Site-Wide Activity

Markus a publié une note il y a 12 ans et 3 mois

Bob Houston replied il y a 12 ans et 3 mois

looks great!!!
Gael Langevin replied il y a 12 ans et 3 mois

Finally pooring some drinks for humans. Soon will be time to sit back and wait for the drink to be served.
- Dwayne Williams replied il y a 12 ans et 3 mois
  
  This I know will happen. I am thinking over leg design every chance I get. Biotronic Exoskeletons give me some really clean designs. Luckily I already have a host of 12volt linear actuators laying about.

peter a publié une note il y a 12 ans et 3 mois

Robbie now runs ROS moveIT for arm navigation

Gael Langevin replied il y a 12 ans et 3 mois

EHEHE! Very nice! Have you been able to also launch the robot after the simulation was done?
- peter replied il y a 12 ans et 3 mois
  
  They are the same when, you are happy with the result then press run and the arm will move
  - Gael Langevin replied il y a 12 ans et 3 mois
    
    Would love to see a video of that!
    - peter replied il y a 12 ans et 3 mois
      
      I’m editing one now will upload it tonight
      - Gael Langevin replied il y a 12 ans et 3 mois
        
        whooo ooo, cool!

Bob Houston a publié une note il y a 12 ans et 3 mois

My Granddaughter thought InMoov should see it’s self in a mirror, so we made this video. The script for is attached.

def lookatmyself():

inMoov.moveHead(90,90)
inMoov.moveArm(« left »,0,90,30,10)
inMoov.moveArm(« right »,10,85,18,31)
inMoov.moveHand(« left »,130,180,180,180,180,90)…En afficher davantage

Bob Houston a publié une note il y a 12 ans et 3 mois

Here’s a link to » InMoov needs a new finger », You Tube video and the script for it.

def printfinger():
sleep(5)

inMoov.moveHead(23,90)
inMoov.moveArm(« left »,63,90,50,10)
inMoov.moveArm(« right »,0,90,30,10)
inMoov.moveHand(« left »,165,0,180,180,180,90)
inMoov.moveHand(« right »,0,0,0,0,0,90)…En afficher davantage

Wayne Kinne replied il y a 12 ans et 3 mois

very cool
Gael Langevin replied il y a 12 ans et 3 mois

Great! This one really made me laugh! Thanks for sharing the scripts!

Bob Houston a publié une note il y a 12 ans et 3 mois

Here’s the script for InMoov counting fingers.
def howmanyfingersdoihave():
ear.pauseListening()
sleep(1)
inMoov.moveHead(49,87)
inMoov.moveArm(« left »,75,83,79,24)
inMoov.moveArm(« right »,65,82,71,24)
inMoov.moveHand(« left »,74,117,125,157,168,92)
inMoov.moveHand(« right »,89,80,98,120,114,180)
sleep(2)…En afficher davantage

Dwayne Williams a publié une note il y a 12 ans et 3 mois

Well the build is coming along nicely. I just wish it would go a bit faster.

Bob Houston a publié une note il y a 12 ans et 3 mois

Here’s a video of my InMoov counting it’s fingers.

InMoov counting fingers – YouTube

http://youtu.be/0iu8CQb1lo8

Loading…

Dwayne Williams a publié une note il y a 12 ans et 3 mois

Getting A-head on InMoov
Moving along nicely now. Doing the internals for the head.
What fun watching it all come together.

Markus a publié une note il y a 12 ans et 4 mois

Inmoov got angry because i didn’t fix the hand. 😉

Gael Langevin replied il y a 12 ans et 3 mois

Ahaha, shooting Markus with the eyes!

Dwayne Williams a publié une note il y a 12 ans et 4 mois

Birth Of A InMoov
And the build continues. Man what sweet fitting parts very little rework to have these parts fit together like gloves.

Gael Langevin replied il y a 12 ans et 3 mois

Skin color plastic or is it the light? This time your prints worked well!
- Dwayne Williams replied il y a 12 ans et 3 mois
  
  Actually it is brass colored from Protoparadigm. I do like the resemblance to human skin. And the second time around printing worked great. Moving ahead as quickly as I dare.

Markus a publié une note il y a 12 ans et 4 mois

inMoov tracking

Markus a publié une note il y a 12 ans et 4 mois

Wanna play tennis?

Ray a publié une note il y a 12 ans et 4 mois

Just started with my InMoov project. I’ve printed the finger starter and am awaiting servo to complete. I’ve also started printing the parts for the right hand and forearm. I’m really excited to get involved with this project and want to thank Gael for all the hard work in putting this project together. I hope to be able to contribute as I…En afficher davantage

Gael Langevin replied il y a 12 ans et 4 mois

We will enjoy seing your pictures during progress! Welcome

Alessandruino a publié une note il y a 12 ans et 4 mois

New white face for inmoov 🙂 Parts printed and assembled so far…

Gael Langevin replied il y a 12 ans et 4 mois

Very good! May I suggest coloring in black, blue , green or brown the ring that goes in the eye globe? Wider the iris will be, the less strange he will look 🙂 It ‘s good you decided to reprint the face in white.
- Alessandruino replied il y a 12 ans et 4 mois
  
  Ya.. I will 🙂 i think black… 🙂 look at new 4pid tracking video i made with inmoov 🙂 it is short but spooky 🙂
  - Gael Langevin replied il y a 12 ans et 4 mois
    
    Yeah! Super I google it for other members
    - Alessandruino replied il y a 12 ans et 4 mois
      
      PID values need tweaking.. And i made the video with your default limit (not best values for my reversed build )
      - Gael Langevin replied il y a 12 ans et 4 mois
        
        My values are restrained because the mecanism hits the side of the head. As you know you have a better versio of the mecanism and head then me. I use previous versions with little design problems…

Dwayne Williams a publié une note il y a 12 ans et 4 mois

Well first prints of my InMoov build. Fail, forgot to turn on supports and knocked print off of bed at 95%. Resolution Looked great though. Will hit it with a vengeance tomorrow.

peter a publié une note il y a 12 ans et 4 mois

Navigating is getting better all the time here we are using ROS smach to go via 2 way points and arrive at a 3rd point. Later we will add arm movement so we can get a object

http://escaliente-robotics.blogspot.com.au/

Gael Langevin replied il y a 12 ans et 3 mois

Oh I wish my would be on wheels too, why do I have to make legs!!

peter a publié une note il y a 12 ans et 4 mois

Robbie’s first autonomous navigation through a gap

http://escaliente-robotics.blogspot.com.au/

JP replied il y a 12 ans et 4 mois

IT’S ALIVE!!!!!!!!!!!!!
You kick ass.
Nice work man.
What kind of accu did you use?
Gael Langevin replied il y a 12 ans et 4 mois

Very nice! Can the road map be more complex with different locations?
- peter replied il y a 12 ans et 4 mois
  
  Yes using the action server i can set goals when the goal is reached the next action is preformed ie next location or get the cup, open the door. some of these i have already

Markus a publié une note il y a 12 ans et 4 mois

Markus and InMoov on Swedish television.

Han gör robot med 3D-skrivare – Nyheterna – tv4.se

http://www.tv4.se/nyheterna/lokala-nyheter/han-g%C3%B6r-robot-med-3d-skrivare-2525263

Skådespelaren Johan Rheborg har under många år fotograferat sina kollegor inom teater och film. Oftast bakom scenen, i väntan på att g…

En afficher davantage

Markus a publié une note il y a 12 ans et 4 mois

Alex a publié une note il y a 12 ans et 4 mois

From Russia with love

Gael Langevin replied il y a 12 ans et 4 mois

Thanks for posting!
This is our first know Russian InMoov.

Markus a publié une note il y a 12 ans et 4 mois

Inmoov and i in the local newspaper

Gael Langevin replied il y a 12 ans et 4 mois

Great! A proud Markus! Could you send me a copy of the magazine? I would like to keep that in my archives.
- Markus replied il y a 12 ans et 4 mois
  
  yes! no problem. 🙂
- Markus replied il y a 12 ans et 4 mois
  
  to wot address ?

Rick Wessels a publié une note il y a 12 ans et 5 mois

And the second picture (hand placed well)

Gael Langevin replied il y a 12 ans et 4 mois

Great, now lets see it work. I’m glad you added the rotational wrist and finally placed correctly the hand to the wrist.

Rick Wessels a publié une note il y a 12 ans et 5 mois

Completed the Lefthand and Rotational Wrist. I know that the hand isn’t placed well on the wrist on the first picture. By the way, I printed the pegs (takes only a few minutes!

Bob Houston a publié une note il y a 12 ans et 5 mois

Merry Christmas and all the best in the New Year

InMoov Xmas – YouTube

http://youtu.be/ULqmL2pUBGw

Loading…

Markus a publié une note il y a 12 ans et 5 mois

merry Christmas everyone!

Gael Langevin replied il y a 12 ans et 5 mois

Ahaha, Thanks a lot. At first I thought it was going to be a video.
Merry Christmas to you and your Family.

Drew Rogge a publié une note il y a 12 ans et 5 mois

Here’s a picture of my InMoov head. I’m using a wooden angle plate to hold it while I work on the arms.

Gael Langevin replied il y a 12 ans et 5 mois

Very simple and good idea for to use only the head. Thanks for sharing.

Alessandruino a publié une note il y a 12 ans et 5 mois

Printing the shoulder !!

Gael Langevin replied il y a 12 ans et 5 mois

whoooo oo, do you have the HS 805BB already?
Alessandruino replied il y a 12 ans et 5 mois

Not yet 🙁 maybe after christmas…

Bob Houston a publié une note il y a 12 ans et 5 mois

A short video of my inMoov.

InMoov Video – YouTube

http://youtu.be/arbTMq5XhA0

Loading…

jhack a publié une note il y a 12 ans et 5 mois

well the day was fun and successful, the kids loved InMoov and had lots of question and i ended up demonstrating him to about 100 kids.

Gael Langevin replied il y a 12 ans et 5 mois

Fantastic, a hundred kids! Think of it, the first 3D printed robot these kids have ever seen, and you were the one to show them. Congratulations.

Gael Langevin a publié une note il y a 12 ans et 5 mois

very cool! Man the students are going to go wild! If you get a minute (not sure you will) please make a picture, I would love to see that.

Alessandruino a publié une note il y a 12 ans et 5 mois

Kinect holder printed and assembled..whoo hoo

Gael Langevin replied il y a 12 ans et 5 mois

Tadada! I can tell the printed is not having a moment to breath back. 🙂

Markus a publié une note il y a 12 ans et 5 mois

I made some shoulder modifikation for cables

Inmoov shoulder modifikation for cables by Stenson – Thingiverse

http://www.thingiverse.com/thing:199154

You must be logged in to post a comment.

Gael Langevin replied il y a 12 ans et 5 mois

Aaah, I had been wanting to do that for a long time! Because the cables sometimes get stucked and if they run in the rotation center it is more logic and simple. I have added your Thingy to the Derivatives collection in Download tab.
Markus replied il y a 12 ans et 5 mois

I’m glad you like it 🙂

Don Kelley a publié une note il y a 12 ans et 5 mois

Hi All,
I am really thrilled about this project. Thanks Gael. I have printed the head(face,eyes,jaw,skull) and right forearm. Am now working on the neck. I have not received any of my servos yet(backordered) so movement is still a ways off. I am using a Makerbot Replicator 2 to print this in PLA. I am located in Pennsylvania (South Central), USA.…En afficher davantage

Gael Langevin replied il y a 12 ans et 5 mois

Great! another InMoov robot to be born. Did you put yourself on the builders map? Let us see your pics.

jhack a publié une note il y a 12 ans et 5 mois

InMoov is going to school, I\’ve been asked by my brother ( a school teacher) to show InMoov and 3D printing to his year 11 students this week.