Sign in to our website and become an InMoov member. It will allow you to post message, pictures, and share with others InMoov builders. It's just one click away!
Identifiant ou adresse e-mail
Mot de passe
Se souvenir de moi
Mats Önnerby a publié une note il y a 10 ans et 4 mois
I’m almost finished with the mechanical build and the testing of each servo individally. Next step is to purchase / build and install all the electronics and batteries. The back is still a bit empty.
Super cool !! Your choice of colors remind me of Leonardo’ super hero: http://inmoov.fr/members/leonardo/album/ How is the Raspi doing for post processing video tracking on MyRobotLab? I will post the Back Parts soon…
You should post your pictures in your album, you might get featured on the side page.
I get about 2 FPS when doing facetracking. That is good enough, however I also get 5 seconds latency, and that a bit to much. I have tried using the camera outside MRL and I get good results from the camera. I can stream at about 30 fps about .2 s latency. That is good. I had a problem that took me some time to figure out. The java runtime that…En afficher davantage
I would love to have this on my desk, I only have a head so far, and that’s controlled by LEGO
I also realised some time ago that using the latest version of MRL which uses OpenCV 3.0 that I would get a low fps result. I was recently mentionning that to Grog and he said he would digg into it. So, using the Lenovo tablet touchpad with the version 1.0.107 gets me with a a fps of approximately 30. Using the version 1.0.954, gets me to a 7/10 fps.
Le profil de Patuko! a été mis à jour il y a 10 ans et 4 mois
Alain a publié une note il y a 10 ans et 4 mois
For information, i\’va put an arduino nano in the head to take care of the face animation, actually, i have \’normal mode\’, shown in picture, \’terminator mode\’ (red with round eyes), \’ironman mode\’ (iron man mimic), and \’cylon mode\’ (see galactica)… I will try to make some pictures of other mode and send them also…
Hello Alain, Very nice! Did you try hooking your Arduino to MyRobotLab? You could voice speak to command each face animation. Doesn’t comment reply work for you? I see you post new post after each other. Let us know if you have problems with the site community buttons.
Gael, is there another way than an URL for sending videos?
Hello, The site cannot store videos, only pictures, that is why you need to use URL.
Nice! but you are losing the cameras?
Cute! @Jean, actually cameras could be added behind the grill.
Ah nice with the torso! Hey is that a face protection? Are you building an anti strike police robot?
Hello, here are some picture of my face change, i wanted to animate the face with less behind a grid, to have more freedom about the type of animation that could be possible. Here is the actual result…
Awesome! This is nice to create facial expressions! I’m a bit sorry to see InMoov’s face is gone though, I had been sculpting the face during my whole summer vacation… Anyway, i would love to see a video with various animations and expressions if you already have the code for it. What software do you use or plan to use?
Oh I had similar thoughts about doing something like this and LEGO, looks awesome
Jack Phillips a publié une note il y a 10 ans et 4 mois
Back to work on InMoov after dealing with a bout of Prostate Cancer. Using EZ-Robots for now. I have a lot of controller here so want to use up.
Hello Jack, Sorry to hear about your cancer and very glad to hear you are back on your feet! Bonne Année et Bonne Santé! Keep us updated with your progress.
Nice to see you are back at it. I hope all is well. I’ve seen your progress on EZ Robots forum. Don’t be afraid to post questions here or there if you have any. I am wondering what your plans are for the 2 cameras you have in your InMoov.
Hi Bob, Thanks for the thoughts. Using 2 cameras in head but only one active now. Try to move platform top mobile self contained. I tried answering you via email last week but I guess I need to use forum to answer now. Are you the Bob in South NJ? Your project is fantastic! Keep in touch.!
Hi Jack, I am the Bob from Canada, we talked about a year ago( at least) email me anytime at houston5913@hotmail.com
Hi Gael, Thanks for the thoughts! Working through treatments and will be stuck at home for several months. I intend to make my InMoov self contained mobile unit when done.
Another subject! A word of warning to everyone… Get your PSA blood level checked and don’t let doctors jerk you around! I did not monitor close enough and hopefully I will…En afficher davantage
Le profil de Vincent Grimeau a été mis à jour il y a 10 ans et 4 mois
amby a publié une note il y a 10 ans et 4 mois
hello you can see my video about my easy plateform here you can see battery removable easy when it is discharge change by a new
Nice idea with the rechargeable batteries. What kind of motors are you using?
Very nice Amby! It seems to have good speed with those electric car motors. I really like your battery idea,! If I wouldn’t fly the globe with my InMoov robot, I would go for your solution! Unfortunately we may not carry batteries like that in planes. The very common 6VAh batteries can be bought almost in every country, so when I arrive in a…En afficher davantage
Fantastic Amby, Whaoo two motors and two batteries !, you are ready for the InMoov Racing 🙂
@ bob hello i use a toy moto like this http://www.cdiscount.com/juniors/plein-air/tendance-design-mini-quad-electrique-enfant-rose/f-120044204-tendb05brose.html
i find 2 in trash so i take motor for free battery change easy when the battery is empty
@ gael hello gael is very fast this motor for robot but i can drive slowly yes this plateform is…En afficher davantage
Gael Langevin a publié une note il y a 10 ans et 4 mois
Small video to explanation the driving system of my plateform and the locking mecanism for to be able to push InMoov by hand while driving direction with the remote. I\’m in the process to make a very small remote transmitter which could be held within the palm.
Thanks Gael, now I see how it all works. I like how you can detach the drive wheel to push it around manually. See my comments on Sebastiens’s post.
@Bob, to answer your previous questions on Sebastien’s post: The base can carry InMoov easily. You can add at least 10kg and the base can still ride fine as long as the floor is flat. When I use InMoov in the street, the wheels can overcome some holes if it rides full speed. If you look at my video, you can see a battery carrier between the two…En afficher davantage
SwanRobotics.com a publié une note il y a 10 ans et 4 mois
A PIR module added to my inMoov robot.
Always clean!! Thanks for posting your progress, I saw you’ve made a video as well. Your Nervo Board is also nicely assembled! Your InMoov is going to look awesome!
Thank you. I have made a video indeed. I want to film the rest of the assembly also. I hope it helps others.
Very good, I like that!
Sebastien a publié une note il y a 10 ans et 4 mois
Airwin InMoov driven with a wireless PS2 gamepad
I like your drive system. Can you share some details about the components you used to build it – motors, servos?
Thank you Bob, this InMoov plateform is widely inspired from the one Gael made. My components are coming from old broken stuff to make it low cost as it is a temporary solution waiting for legs :-).
The arduino uno that manage the inmoov neopixel ring is now also used to read commands coming from a wireless PS2 Gamepad ( thanks to Bill Porter…En afficher davantage
i like your choice color in your inmoov!!!
Thank You 🙂
Awesome, now we can go racing!! Thanks for all the links. I am still using a huge Transmitter gracefully given by Alessandro during the Paris Makerfaire, but I really want to build something much smaller which could transmit directly to the receiver. Having two functionality for the mobile plateform is super handy when you travel with…En afficher davantage
Sebastien and Gael, Thanks for sharing the details on your bases. They are very simple and efficient. How much weight can the base carry/move around. Gael, yes, EZ Robot can do the voice controls as well. I can run my drive motors with Voice command, or manually on the computer or mobile app. I’m looking at building a lighter base like this but…En afficher davantage
@Bob, I replied to your questions on the thread in which I posted the video with the base.
Stefan Ekstam a publié une note il y a 10 ans et 4 mois
I had to wait forever for my Chinese fishing line to arrive, but once it arrived I got going again. Now the left arm, hand and bicep are finished, except for the fingertips. Everything works as it should with the Arduino.
Unfortunately my 3D printer has been destroyed in a fire, so there might be some time until I can continue with this project.…En afficher davantage
Beautiful! It is a shame and sad to hear about your printer. I hope you got an insurance or some options to get a new printer. May 2016 help you for that!!
hello everybody i build a plateform for inmoov it is a very easy plateform very cheaper it is my first prototype in card board so if some people are interested i can send you plans amby
Nice work! It is amazing what you do with cardboard ! Can you share some information about the motors you used?
Amby the King of Cardboard! As I commented on your post on MyRobotLab, you could make Thingy on Thingiverse with the DXF and all informations of the motors, wheels and sources. Some builders could reproduce it in PVC or plexiglas.
hello gael yes of course a can give everybody plans for built it this plateform very cheap but in first i builf in cardboard for prototype and when all is ok i give plans and informations i design a connectors for wheels and motor so i use a motorcycle for children find in trash a small bicycle children find in trash and i use a batterie for drill…En afficher davantage
I love to see videos!!
dotnetmobile a publié une note il y a 10 ans et 4 mois
Hi everybody, I joined the community hoping to enjoy and have fun! I have a 3D printing & Arduino pedigree and I am looking forwards starting working on InMoov.
Alright, welcome to InMoov then! Looking forward to see your built!
Ronald a publié une note il y a 10 ans et 4 mois
Hello everybody, after printing a first look if everything fits. Next step, the pully and gears. Things are starting to come together.
Great Ronald! It is very wise, as you say, to see if everything fits before printing more parts. Thanks for posting.
Marcel Gevart a publié une note il y a 10 ans et 4 mois
This saturday, the head and eyes system are ready to go… With my assistant, my younger boy, Jason Gevart
WOW! That’s a nice looking build.
Thanks Bob 🙂
Progress, progress!!!
First of all, 4 weeks of printing in ABS with my M-200 ZORTRAX
Awesome!! This is cool, You must start to see the light in the tunnel!! Nice workshop, I see you have a couple of old collectors Macintosh. Thanks for posting more pictures!
Thanks Gael. Yes I own old Apple 2 c, Apple Macintosh, all the line of old Atari computer(400,800, 520,1024, …..), the line of TRS-80 (Model 2 to model 4)…
Tell me Gael. I am looking for speakers like you use. Have you any reference or brand ? thanks in advance.
Le profil de Alexey Parfenov a été mis à jour il y a 10 ans et 4 mois
Tody I have finished the assembly between the « top Stomac » and the « middle stomac ». The torso is also finished.
Hey cool, you are also printing the Mid and Low Stomach parts! I hope the tutorial is explicit enough, specially about the servo connections. You have assembled the Nervo Board, are you happy with it?
Hello Gael. Thanks for compliment. The nervo Not Yet but the circuit and diagram look fine. For the servos no problem to understand, but for the shoulder, the servo system doesn’t work fine. The contact between the worm and the gear is too hard for the servo. I’ll try to print again with 0.9 resolution….
Le profil de Eric Baumel a été mis à jour il y a 10 ans et 4 mois
Eric Baumel a publié une note il y a 10 ans et 4 mois
Ahaha, awesome! The eyes next to the face makes it a little freaky! Was the cap okay in the package? I’m always a little worried with transport that is why I ship it in a cardboard box.
The cap and NeuroBoard all arrived in fine condition. Gael, thank you so much for your amazing work!
Grant a publié une note il y a 10 ans et 4 mois
Hello everybody. I haven\’t been on in a while, 8th grade got a lot harder, but I am happy to say that I am almost done printing all of the pieces to the right arm. I am just waiting for Amazon to stock back up on HK15298B servos. I will share my results as soon as I am done assembling the full arm. Good luck to you all, Grant
Fantastic! Keep us updated when you receive your servos.
Le profil de Dennis a été mis à jour il y a 10 ans et 4 mois
Richard Palmer a publié une note il y a 10 ans et 5 mois
Hi all, I am part way through printing the hands, but I cant find much info on the second servo for the thumb. Can anybody tell where I find information on this?
Thanks Richard
Hello Richard, There isn’t much info on that, most information you will find are directly on the Thingiverse. I haven’t seen many hands printed with the extra DOF for the thumb. http://www.thingiverse.com/thing:28124 Hopefully, somebody will come here to help you on that here.
Hi Gael Thank you for your help, I will look at the link and decide what way to go .
Regards Richard
mustafa aydın a publié une note il y a 10 ans et 5 mois
Iam from Turkey, ı havent left hand and ı use myo hand prosthesis . my prosthesis little and not like my orijinal hand. ı have under 6-7 cm elbow and prostesis to the wrist and ı limb gloves. ı want immoov hand. ı want ask what is weight ? because weight is important for me. my ampute short. and is inmoov hand strong? thanks.
Hello Mustafa, The InMoov hand version1 is rather light, but the servos are set in the forarm which is not always usefull for prosthetic purpose. Depending on the material you will use to print the fingers it can add resistance. Carbon 3D printing is the strongest I have seen for now regarding weight and strength. InMoov hand version2 is not ready…En afficher davantage
Gael Langevin a publié une note il y a 10 ans et 5 mois
Using MyRobotLab and creating a special control GUI with sliders. This might be using MaVo\’s GestureCreator in the background.
Students at IES Vegas assembling the eye mecanism on InMoov\’s face.
It is nice to see young people working on things like this.
Bob Houston a publié une note il y a 10 ans et 5 mois
A demo of the stomach rotation
Hi Bob
Very cool movements .
As you have done to make the system of wrist motion up and down ?
Ah cool! Finaly you can post videos again! I see you replaced one hand with the Flexi hand?
Nice video, Bob! I see the wrist also has a movement linkage. You might want to share your work with Juerg, as he is also working on something similar.
Yes, I hacked a flexihand and put the servos for the fingers in the palm of the hand and added a servo for the additional wrist movement. I have also just finished adding flexible joints to the original InMoov hand and it works pretty good and can hold objects fairly well. I posted a couple of videos on Youtube about the flexihand.
RIght, you take a new route with servos inside the hand – very nice! My bending wrist uses another servo in the forearm and a few modifications on the existing wrist and hand parts – and it integrates a position sensor to allow the hand to stay horizontal. I am waiting for some cabling stuff as I want to have the forearm pluggable to the elbow.…En afficher davantage
Looks great! The flexihand seems better controlled – is that due to a design improvement in the parts or just better tuning during installation? PS I think we should chip in to buy you some switchplate covers so you can program your bot to install them 🙂
Jeffrey a publié une note il y a 10 ans et 5 mois
@admin Hi! I saw this http://www.thingiverse.com/thing:118031 but I only see the fingers, can you say me where are the other parts? is urgent! thanks!
The other parts are not released because I’m working on them. I released the finger to help prosthetic projects as long at is not for a commercial purpose.
Beagle a publié une note il y a 10 ans et 5 mois
Hey, just noticed that a \ »Bob\ » can\’t post pictures, do we have a cross over account thing happening?
This was a different issue. Bob can now post pictures.
This is a bit weird, when I login as beagle and access the map to put in my location, it says that I can edit \ »Slade2000 aka Bobby\ », that\’s not me? also it is using my friends email account(jock undies), I have never changed this and may be some default error? any ideas?
There is definitely a bug… We are trying to figure what is the problem. Updates with pluggins are a nightmare, it’s a constant maintenance, that eat our time.
Woo Hoo, I’m in, been having issues with logging in due to my PC’s connection, It’s been a long hall of about 5 months since first starting this project in the form of purchasing a Prusa Mendel I3 kit and building it, only to find many parts missing which I sourced locally after tossing the instructions over my shoulder, unfortunately, in the…En afficher davantage
Well, I started the project designing a prosthetic hand, it slowly turns to be a robot. So, I say, start with whatever makes you excited and keep up progressing!
Hi, testing to see if I can post a picture here.
Yes Seem to work! this bug make me crazy, just need to remove the test seb pseudo 😉
You and me both !!!!
and thanks a lot for working on it and figuring it out.
Cool, at last it seems to be resolving!!
I had a lot of trouble logging into this page, today, but it seems to be working now….I hope.
Oh man, what was the trouble? Can you describe?
It took awhile for my login to register on this page. I was logged in instantly on the other pages. Sorry, false alarm.
beautiful!!!