Site-Wide Activity – Что такое цена: функции, виды, формирование и отличие от стоимости

Pierre Hould posted an update 7 years, 10 months ago

The head is almost completed. I’m printing the torso now! 🙂
La Tête est pratiquement terminée. Je m’attaque au torse dès maintenant! 🙂

Jacques replied 7 years, 8 months ago

Bonjour Pierre,
Je viens tout juste d’etre accepter comme membre,j’avais perdu espoir. bref j’aimerais bien faire ta connaissance pour se rencontrer si posssible pour discuter de INMOOV un projet qui m’intéresse au plus haut point.J’aurais beaucoup de question a te poser, je trouve ca plus simple en personne que par écrit.
Merci d’avance en e…[Read more]
- Pierre Hould replied 7 years, 8 months ago
  
  De quel endroit es-tu Jacques?
  - Jacques replied 7 years, 8 months ago
    
    Je sais pas si tu as recu mon message , je vais le répeté, je suis de Mont-Laurier au nord de montreal,j’ai merais bien te rencontrer pour vois ton INMOOV et voir quel imprimante tu utilises, je compte acheter la cr10s. et toi tu es de quel région ?

Daniel Schindler posted an update 7 years, 10 months ago

Hi, i am from Germany near Stuttgart. I started with the robot in 2015 and I worked on it when i had some free time. After about 2 years i finally finished my inmoov. I posted some pictures of the current result in my album. It was a really fun project and the result is great. Thanks to Gael for his wonderful work.

Mark Seaton posted an update 7 years, 10 months ago

I only discovered this project by chance in December. I saw someone post a link and I watched some videos and was hooked. At first I thought I may just make the hand as a bit of fun. But after ordering the servos and arduino boards I had a bit of a wait for them to arrive, so started printing pieces. As I didn’t have any white filament, I printed…[Read more]

Daniel Schindler replied 7 years, 10 months ago

thankfully you will be able to get it running without programming. there is a great instruction on how to get myrobotlab with inmoov running.

https://github.com/MyRobotLab/inmoov/wiki/HOWTO—SETUP-&-PREREQUISITES

When using the arduinos directly, you mostly just set the positions of the servo potis.

Daniel Schindler posted an update 7 years, 10 months ago

And his back

Daniel Schindler posted an update 7 years, 10 months ago

My InMoov called Robert

Gerhard replied 7 years, 10 months ago

Wow. Unglaublich…

Daniel Schindler posted an update 7 years, 10 months ago

Custom neopixel ring with 10 leds

Daniel Schindler posted an update 7 years, 10 months ago

InMoov running with LattePanda

Ray Edgley replied 7 years, 10 months ago

What spec Latte Panda are you running?
I waiting for my Latte Panda Alpha to arrive, not due until May.
- Daniel Schindler replied 7 years, 10 months ago
  
  I am running mrl on LattePanda 4G/64G. It’s a bit laggy when starting up but runs fine when using it. I also use their touchpanel 7”.

John Hughes posted an update 7 years, 10 months ago

Hi

I have got as far as printing everything in the torso section as seen in the pictures. I had wanted to have this standing on my desk with the head attached but it is obviously going to be top heavy. Would I need to basically continue to the Mid Stomach which seems to have a flat base to create something that would support the head and torso,…[Read more]

David posted an update 7 years, 10 months ago

Here are some pics of the left hand so far:

Markus posted an update 7 years, 10 months ago

Robyn Inmoov Vlog 5

Robyn Inmoov Vlog 5 – YouTube

https://www.youtube.com/watch?v=BoSo2PnjuSo&lc=z22lcvobtyyfz5iwr04t1aokgdlp4putrsjzxq2v1fozbk0h00410

Hi ! This is a Vlog about what I do in my Workshop and when I travel to events near and far. i’m mostly working with my inmoov robot Robyn but I do other thi…

Perry posted an update 7 years, 10 months ago

Designing a new head layout. Moving the mounting of the eyes to the head as opposed to the face.

Roy posted an update 7 years, 10 months ago

How do I check the status of an order? I ordered (#10120) Nervo Bd+components x2 on Jan 11 and last tracking update was Jan 19.

Joe Lacina posted an update 7 years, 10 months ago

David posted an update 7 years, 10 months ago

Prior to joining this site, I printed a complete right hand from PLA as a sort of prototype for experimentation. I used 1.75mm filament for finger joints and super glue for finger pieces. The parts were all printed at .2mm resolution with the recommended printer settings.

Taking what I learned from that prototype, I have recently started on the…[Read more]

David replied 7 years, 10 months ago

Well, PETG is out. After using it for the hand cover, I cannot get it to stick for the life of me for the finger covers. I’ve tried the default layout, upside, standing, and sideways, all with and without supports, rafts, etc. I only chose it over ABS because that’s what I had in orange. Looks like I’ll be ordering orange ABS.

John Hughes posted an update 7 years, 10 months ago

Hi

I am doing the main chest area at the moment and I am printing the supports around the Kinect. Have printed the two InterKinectMidV1s for the center. I have printed two InterKinectSideV1’s. Is that all I need to print of them, or are there four needed. Its hard to tell from the assembly pictures. It looks like just two are needed one on each…[Read more]

Arthur posted an update 7 years, 10 months ago

Just started with building inMoov, first photo..

Perry replied 7 years, 10 months ago

Always fun when the first parts start coming out of the printer.
Arthur replied 7 years, 2 months ago

This is printed with PLA. I started from scratch on 1 september 2018, using PETG now 😉

salvatore lucà posted an update 7 years, 10 months ago

this servo for the mg995 jaw is fine?

dan replied 7 years, 10 months ago

I think it would be fine. I am using a mg996 and it works well.

Team Sammy posted an update 7 years, 10 months ago

We have our right hand, wrist and forearm assembled. After waiting for nuts and bolts to arrive we are going to start having lots more fun soon!

Julian posted an update 7 years, 10 months ago

Just wanted to give a update to my build: I haven\’t started building yet. I\’m just planning right now (boring stuff :D). I came to the conclusion, that I want to make my own PCB specifically for this robot just to fit it my needs better! I hope, that I can share more information soon!

Paco Álvarez posted an update 7 years, 10 months ago

Coming back after ¿one year? very busy.
Here we go again!!

Steve Rayner posted an update 7 years, 10 months ago

I see in the STL parts library there is now new versions of the should and bicep. Do I assume that if I build the new bicep, then I also need to build the new shoulder? Are these new parts compatible with the original forearm and torso?

Markus posted an update 7 years, 11 months ago

Robyn Inmoov vlog 4

Robyn Inmoov vlog 4 – YouTube

https://www.youtube.com/watch?v=fo2LctM1W9U&t=1s

Hi ! This is a Vlog about what I do in my Workshop and when I travel to events near and far. i’m mostly working with my inmoov robot Robyn but I do other thi…

Vandamme posted an update 7 years, 11 months ago

Perry replied 7 years, 11 months ago

Nice prints
Mindless replied 7 years, 10 months ago

Very nice finish ,,, i assume it’s a Acetone finish–
- Steve Rayner replied 7 years, 10 months ago
  
  Very nice. Did you print separate parts for the upper and lower face and then merge them together?

Emad fathi posted an update 7 years, 11 months ago

salvatore lucà posted an update 7 years, 11 months ago

I bought two hercules cameras for the eyes.
Can I put an eye on it, that is, all are two for the eyes?

Markus posted an update 7 years, 11 months ago

Robyn Inmoov Vlog 3

Robyn Inmoov Vlog 3 – YouTube

https://www.youtube.com/watch?v=EzR9i91n-7I&t=15s

Hi ! This is a Vlog about what I do in my Workshop and when I travel to events near and far. i’m mostly working with my inmoov robot Robyn but I do other thi…

Markus posted an update 7 years, 11 months ago

Robyn Inmoov Vlog 2

Robyn Inmoov Vlog 2 – YouTube

https://www.youtube.com/watch?v=TXTqClLuhKM&lc=z222zjb41smlx5fi304t1aokgtewc2uyliuz1zoav2e1rk0h00410

Hi ! This is a Vlog about what I do in my Workshop and when I travel to events near and far. i’m mostly working with my inmoov robot Robyn but I do other thi…

dan replied 7 years, 11 months ago

That’s really cool, keep the Vlogs coming!

Mindless posted an update 7 years, 11 months ago

Some more Mod work on the Forearms,,, The Female Receiver (Hinge /Bolt Section) has been Thickened up a lot to make it as Strong as Possible ( there’s still 3 to 4mm Clearance during Rotation Cycle ) — the Interior has been Gutted-Out so only the Servo Bed Mounts are left ( and the Section where i Stitched to the x2 Parts together),,,

The…[Read more]

Mindless replied 7 years, 11 months ago

Cool,,,, Modding Inmoov is very addictive –,,