Site-Wide Activity

James Kruse a publié une note il y a 8 ans et 5 mois

New back panel installed

Bob Houston a publié une note il y a 8 ans et 5 mois

Markus replied il y a 7 ans et 9 mois

Hi!
This is a really good looking wheelbase.
I’m going to do something like that for Robyn.

Perry a publié une note il y a 8 ans et 5 mois

Bob Houston replied il y a 8 ans et 5 mois

Nice, when will we hear some tunes?

SwanRobotics.com a publié une note il y a 8 ans et 5 mois

I finally made some progress on the inMoov robot after the crash 2 years ago.

dan replied il y a 8 ans et 5 mois

Nice to see you’re working on him again. The picture after the fall was heartbreaking.
- SwanRobotics.com replied il y a 8 ans et 5 mois
  
  Thanks @danf

James Kruse a publié une note il y a 8 ans et 5 mois

Another view

Dropbox – IMG_2875.MOV

https://www.dropbox.com/s/ipwqw7kmuqyr208/IMG_2875.MOV?dl=0

Shared with Dropbox

James Kruse a publié une note il y a 8 ans et 5 mois

Vid of the first finger working with a micro servo

Dropbox – IMG_2876.MOV

https://www.dropbox.com/s/qlnniivmjcyfldv/IMG_2876.MOV?dl=0

Shared with Dropbox

Bob Houston a publié une note il y a 8 ans et 5 mois

I’ve added some new parts to my InMoov.

James Kruse replied il y a 8 ans et 5 mois

That’s so cool!
Mindless replied il y a 8 ans et 5 mois

Awesome work,,, The Clean Prints and Cable Wraps really makes him a Fine Specimen
- Pierre Hould replied il y a 8 ans et 5 mois
  
  Congratulations! What a beautifull base you made!!
  - Pierre Hould replied il y a 8 ans et 4 mois
    
    Bob? What did you use for the power! Is it a mother board that drives your robot or a notePad! Thanks in advance! 🙂 PS: Excuse my English!

James Kruse a publié une note il y a 8 ans et 5 mois

Hand servos for #inmoov flex hand. But now I see a new plan to put Gael’s design micro servos at 90degrees

Mindless a publié une note il y a 8 ans et 5 mois

Hay Guys & Girls -Mr Gail
I almost finished organizing all the files and stuff for my Modded Inmoov Arm – I will be posting it on Wevolver and NoT Thingiverese ,,,
I found this YouTube Video on my downtime that a though was really worth sharing even though its got nothing to do with Inmoov but at that some time it could – ,, anyway this will be…En afficher davantage

Bob Houston a publié une note il y a 8 ans et 5 mois

I have uploaded a Battery Door with the MRL logo on it to Thingiverse.
http://www.thingiverse.com/thing:2796925

James Kruse replied il y a 8 ans et 5 mois

I have printed the top door and it looks great, thanks

Gerhard a publié une note il y a 8 ans et 5 mois

i start building my robot !

Mindless a publié une note il y a 8 ans et 5 mois

Hay Guys,,, Not sure how many of ya have seen this,,,, but this Dude is my kind of Robotic Engineer and deserves A+++

Perry replied il y a 8 ans et 5 mois

Thanks for posting this mindless. I have watched it 3 times so far and can’t get enough. If you go to their website check out their ‘singer’
- Mindless replied il y a 8 ans et 5 mois
  
  No worrries Perry,,, i thought is was rather cool and worth sharing 🙂
  P.S- I posted one more that is very interesting

joao luiz morales a publié une note il y a 8 ans et 5 mois

first head test
I’m from Brazil.

Perry replied il y a 8 ans et 5 mois

Nice looking prints. Where in Brazil are you?
- joao luiz morales replied il y a 8 ans et 5 mois
  
  I’m from São Paulo
  In Brazil it is more difficult to find servos at low cost
  for this it takes more time to develop my project
  - Marcos R. Weimer replied il y a 8 ans et 4 mois
    
    Ola João! Tem algum grupo especifico para o Brasil? A mais de 1 ano venho lendo e estudando, estou próximo de iniciar esta jornada e trocar idéia com brasileiros seria excepcional.
    
    Hello John! Do you have a specific group for Brazil? For over a year I have been reading and studying, I am close to starting this journey and exchanging ideas with Br…En afficher davantage
    - joao luiz morales replied il y a 8 ans et 4 mois
      
      Ola marcos, existe um grupo chamado vilamaker aqui em São Paulo.
      já fui em algumas montagens da mão do inmoov, mas eles estão meio devagar com o
      projeto.
      
      Hello,Marcos there is a group called vilamaker here in São Paulo. I’ve been in some montages of inmoov’s hand, but they’re kind of slow with the project.
      - Marcos R. Weimer replied il y a 8 ans et 4 mois
        
        Sou do interior do Paraná, aqui não se encontra nada.
      - joao luiz morales replied il y a 8 ans et 4 mois
        
        entendo
        se inscreva no meu canal para obter informaçoes

Bob Houston a publié une note il y a 8 ans et 5 mois

Uploaded a couple of plates for InMoov’s back on Thingiverse, http://www.thingiverse.com/thing:1616318
As I said in the notes , if anyone has Myrobotlabs logo in an STL. I would be happy to make a battery door with that on it to.

Robert O'Quinn replied il y a 8 ans et 5 mois

awesome! thank you..
- geoff jones replied il y a 8 ans et 5 mois
  
  you can download 2 versions of an stl file for the MRL logo here
  https://www.dropbox.com/s/f3ksaz3s7l6peb3/mrl%20logo1.STL?dl=0
  https://www.dropbox.com/s/83j98uht0sqzx7n/mrl%20logo2.STL?dl=0
  let me know if you want them a different size or thickness
  regards
  geoff
  - Bob Houston replied il y a 8 ans et 5 mois
    
    Thanks geoff, I have uploaded the battery door with the MRL logo on it to Thingiverse.

javier a publié une note il y a 8 ans et 5 mois

javier replied il y a 8 ans et 4 mois

thanks

James Kruse a publié une note il y a 8 ans et 5 mois

8 20kg servos ordered- JX PDI-6221MG 20KG Aluminium Metal Gear; hoping they fit

Ray Edgley replied il y a 8 ans et 5 mois

I have a few of those servos fitted to my Inmoov robot Fred, that work a lot better than the MG966R
You will have no regrets there
- James Kruse replied il y a 8 ans et 5 mois
  
  Excellent
Acapulco Rolf replied il y a 8 ans et 5 mois

Hi James, you can find a step by step guide for these servos here : https://groups.google.com/d/msg/inmoov/FW3tZmAdfBs/mViAr9aXAwAJ
- James Kruse replied il y a 8 ans et 5 mois
  
  Thanks!

James Kruse a publié une note il y a 8 ans et 5 mois

Today’s experiment is 5 micro servos in a flexible filiment joint hand

Ray Edgley replied il y a 8 ans et 5 mois

Let us all know how you go with these, it looks good

James Kruse a publié une note il y a 8 ans et 5 mois

Inmoov looks better with some color!

lorn campbell replied il y a 8 ans et 5 mois

looking good!

David a publié une note il y a 8 ans et 5 mois

Roughly 70 hours into the left bicep. All that’s left are the covers. By chance, does anyone know what bolt is used to connect the bicep servo holder to the rob part 4? I don’t see it mentioned anywhere in the build instructions.

Daniel Schindler replied il y a 8 ans et 5 mois

I was using this bolts:
http://www.thingiverse.com/thing:1737714

Clivem a publié une note il y a 8 ans et 5 mois

My build is continuing.
I have completed the hand/forearm and have ordered the servos. Printing overnight every night now to have the parts ready for the servos when they arrive.
Having fun as this is the greatest project I’ve ever done.
More on my blog at automatedvehicles.blogspot.com.au
Can’t wait to get the bicep then torso…En afficher davantage

Perry replied il y a 8 ans et 5 mois

I like the color scheme.

Mark Seaton a publié une note il y a 8 ans et 5 mois

Just a quick throw together while waiting for the camera. What size screws do you use to screw the eyes to the mounts? They seem very small but long.

Mark Seaton a publié une note il y a 8 ans et 5 mois

Hi, I started this project recently and have been ordering parts as I go. I have ordered a camera for the eyes, but only 1 was available. You say it has 2 cameras, but only 1 works in windows. My question is, do you require 2 cameras for tracking or any function at this stage? or is 1 OK?
Thankyou in advance, and thankyou for this wonderful…En afficher davantage

Tony Lawley replied il y a 8 ans et 5 mois

You only need one camera.
Ray Edgley replied il y a 8 ans et 5 mois

A lot depends on how powerful your computer is, some people have used two computers, one for the object/facial recognition while the other is used for object tracking and the rest of the Inmoov.
For a beginner in the system you can get away with just the one.

Richard Tracy, II a publié une note il y a 8 ans et 5 mois

Forearms are printed and servos are in. Awaiting fishing line and springs

Clivem a publié une note il y a 8 ans et 5 mois

Hi all,
I am new to this forum and to robotics though I have had a lifetime interest.
After getting a 3d Printer for Christmas it opened up a whole new world to me.
I have built a different version of the arm then found the Inmoov site.
Wow.
I have just completed the right hand and forearm and successfully installed the software and got it to…En afficher davantage

Campus Tecnológico Madrid a publié une note il y a 8 ans et 5 mois

Hi,

Just a quick question. I bought the nervos on the online shop a few days ago. How long will the delivering take from France to Spain?
There is no way I can see the status, is there?

Thanks very much,
Campus Tecnológico Madrid

Miguel Ángel replied il y a 7 ans et 2 mois

I received them in less than 15 days

David a publié une note il y a 8 ans et 5 mois

Fore arm is nearly complete with only the outer anterior piece left to print. I need to source the springs or print the alternate tensioner:

Inmoov TENSIONER ELASTIC VERSION by heisenberg333 – Thingiverse

https://www.thingiverse.com/thing:1573521

This is my new tensioning finger of Inmoov . Very easy installation…

En afficher davantage