Don’t have enough space for a full size InMoov?
Here are links to build a small size InMoov at 64% scale.
https://inmoov.fr/wp-content/uploads/stl/MinMoov/MinMoov.zip
https://inmoov.fr/wp-content/uploads/stl/MinMoovHand/MinMoovHand.zip
These MinMoov and MinMoovHand files are provided under the licence CC-by-NC.
The MinMoovHand is designed by Gael Langevin, it is meant to use only two HK15298B servos set in the forarm, but you can set small servos for each finger if needed.
The files with names ending with (64%) are modified by Gael Langevin.
You will find also some parts that have been joined or modified by @Lecagnois.(https://inmoov.monsite-orange.fr)
It is best to check which parts have the same purpose accross directories to avoid printing unnecessary parts.
As an example, the torso(64%) directory might contains files that are similar in the torse directory modified_by_Lecagnois.
Note: I haven’t done any instructions for any of these parts, you can follow the normal size instructions which should be totally fine to understand the basics.
Regarding servos:
Because the whole robot is reduced at 64%, you can replace a servo HS805BB with a HK15298B
You can replace a servo HK15298B with a JX-1109MG.
