You could get a sound added like a hard curve driving.
Like iiiiiiiiiiiii
http://tubidydb.com/mp3/tire-screech-sound-effects.html

What a great concept Markus!
I will be glad to see that in Paris for the Makerfaire!
Where did you get those relay boards? Do you have a link?

Well Markus, this works very nice. I can see how effective this works, and the sensors seem to be working well.
I guess you could also use it to create gestures, if both arms were not coupled, using « capture gesture » voice command.

Yes i have both sensors working now thanks to Greg and they move separately.
and it is very easy to create gestures.
there are so many possibilities
for example interaction with people.
my experience is that many people want to touch and feel with their hands
and now Robyn will respond to that.

Nice work, Markus! I see lots of applications for these touch sensors. I have also experimented with them.

Nice works, Makus! I see lots of applications for these touch sensors, giving a robot the sense to « feel » is huge.

Amazing! Looks great, easy to imagine this in a variety of applications…

Super Great Markus!!
Actually we could make just a tactile bracelet for easy driving control!
That would be easier to make, because I remember you saying in a video, that it was a bit difficult to make the sensitive forarms sensors. And the videos does show the difficulties of the task.
I don’t remenber, did you use i2C to save analog entries on…En afficher davantage

Oh and I see that Robyn is getting ready for Christmas!

i have made some changes after this video because i needed more power to the motors but the sketch is sill basically the same

Markus, this is so great, I really love those mecanum wheels!
Are you using the Joystick service of MRL? Where did you get these cool little joystick? Can they work as remote control without cable?

Very cool, Markus! How do you have the controls arranged? For instance, how do you distinguish between « turn right » and « go sideways to the right »?

Woaaaahhh awesome!! Now its time to make space in the house to let InMoov ride around!!!
Just incredible to think you are able to build this wheel system with a 3D printer, ahaha! I have added your Thingiverse files to the InMoov collection. This is SO inspiring!

That looks great, Markus. I was wondering – how do you have your controls arranged to cause the 10 possible movments?

Fantastic,
Very Great Job, thank you very much Markus for sharing this,
Robyn is going to be able to do many tasks at home 🙂

Awesome Markus!
Thanks for sharing your work with the community!

Hi Markus,

Cool to see these results (I’ve seen your first video about this project at MRL)
It’s running fast to 🙂

I’m sure, Robyn will enjoy this new tool to.
Thanks for sharing this driving system for InMoov.

Aaah Markus, I’m glad you finaly post your video on InMoov site for other builders to see what you are working on!
Super progress!

Ahaha, nice time laps! Once you will have the bottom stomach parts, you will need to remove the head to make him fit.
Ready for Paris!!

Very precise gesture, Markus!!
I had done a video where I was grabbing a ball via InMoov using the Kinect and it was very delicate to achieve, Ahaha

Interesting solution. Have you tried to take by two fingers some things?

InMoov DJ !!
After doing party, Robijn is now choosing his own MP3’s.
Are you using Random the way it is used for talking?

Great, how does it « feel » you stand on a certain side? Is it because of the sound or is it with infrared sensors?
Don’t the microphones get disturbed with the buzzing noise of the servos of the head?

Hi Markus, is the keyboard connected in bluetooth to the PC?
If yes, is it something you implemented into the script or is it implemented above MRL?

Very good job Markus!! Scary when InMoov lean sideway, I felt it was going to fall, ahaha.

Totaly effective. Grog suggested to get the opening of the jaw bigger according to the level of sound using software, that would be good too.

Ahaha! I love it. When Robyn InMoov decides it’s party time, it’s intense in your home!!

Very nice Markus! Using a wide screen is good, I have chosen a much smaller screen to be mounted on the Odroid U3 and it is a bit hard to read on it.
Very interesting way of connecting the arms, I like the hdmi cables. What power supply do you use for the servos, Others might be interested about that.
Thanks for this instructive video!!!

Very beautiful design. We would like the photos with comments. You come up with the usage HDMI cable very nice.

Super! are you using the Neo Pixel Ring I use or is it done with color leds? If you use the Neo Pixel Ring, is it hooked to an extra Arduino or is it implemented within the two InMoov Arduinos?

Woo ooo, great idea! now InMoov can be made for domotic purpose.

very nice extra features for the Rock Paper Scissors play game. It is interesting how it seems like he really can understand what you are playing. For someone who doesn’t know, it can be very tricky.

Ehehe, cool pir detection and tracking, I’m wondering how you set your pir script to auto go on face tracking, I can’t even make him say « I was sleeping ».
Your video makes me laugh because when I wrote the script for « nice! You’re damn right », I thought it was going to be funny when other robots would say it. And now it happens.
Thanks to your…En afficher davantage

Any event is good, right? I saw the video on youtube with the music!

And another one in mother nature!! Well done Markus!

Hey this is cool scripts!! Good job Markus
I have been using your random scripts within my InMoov2.full3 script

I can’t imagine how much time this has taken to prepare. Thanks for posting. I like the idea to bring humor in your presentation!

Cool Markus, did you make the script available in
https://code.google.com/p/myrobotlab/source/browse/trunk/myrobotlab/src/resource/Python/examples/?r=2014

Nice video. What program are you using to interact with InMoov?

I got your reply, not sure if you got mine. I sure would be interested in being able to do that. Can you post or send me a sample of the script you use?

Very nice setup for a mini MakerFaire. I can see you got yourself some T-Shirt done. Robyn keeps his hat at all time!

Ahaha, this one is really great! Robyn InMoov feels cool being in the car.

Ehehe, very nice! InMoov in Stockholm! We want pics!

See, that’s why we need a male voice!! He wouldn’t give the gears for leaving your socks laying around but then you probably wouldn’t get him to vacuum!! Great video!!!!!

Great video. Please do share the script on this one.

looks great!!!

Finally pooring some drinks for humans. Soon will be time to sit back and wait for the drink to be served.

Ahaha, shooting Markus with the eyes!

Great! A proud Markus! Could you send me a copy of the magazine? I would like to keep that in my archives.

Ahaha, Thanks a lot. At first I thought it was going to be a video.
Merry Christmas to you and your Family.

Aaah, I had been wanting to do that for a long time! Because the cables sometimes get stucked and if they run in the rotation center it is more logic and simple. I have added your Thingy to the Derivatives collection in Download tab.

I’m glad you like it 🙂

hahahah … very good !

sensational! Very friendly, 🙂

Ha ha! fun to play around with.

InMoov’s first signature! Fantastic!

Very nice! Do you plan to print the other arm? When I run my InMoov with only one arm attached to the torso, I find it very unbalanced. The pressure applied on the whole structure is more heavy, it’s logic. Have you been able to use voice commands with MyRobotLab?

Yes i have just start printing the other arm..At the moment i am using a SSC-32 servo controller so i have not tried ardoino or my robbotlab. I am going to download and test it later.I have bin learning a little bit of pic processors and programming them . I have made simple circuit boards in other projects.

but i have never used ardoino before so i am excited to learn more.about it.