Sign in to our website and become an InMoov member. It will allow you to post message, pictures, and share with others InMoov builders. It's just one click away!
Identifiant ou adresse e-mail
Mot de passe
Se souvenir de moi
Le profil de Sylvain et Jeanneton a été mis à jour il y a 9 ans et 10 mois
Le profil de Matheus Macedo a été mis à jour il y a 9 ans et 10 mois
akash dixit a publié une note il y a 9 ans et 10 mois
how can i tag myself in google map that i am making a inmoov in gwalior (m.p , India ) ?
There is a tutorial link next to the map. (Hopefully it still works)
akash dixit a publié une note il y a 9 ans et 11 mois
can i upload my inmoov tutorials on youtube ??
http://www.myrobotlab.org go there and talk in chat ppl can help u
Sure you can, it might help others where you had doubts. Make sure to mention InMoov in the title, this way it will come out with the search.
i have successfully made the figure but now i want to control it with my voice but i can’t able to find out the python script as you shown in this video so please provide me the link of python script of fingure so that i can controll it with my voice
is it this ???
https://github.com/MyRobotLab/pyrobotlab/blob/master/home/hairygael/InMoov3.minimalFingerStarter.py
hello, there is different version of MyRobotLab, therefore there is a script for each worky version uploaded on InMoov site. Version 1.0.107 requires script with InMoov2.minimalFingerStarter.py Version 1.0.1412 requires script with InMoov3minimalFingerStarter.py Both scripts are available…En afficher davantage
Bill a publié une note il y a 9 ans et 11 mois
I was playing with making a temporary battery cover until a good one is published all I did was print out a simple 195mmX115mmx4mm then used a heat gun and my thumb to mold into place . looks bad but hopefully I wont need it long
Ver handy solution! Thanks for sharing
Sylvain et Jeanneton a publié une note il y a 9 ans et 11 mois
Des visiteurs ayant parlé à mon Chatterbot Jeanneton.com d’InMoov j’ai été voir car cela fait un petit moment que je voulais un « corps » pour mon bot parleur. Donc je vais regarder ici ce qui est possible en espérant que ce ne soit pas une foire au fric. Amicalement Sy
En afficher davantage
Salut ! Wahoo Jeanneton va rencontrer Inmoov, c’est une excellente nouvelle. Ton Chatbot est vraiment très évolué. Pas de foire au fric ici. Uniquement des passionnés autour d’un projet open , non commercial. Remercions au passage la démarche de Gaël. Pour la partie chatbot on utilise majoritairement de l’AIML et les projets sont publiés sur Gi…En afficher davantage
Ok, je suis en train de lire les messages, tout en fait. Sinon, Jeanneton est avant tout un chatterbot lyrique c’est pour cela qu’on l’apprécie bcp ou pas du tout. Il, est écrit en CSharp sous windows et au début c’est très facile à coder pour un âne en informatique comme moi. De la le choix de ce langage plutôt que l’aiml. Il utilise aussi…En afficher davantage
Sergey Tvelnev a publié une note il y a 9 ans et 11 mois
Very nice Sergey! Is he all powered up and worky?
Le profil de Olivier a été mis à jour il y a 9 ans et 11 mois
Le profil de Pierrick a été mis à jour il y a 9 ans et 11 mois
Lilly a publié une note il y a 9 ans et 11 mois
This InMoov found a nice and comfortable home apparently. No stress just good company.
thanks you for this compliment 🙂
Drunkbot. NIce
Short circuits are to be expected!! 🙂
Progress on the stomach parts, nice! Is your InMoov already hooked up to be powered?
hello Gael, sorry for this late answer, my Inmoov was not yet hooked up
Hello Lilly and welcome!
Rohmer a publié une note il y a 9 ans et 11 mois
Eloy Viveros Návar a publié une note il y a 9 ans et 11 mois
Comienza un nuevo reto 🙂
Stefan Ekstam a publié une note il y a 9 ans et 11 mois
I realized that the Lenovo Thinkpads were no longer possible to buy new in any Swedish stores. Thanks to eBay I managed to get one from Germany though. After almost bricking it by upgrading to Windows 10 in a nonstandard way, I have not got it working. It\’s time to download MyRobotLab and start printing out the new back parts! 🙂
Hmm, I meant I have *now* got it working. 🙂
Great! For sure bricking the tablet would be a waist… I haven’t tried to upgrade my 2 tablets but since it is working fine under Windows 8, I don’t want to take the risk to brick them.
If you should ever try, and get stuck, I could probably help you out. 🙂 After my adventure with the almost bricked computer, I’m now an expert on the Lenovo Thinkpad 8. I contacted both Lenovo’s local repair agent, and Lenovo’s official technical support when I couldn’t make the computer respond, but none of them could help, interestingly enough.…En afficher davantage
Hans-Jörg a publié une note il y a 9 ans et 11 mois
Hi,
I have two new problems: I installed InMoov3.full.byGael.Langevin.1.py and a Arduino Mega2560 Board at my Raspberry P3 – Now I need digital out Ports to switch my lights with a Remotecontrol iO1.left.pinMode(Portnr,Arduino.OUTPUT) iO1.left.serialWrite(Portnr,Arduino.LOW) do not work (Error)
– I have two Servos for the eyex direction,…En afficher davantage
Sorry, I01.left.digitalWrite(Portnr,Arduino.Low) is the correct syntax.
The Error Message : « ——Traceback (most recent call last): File string, line 285, in moduleAttributeError: org.myrobotlab.service.InMoov object has no attribute left » The same Error with I01.left.PinMode(Portnr,Arduino.Output)
I ordered the nervo Boards and followed the directions to the letter but for some reason the servos are not responding ? I have been working with Arduino for 5 years so I made a jumper from Board Ground to power Ground and Wala Everything started to work I dont know if anybody else had this problem but I would like to hear about it or did I not…En afficher davantage
Hello Bill, I suspect you forgot a welding someplace, because I have two InMoov with Nervo Boards and they work just fine. Hundreds of the Nervo Boards were sold and assembled without this issue. Since you are the first to report such issue, it would be interesting to see more details of your various welding if that is okay with you. Can you post…En afficher davantage
I did find the problem I had all the Servos hooks up backwards lucky I didn’t burn the whole thing up Oops My Fault sorry to bother you
Gee, yeah lucky for you! I did burn some servos when by temporary non attention I miss connected the servos… One need to make mistakes to learn from it (as long you don’t burn yourself or hurt someone) I m glad this is solved!
Mohammad Ali-Karimi a publié une note il y a 9 ans et 11 mois
Hello Dears: I wonder to know any changes happen to create Legs for Inmoov ,to make it walking. Thanks
Hello, At this stage I have gone through many iterations of the legs, you might have seen some of blogs pictures. http://inmoov.fr/legs-second-inmoov-and-other-things/ But to make it walk is still a long way to go…
The pleasure that I met with you and wish i can help the group to complete Inmoov robot.
i have completely made he finger starter so i want to ask will i use this finger setup in future with hand and forarm or not ?
Hi, The Finger Starter is the index of the hand. If you are going to print and assemble the complete hand, you can re-use the index, but personally I like to keep the Finger Starter as a tester. Of course you can also re-use the servo motor and the Arduino Uno board. Though if you are planning to built the complete robot, you will need two Arduino…En afficher davantage
I start to build my InMoov with the head, because it is the best start where you can see a result quickly. I used the modifed head with rasperry pi 3 and arduino uno inside the head, so I have only one cable for the Batterie outside. The Problem: I´m not able to get the USB-Soundcard working with MRL. , so I have no microphone. Yesterday I…En afficher davantage
Hi. Did you set your microphone into Chrome settings? Make sure your mic is correctly selected and not set for the default. I had the similar issue, once the servo’s would be activated, it seemed Chrome was not listening anymore. It’s important the servos can generate a lot of noise. https://www.google.com/chrome/browser/desktop/index.html
By the way, if you use a Raspi3, I think the sound jack can use a jack that does also microphone, like the ear set for smartphone. This way you can test without using the USB 3.0 soundcard, because Linux can be tricky with USB devices.
Raspberry Pi Model B+ 3.5mm Audio/Video Jack
This is a tutorial for to set your Chrome microphone: https://support.discordapp.com/hc/en-us/articles/205093487-How-do-I-enable-my-mic-in-Chrome-
Hi Gael,
thank you for your fast Response!
The Sound-Jack from the Raspi 3 is for Audio/Video Output only! In Chrome under Windows the microphone is enabled and without camera/facedetect all ear.commands works without delay. When I start the ear.command « search humans » the camera starts with 15 frames/second and the eyes move correct, but it…En afficher davantage
Ups, two Arduino-Boards are connected.
Today I made a new Installation from myrobotlab_X64 on WIN10 and it works! I didn´t know why, but opencv works and with facedetect the Programm needs 67% off the CPU Power only (4×3,5GHz).
Good news, just to make sure, before restarting MRL, you need to kill all the java and javaw process in task manager. In my ZIP folder I have added a .batch file which will kill all these process for you at once. Face tracking is a CPU eater with the recent version of OpenCV. I do not know why, but with the older version of MRL, 1.0.107, OpenCV…En afficher davantage
the second positiv message, myrobotlab.1.0.1412 (32Bit) and the Raspberry Pi3 works too!. I get 5 up to 6 fps with facedetect with 65% Power of the CPU. I start the WebGui on a second PC with Microphone.
Thanks for your Time!
Great, I’m glad this is now working!
Fernando a publié une note il y a 9 ans et 11 mois
Nice hat, is your InMoov living in a sunny environment?
Good , in Spain we always have plenty of sunshine 🙂
Le profil de Geek Street Solutions a été mis à jour il y a 9 ans et 11 mois
lorn campbell a publié une note il y a 9 ans et 11 mois
I have bought Wanhao i3 V2 printer and have started to print the hand and wrist parts. Using PLA to print with. I will add pictures soon. Built the starter finger and got that to work with myrobotlab software but no luck with voice control yet, although it chats away and hears me OK.!
Let us know how that goes, and feel free to explain your issue with the sound commands of MyRobotLab.
Hi Gael, great to talk to you. I am still printing the hand and forearm and will look at the software again later. All going well! Quick question – where is a cheap place to buy the extension springs for the hand tensioner? Can only find 20mm long not 10mm long. Also is that the spring length only or total length? all the best, Lorn…En afficher davantage
Hi lorn, I actually bought my set on ebay: http://www.ebay.fr/itm/Springs-Set-Extension-Tension-Compression-Extended-Compressed-200pc-AST23-/141720111201?hash=item20ff2d4861
pedro a publié une note il y a 9 ans et 11 mois
http://stackoverflow.com/questions/16380394/getting-battery-capacity-windows-with-python
im using linux so dooing a script will not help u, try see this post
upower -i $(upower -e | grep BAT) | grep –color=never -E ‘state|to\ full|to\ empty|percentage’ if u do this on cmd u will get what u want but couldnt link that yet to the purpose u want, dont know if this can help
ok just uploaded my gestures, in git from pyrobotlab, go check the one called battery! enjoy
i still cant understand git very well so the correct file is in scripts/zorba/gestures/battery.py
Thanks Pedro, I added the « battery gesture », and modified my gesture .aiml as well to get it in account. But I get this error: IOError: (2, ‘No such file or directory’, ‘/sys/class/power_supply/BAT0/energy_now’) So I suspect « energy_now » is in a different directory than yours.
upower -i /org/freedesktop/UPower/devices/battery_BAT0 if u run this on cmd does it work? try use this path, or do a search for BAT0! Btw, change to linux! You will be surprise how much easy it is than windows
Thanks Pedro, linux upower software won’t work with Windows (as far as I know). I am searching on the net to use powercfg -energy and powercfg -battery.
I have been using Linux for years, it is one of the reasons I opened my design. Even though, I love Linux, there is still many things that need to be fixed for to have a simple OS working.…En afficher davantage
you are right, and is mooving to know why you choose windows, i all my life used windows but when started with linux have fall in love! I guess the script i put on git will still work if u know the correct path, can u try do search for BAT0 and see if the pc find it, if i can i will try test it n a windows laptop and see how can u configure it! Best luck
Matt Davis a publié une note il y a 9 ans et 11 mois
this months Inmoov update
Very cool Davis! Can’t wait to see the head mounted on the torso.
im sorry for the very bad filming, maybe someone is interested in send sms from your phone just by talking to inmoov
and im sorry be in portuguese, im basically sending a test message
and using MRL myrobotlab.org
Very nice! I was wondering how to modify my aiml to read the battery level of the pc running InMoov, any idea?
That should not be very hard, just a python to read the value and execute a mouth.speach with the value in the same python. I can try check when have time! I’m also sending emails and browsing net with inmoov, and setting events on google calendar
But where should the python grab the value, that is where I am a bit stuck. Great progress with your aiml files! Did you check the aiml’s of Anthony (moz4r)? He also can load pictures on to the screen at request of the user and share data with other InMoov robots.
i have see some things of him yes! Python is a very powerfull tool and very easy to use, i will try to find what u need, my vacations ended so i dont have so much time but if i have time i will do it
Markus a publié une note il y a 9 ans et 11 mois
Robyn Inmoov practice accuracy
Very interesting Markus, I’m surprised how well the mini joysticks + remote are reliable to control the arms and hands.
Yes it works really good ! i need to practice a lot