Sign in to our website and become an InMoov member. It will allow you to post message, pictures, and share with others InMoov builders. It's just one click away!
Identifiant ou adresse e-mail
Mot de passe
Se souvenir de moi
Markus a publié une note il y a 8 ans et 3 mois
Robyn inmoov Vlog 10
Robyn Inmoov Vlog 9
Robyn Inmoov Vlog 8
Robyn Inmoov Vlog 7
Robyn Inmoov Vlog 6
Roger a publié une note il y a 8 ans et 3 mois
Hi friends! I`ve got a big problem with my arduino (mega) and the communication to MRL (Bad number 0 – rx error)! Who can help? Thanks!
Take a look at this http://myrobotlab.org/content/arduino-mrl-error-bad-magic-number-10-776-rx-errors-solved
Hi Mike! Thank you for answer my question. I will try the link
Pierre Hould a publié une note il y a 8 ans et 3 mois
Le projet avance. Le torse est terminé. Au sujet de Kinect, je vous recommande (si cela n’a pas été fait dans le forum) de vous procurer le livre Making things see dont la photo de la couverture est jointe ici. Tout savoir sur le Kinect et ses possibilités. 🙂
Le profil de Frodo a été mis à jour il y a 8 ans et 3 mois
Le profil de Isabel a été mis à jour il y a 8 ans et 3 mois
Isabel a publié une note il y a 8 ans et 3 mois
Just starting my InMoov journey! Almost finished printing the forearm and will start the assembly.
This is my first time printing this extensively with ABS, does anyone have any tips for getting rid of the waviness in the walls and the infill not fully attaching to the wall? I’m using an Ultimaker 2…En afficher davantage
Hello ! congratulations on your progress! for the ripples is wobble, you find on thingiverse anti-wobble pads, you can also separate the top of the threaded rods of the frame, the set gives a good result. 2nd solution: it is possible to replace with trapezoidal rods without skates but you have to change the firmware. for filling I do not know too…En afficher davantage
thanks for the tips, ill give them a try!
Dominique a publié une note il y a 8 ans et 3 mois
This Face tracking and yolo process in the same time. Two camera, one for tracking, one for yolo.
What is YOLO and what does it do? Your face tracking is very good.
With yolo, you can do this: http://myrobotlab.org/content/yolo-dnn-support-now-opencv
For face tracking, i use tracking service from MRL
oeilG = Runtime.create(« oeilG », « OpenCV ») oeilG.setFrameGrabberType(« org.myrobotlab.opencv.SarxosFrameGrabber ») oeilG = Runtime.start(« oeilG », « OpenCV ») oeilG.setCameraIndex(0) tracking =…En afficher davantage
That’s cool, def need to check out the code for this thanks for sharing
Anmar Mashat a publié une note il y a 8 ans et 3 mois
Hello, i want to ask what is the best camera with high quality i can use it on the eye ?
Reimarc a publié une note il y a 8 ans et 3 mois
Hi All, any recommendations on a 3d printer to get started? Eager to get the project going….truly amazing initiative to get started! 🙂
It’s going to be dictated by how much you’re willing to spend. The requirements for the size put you into a different level than simply cheap crap but do keep in mind you get what you pay for with these. Look at your future use and know that there are a ton of parts to print..then assemble. The better the machine, the better it’ll look and the…En afficher davantage
Thanks a mil Team Sammy 🙂 Good advice and I will definitely consider it!
Stéphane Abello a publié une note il y a 8 ans et 3 mois
Debut du projet ! Je commence par la tête 🙂
Nigel a publié une note il y a 8 ans et 3 mois
Great project Gaël!
When I showed my wife, she said wouldn’t it be nice if old people could have one to keep them company.
Just waiting for my 3D printer to arrive, can’t wait.
James Kruse a publié une note il y a 8 ans et 3 mois
Progress
New back panel installed