Sign in to our website and become an InMoov member. It will allow you to post message, pictures, and share with others InMoov builders. It's just one click away!
Identifiant ou adresse e-mail
Mot de passe
Se souvenir de moi
Justin Brawley a publié une note il y a 10 ans et 1 mois
Hello,
I was wondering if anyone could guide me into building this hand (as in picture) as a prosthestic for a man that has lost both his hands. I have been building and donating the hackberry hands for a little bit and a mans sister contacted me asking if i could donate one to her brother but i feel it wont be suitable for his particular…En afficher davantage
Aldric Negrier a publié une note il y a 10 ans et 1 mois
More photo updates 🙂
Christopher Pesantez a publié une note il y a 10 ans et 1 mois
Hello everybody….. we are students from ¨UNIVERSIDAD DEL AZUAY¨ http://www.uazuay.edu.ec/ located in Cuenca Ecuador, we are building the right hand, forearm and bicep of the inmoov. We hope you guys can help us if we were to have any questions, and thanks for welcoming us.
Le profil de Christopher Pesantez a été mis à jour il y a 10 ans et 1 mois
Le profil de Franz (Trixi) a été mis à jour il y a 10 ans et 1 mois
Getting ready for Maker Faire Lisbon in 2 weeks. Just wanted to post this nice photo and thank Gael for sharing this great project. Have dissembled all parts for painting, now sanding and polishing, printed in ABS with vinylester top coating.
Aldric, I’m local from Lisbon if you need anything just say it will be a pleasure to receive the inmoov community in my city!!
Ok, thank you Pedro. If possible, come see us at the maker farie on the 25 and 26 of this month. See you there 🙂
will definitely go!!
AHMET OGÜN a publié une note il y a 10 ans et 1 mois
For many years I wanted to make a humanoid robot. I met İnmoov. I started to do it now. This shall be my reference. I will publish my\’d done soon and manufacturing plans.
Ivor Nathan a publié une note il y a 10 ans et 1 mois
electrics…
Next stage welding of 3d frames and electrics…
Le profil de Devrim Ozgur/Ali Orhan Ozgur a été mis à jour il y a 10 ans et 1 mois
anthony a publié une note il y a 10 ans et 1 mois
Hi ! This a poc of NeopixelRing control from MRL. I think there is a better solution but it works for me. And I don’t know how to make a service. Ino come with some samples.
What I do : – Connect NeoPixel to Arduino Nano – Flash it with : https://github.com/MyRobotLab/pyrobotlab/blob/master/home/moz4r/Neopixel_MRL.ino – Connect Nano to computer…En afficher davantage
Vignesha Bhamidi a publié une note il y a 10 ans et 1 mois
I used the InMoov as part of my research project. Hope you guys like it! I used WinMoov control software – http://winmoov.com/
Mark Johnston a publié une note il y a 10 ans et 1 mois
The larger servos are finally ordered to articulate the shoulders and waist! Not long now \’til the first lecture delivered by robot! 😀
Bobby a publié une note il y a 10 ans et 2 mois
Flavio Freitas a publié une note il y a 10 ans et 2 mois
Gael, você tem as partes das costas do Inmoov.
Flavio, eu acho que o Gael ainda está a acabar uns retoques nas costas antes de pôr!!!
Olá Pedro, verdade. Eu já baixei as costas agora estou na espera das pernas.
Bartosz Scencelek a publié une note il y a 10 ans et 2 mois
Hello, this is my progres of the inmoov. I have a question, is anyone have a back parts?
No. Back parts dont shared 🙂
Ok. So I have to made this by myself. Thank You.
Gael will share back parts soon
FabLab UTmn a publié une note il y a 10 ans et 2 mois
Hello everyone! We are the group of students and professionals of the FabLab of Tyumen State University. We’ve come together on the 1st FabLab School for students. Then we’ve been working on this project started in FabLab by Kot Begemot The Great. We’ve already printed hand, forarm and parts of bicep, head and torso. Now we work on analogs of…En afficher davantage
Franz (Trixi) a publié une note il y a 10 ans et 2 mois
Markus a publié une note il y a 10 ans et 2 mois
Robyn Inmoov Youtube channel trailer
Dimitris a publié une note il y a 10 ans et 2 mois
Keep going!!
Robyn Inmoov joystick upgrade
Great job Markus!! I love your wheel platform, especially when i see Robyn driving!!
Ivor Nathan a publié une note il y a 10 ans et 2 mois
Nothing link starting right from the beginning. First build your 3d printer. All stainless steel frame. We are building three. Print area approx 220×260. Next drilling and welding…
Jeremy a publié une note il y a 10 ans et 2 mois
not sure how clear this picture is but i am having problems getting a nice finish on the last layers of my abs prints.
theres some pits, dont know if the hot end needs the temp turned up from 240 or if its clogged a little .
did you try to increase the number of top layers to print?
yeah the default was 1mm and i changed it to 2mm the same as my walls
I do not know of available settings in mm. I assume it is the number of shells and is depending on the selected layer height. For the outer shell you should probably use 3 shells, for top layers I would select 3-6 layers depending on the filling grade you selected. A low filling grade will result in wider gaps which will give you a less flat…En afficher davantage
yes 2 shells sorry im new to 3d printing i will try your suggestions today
so it seems that not enough filament is being extruded. i add a little pressure to the extruder tensioner it does better prints, but i cant sit there for hours holding it at the right spot and the spring doesnt seem to be doing much
This is a wheel base i made for my inmoov robot. The basic idea is from Gaels wheel base. You must have some welding skills to complete this base construction. The servos i use is turnigy 1270HV 40kg. You can find stl files for 3d printed parts at: http://www.thingiverse.com/thing:1548858
Le profil de Dimitris a été mis à jour il y a 10 ans et 2 mois
Aaron Wegner a publié une note il y a 10 ans et 2 mois
So far in this project I have converted all the right hand stl files to CAD files (I use inventor). I have had to make many corrections and additions to make things fit right as well as fix weak areas in the prints using thin (0.8mm) strips. I use acetone glue to attach the strips to strengthen the arm which has broken on me a couple of times as…En afficher davantage
aaron did you print he foreharm parts as one? i mean rob2&5 and 3&4?
I printed the forearm as two pieces for top and bottom (4 pieces total) and glued together as per instructions. Since I print with ABS plastic , I typically use the acetone glue method, however for the top and bottom of the forearm the mating surfaces don’t have uniform contact so the joint was weak. So after tacking with acetone glue I injected…En afficher davantage
That forearm as 1 unit looks great! I am getting ready to begin printing my arms. I was wondering what a solid piece would look like.
Can you tell me where to get the stl for the one unit forearm? mine look a bit stupid as 2 pieces and will probably break
as per above I posted above this is 2 pieces and needed to be glued together. Since I use ABS plastic for my prints. Splitting is a real problem for tall thin items which only get worse for really all items. Lower shrinkage plastic – like PLA may work better for a combined part. I consider this version a prototype and I have decided to start work…En afficher davantage
About 90% done with the right hand. Just need to wire up the board and program in Arduino. This last bit I am leaving to some STEM kids in middle school
Hi Ivor here, Working for an engineering company in Australia as the marketing manager. I am currently building a 3 printer at the moment (not a company project but as hobbyist under the supervision of our robotics designer). When complete I will start on the bot. Looking forward to it!
Look for Humanoid, she is from down under too and is at least in your time zone and quite active in the MRL shoutbox.
Thanks for that, I have made contact.
Hi there. I only just got your message as I’ve been hovering mainly around the myrobotlab shoutbox. I’ve just finished the head, torso, left arm, shoulder and lower stomach. Currently printing the right arm. Highly recommend the myrobotlab web-site. They are really helpful and friendly. Good luck with your 3D printer.
Ian a publié une note il y a 10 ans et 2 mois
Modernized front part and the head part of my robot.
Excellent finish lan – and good color scheme as well, cant wait to see it completed !
Head: did you close openings after printing or do you have an stl from the complete head? Are your willing to share it?
excellent chest piece and updated face. Are you willing to share it. It looks amazing keep up the awesome work.