Site-Wide Activity

Rosario a publié une note il y a 1 an et 2 mois

Bonjour. J’ai un problème : voici ma séquence :

J’ouvre myrobotlab, je configure arduino.pa9685, servo et j’active le port et le PCA9685, ok Je sauvegarde, et tout fonctionne.

Lorsque je ferme myrobotlab et que je le rouvre, le module PCA9685 est en mode off, et je reçois une erreur indiquant que le PCA9685 n’a pas été trouvé. Le même problè…En afficher davantage

Peter Anderson a publié une note il y a 1 an et 2 mois

So, Amos moved under his own power for the first time in 7 years…and nothing burned out, Success!

Gagan deep a publié une note il y a 1 an et 2 mois

Latest update

Leandro a publié une note il y a 1 an et 3 mois

Does anybody have experience or know where i can get a tutorial for the i2 Head Eyes? I built them but i dont know if i was doing it right.

Troy a publié une note il y a 1 an et 3 mois

i am having trouble with the ultrasonic sensor i cant seem to get it working at the moment. when i try the test is comes up with attribution error not found. and also can i change the pins i wan to use? it says 63 and 64 but i have know idea where they are on the arduino mega haha. i was going to change them but didnt know if i could as it keeps…En afficher davantage

Troy replied il y a 1 an et 3 mois

Just to clarify I am using two arduino megas. I have gotten the ultrasonic sensor working using my own script but it confuses me on pin 63, 64? Is it meant to be A9, A10?

guytou01 a publié une note il y a 1 an et 3 mois

quel montage electronique pour inmoov
merci

Enrique Huerta a publié une note il y a 1 an et 3 mois

AI Ollama3.2 in myrobotlab, doesnt pronounce accents well. In languages other than english, for example in spanish, myrobotlab doesn\’t read words with accents, due to it changes accents by symbols like ^2,~1,… ,
I wonder if it were possible changing the language configuration so that it can read it correctly. Thank you buddies

Enrique Huerta replied il y a 1 an et 3 mois

I was trying put some orders to initiliazate Ollama like this « Write without accents » but it doesnt work, other orders like « write only with upcases » works well. But I dont know how to order Olalla to eliminate accents

Chris hamling a publié une note il y a 1 an et 3 mois

myrobotlab is a piece of shit program to use…..everytime i start up , i go to use a servo and it crashes. i then have to reload the software again, and when i go to use the servos again, it crashes AGAIN…….i am going to find a better software that doesnt crash at random…..:(

Aditya Waingankar replied il y a 1 an et 3 mois

Did you follow the procedural way? like first setting up your arduino on MRL then using the servos?
- Chris hamling replied il y a 1 an et 2 mois
  
  Tried all that….i am using the latest software, and everywhere I look for advice, it’s using old versions…..I go onto myrobotlab site to look for the older version and it doesn’t exist…..there is no procedures for latest myrobotlab software

Dayle Duguid a publié une note il y a 1 an et 3 mois

any instructions for I2 eyes and is anybody else struggling to print these very well, I\’ve printed with 100% infill and still missing bits off the end of straight rods and the eye lids seem so brittle and flimsy

Antonio a publié une note il y a 1 an et 3 mois

What is the suggested 3d printer for the project?

Paul Swingewood a publié une note il y a 1 an et 3 mois

I am back building inMoov (Bob) after a long absence. Things have moved on considerably. Excited to be back building again. Anyone else in the UK West Midlands area?

Rosario a publié une note il y a 1 an et 3 mois

J\’ai un problème sur la connexion du pca9685 qui n\’est pas reconnu par la carte Arduino gauche, mayrobotlab donne l\’erreur : ror i01.left : :\ »MrlCommError: périphérique n\’existe pas\ », lors du détachement ou du rattachement d\’un servo. Pouvez-vous m\’aider? J\’ai remarqué que le Mrlcomm.ino mis à jour ne dispose pas de la bibliothèque pour PCA9685.

Dayle Duguid a publié une note il y a 1 an et 4 mois

where are the I2 eyes and I2 eye lid stl files

Chris hamling a publié une note il y a 1 an et 4 mois

Need serious help…..I am running a 6v battery pack on my Inmoov, but the leds don’t light up and I can only use two servos at once……why is this?…..help please

Aditya Waingankar replied il y a 1 an et 3 mois

you should calculate the consumption of your servo motors and provide the voltage, current accordingly, for example: if your motors work at 6 volts and there are numerous motors, you should provide at least 30-40 amperes with 6 volts.
- Chris hamling replied il y a 1 an et 2 mois
  
  Ok…..just purchased a 6v 60amp power supply…..I’ll try on 5at

David_Houses a publié une note il y a 1 an et 4 mois

MANO I2 – ANTEBRAZO – BICEPS DERECHO Y HOMBRO ( FALTA IMPRIMIR LAS CUBIERTAS DEL ANTEBRAZO A PETG EN COLOR NARANJA.

David_Houses a publié une note il y a 1 an et 4 mois

ESTE FUÉ EL PRIMER ANTEBRAZO IMPRESO EN PLA DEL PROYECTO ( NO AGUANTÓ LA PRESIÓN DEL CABLE TRENZADO, SIGUIENTES IMPRESIONES EN PETG NARANJA Y CAMBIO DE MANO POR HAND I2