Mes amis – Activités – amby

Perry a publié une note il y a 9 ans et 2 mois

Westworld maze insert for my inmoov.

Mindless a publié une note il y a 9 ans et 2 mois

Just Uploaded the Modded Elbow Joint to Thingiverse- (two types)
Servo Tray and Tension bed will be online in a couple of hours- just panel beating work on the servo tray and tension bed- prints clean and joins together in one piece not two– extra screw/bolt holes- and there is a 2piece version too..

Mindless a publié une note il y a 9 ans et 2 mois

Erick Daniel Galindo Garcia a publié une note il y a 9 ans et 2 mois

Hello everyone. I told them that in early September I started on this project called Inmoov and I was building the robot for a couple of months. I already have it printed to the waist I still have to mount the servomotors and print the chest and back but I can not hold my will and I decided to start designing my own legs because I was doing…En afficher davantage

Mindless replied il y a 9 ans et 2 mois

Very nice system,,,,, the design reminds me of that Japanese robot they finally got walking around,,,, Mr Gael has the legs designed but not released and he’s kept that organic look to them which very hard to copy- but getting the walking operation with the toque vs speed to work without him falling over is going to be a hell of a c…En afficher davantage

Mindless a publié une note il y a 9 ans et 3 mois

Hello Mr Gael, Guys and Girls-
I see the guys over at -Myrobotlab- have got the Electric Motor with H-Bridge and PID working to the point where it’s a real alternative method of powering the mechanical movements of Inmoov,,,
So I assume this mean a cheap and nasty servo that is prone to “Burning-Out” can be modified so it keeps its Gear train…En afficher davantage

anthony a publié une note il y a 9 ans et 3 mois

Rachel & Marty, I hope they can understand themself soon 🙂

Rohmer a publié une note il y a 9 ans et 3 mois

Pour ceux qui veulent un oeil en verre, vous découper à la scie diamantée une lampe radio.

amby replied il y a 9 ans et 2 mois

tres bonne idee merci d avoir partagé

juerg a publié une note il y a 9 ans et 3 mois

A moveable base and a planned escalator for Marvin. Don’t want to drive around with Marvin in scary heights.

Mindless a publié une note il y a 9 ans et 3 mois

2pc Forearm- 100% Infill- PLA

juerg a publié une note il y a 9 ans et 3 mois

Tried to win a bike in a foto competition but it looks like they had no robot in the jury 🙁

Perry a publié une note il y a 9 ans et 3 mois

There was a surprise party when I got home from work!

Hans-Jörg replied il y a 9 ans et 3 mois

Hi Perry,

he looks sad, he needs a girlfriend. 🙂

Hans-Jörg a publié une note il y a 9 ans et 3 mois

Hi Gael,

the ball-bearing rotcenter is online, the pivcenter follows in a few days.
http://www.thingiverse.com/thing:1876443

regards Hansi

Perry replied il y a 9 ans et 3 mois

Where do you get the ball bearings? I like your work. For myself I like the idea of no ball bearings though. That is just my preference. I like that this can mostly be printed without a lot of extra parts to buy. Even if a ball bearing installation is much more efficient. You’ve done nice work though.
- Hans-Jörg replied il y a 9 ans et 3 mois
  
  Hi Perry,
  
  I like the idea of no ball bearings too, but as I began with my InMoov there was one problem, the circle holes are not realy round and the move of my head not realy even. You need a big Servo with a lot Power to move it.
  With the Arms it is the same, a lot of Power from the Servo is used to move the wormgear. With the ball-bearing I…En afficher davantage
  - Richard R replied il y a 9 ans et 3 mois
    
    Brilliant… Love this setup. I am using much stronger servos than the 805bbs too so this is something I would like to use. I also have been experimenting with a new low temp Poly carbonate so now my PivCenter, worm and Piv Gears are incredibly strong as well… Nice… thanks
    - Mindless replied il y a 9 ans et 3 mois
      
      Hi Hans
      So are these the correct sizes in mm-
      689 bearing is -9mm x 17mm x 5mm
      61709 bearing is-45mm x 55mm x 6mm
      
      I just done a quick search with the bearing Numbers you gave and this size keeps showing up -just like to double check before parting with any money- plus i might some in the bearing bin back on the farm-
      Nice work on the Mod,…En afficher davantage
      - Hans-Jörg replied il y a 9 ans et 3 mois
        
        Hi Mindless,
        
        yes, that are the correct size of the ball-bearings.
Hans-Jörg replied il y a 9 ans et 3 mois

I found a reseller, where you can buy a Set of ball-bearings ( 2 x 61709-2RS and 1x 689-2RS ) for 10€ incl. shipping to Germany ask me for contact.
- Mindless replied il y a 9 ans et 3 mois
  
  I already brought x4-61709- for $26au from china- about 15min after we last spoke,,,, i can get the 689 for $5each in australia,, but thats good to know that you found a seller, im sure there there will be plenty of people looking for them- printing out your mod right now- will post a pic on your Thingiveres account when finished–
Hans-Jörg replied il y a 9 ans et 3 mois

The Piv-center is ready for download.

Hans-Jörg a publié une note il y a 9 ans et 3 mois

coming soon

amby replied il y a 9 ans et 2 mois

your print is perfect wouaaa

Mindless a publié une note il y a 9 ans et 3 mois

This is a pic of the -Push on /Push off – Finger Tips that I could load with the last post,

Mindless a publié une note il y a 9 ans et 3 mois

Hi Guys, I’ve got my- EyeglassV2- “and” EyeSupportV4- Just about ready to be released- it will do away with having to glue the holder in place because it is now printed with the -EyeglassV2-
All key mechanical movement remains in tacked- the EyeSupportV4 has had a lot of little changes made to it that you won’t even notice (servo mounts /wall t…En afficher davantage

Mindless a publié une note il y a 9 ans et 3 mois