Very good job Markus!! Scary when InMoov lean sideway, I felt it was going to fall, ahaha.

Totaly effective. Grog suggested to get the opening of the jaw bigger according to the level of sound using software, that would be good too.

Great work!!

I know, it is a real pain. But I’m not able to fix it, only Leonardo could because I have no idea how to solve this. It is the « post » button that disappears.

Ahaha! I love it. When Robyn InMoov decides it’s party time, it’s intense in your home!!

Well the enclosure makes a huge difference. That is for sure.
My printer is also continuously closed, with no fan inside besides for cooling the extruder itself.

I love when it is fully DIY , it is so much in opposition to the « SO » technical approach of a 3D printer.

Great progress! I’m wondering why the arm suddenly falls down… Did you get a broken tooth on your gear shoulder?

Very nice Markus! Using a wide screen is good, I have chosen a much smaller screen to be mounted on the Odroid U3 and it is a bit hard to read on it.
Very interesting way of connecting the arms, I like the hdmi cables. What power supply do you use for the servos, Others might be interested about that.
Thanks for this instructive video!!!

Very beautiful design. We would like the photos with comments. You come up with the usage HDMI cable very nice.

top stomach

Great! have you been able to set it as default positions following the recommendations I posted recently on the tutorial? It looks like it !
One question, you haven’t printed the bicep covers, is it because you like it this way?
Just to say, the bicep covers, once glued to the structure really helps reinforcing. It greatly helps avoiding…En afficher davantage

Wow cool !!
The big screen in the background is nice for to work. Are you using MyRobotLab to do the visual tracking?

CYS model S8218
XQ-S4020D
Did both servos fit without modifications? Some builders are having trouble ordering my recommended servos.

so the problem with the right hand is fixt the servo now is in the right position but the problem with the rigt sholder neutral position need a bit time, make a new holder for a rectangular pot

You can use the settings with a script, see the settings for the hand
Here is a minimal script:
https://github.com/MyRobotLab/pyrobotlab/commit/9eb96ed1d094b23f5bfbce843251f81d225b3e8b#diff-76
Here is my full script:
https://github.com/MyRobotLab/pyrobotlab/commit/9eb96ed1d094b23f5bfbce843251f81d225b3e8b#diff-70

i killed the jaw servo in my first test but i replaced it in this video

What servo did you use for the jaw? I have burned a few of them, MG995, MG946R, MG996R… The torque needed to action the jaw, and the movement repetition cause great stress on the servo. Bob Houston has been using a HS-311 servo since he started his built and says he never had to replace it.
Might be worth trying.

Super! are you using the Neo Pixel Ring I use or is it done with color leds? If you use the Neo Pixel Ring, is it hooked to an extra Arduino or is it implemented within the two InMoov Arduinos?

Woo ooo, great idea! now InMoov can be made for domotic purpose.

Fantastic, iy’s building good!

very nice extra features for the Rock Paper Scissors play game. It is interesting how it seems like he really can understand what you are playing. For someone who doesn’t know, it can be very tricky.

Woo oo, big head !
I talked again with the guys from Seed and we should get it started, but I prefer not to say when because I don’t want to disapoint anyone about timing. It was supposed to be on sale for beginning september…

Did you finally understand how to use the potentiometers outside the servos or are you still struggling with that?

Very nice and clean wiring. What type of servos are you using?

Thanks for the link to the article. You do have a nice color mixture on your InMoov.

Answer to MErne about elbowgears

http://www.inmoov.fr/wp-content/uploads/bpfb/257_0-28949800-1413072299_img_20141012_095846-bpfbt.jpg

sorry « with coverfingers »

Ehehe, cool pir detection and tracking, I’m wondering how you set your pir script to auto go on face tracking, I can’t even make him say « I was sleeping ».
Your video makes me laugh because when I wrote the script for « nice! You’re damn right », I thought it was going to be funny when other robots would say it. And now it happens.
Thanks to your…En afficher davantage

Good progress, I checked your assembly on the pictures, and all seems to be correctly mounted. Many people mount the neck the wrong way

The two large holes were used, during my designing to check if the shoulder was correctly placed when returning after a lift up.

Getting better and better!

nice machine

pictures, we want pictures.

Welcome to InMoov Nation

Interesting color combination. Did you come to the Geek PIcnic? Have we meet?

Any event is good, right? I saw the video on youtube with the music!

Nice! you will need to add the palm hand covers to make sure the ring and pinky finger don’t fall downward like in your video.
See link bellow:
http://inmoov.blogspot.fr/2012/08/this-will-help-i-am-sure-about-it-there.html

And another one in mother nature!! Well done Markus!

Hi Jhack, nice! Thanks for posting. no problem encountered during the assembly of parts?

Hey this is cool scripts!! Good job Markus
I have been using your random scripts within my InMoov2.full3 script

I can’t imagine how much time this has taken to prepare. Thanks for posting. I like the idea to bring humor in your presentation!

Cool Markus, did you make the script available in
https://code.google.com/p/myrobotlab/source/browse/trunk/myrobotlab/src/resource/Python/examples/?r=2014

Nice video. What program are you using to interact with InMoov?

I got your reply, not sure if you got mine. I sure would be interested in being able to do that. Can you post or send me a sample of the script you use?

Very nice setup for a mini MakerFaire. I can see you got yourself some T-Shirt done. Robyn keeps his hat at all time!

Ahaha, this one is really great! Robyn InMoov feels cool being in the car.

Very complete Alexander, thanks for posting. Did you try out using kinect gestures?

Interesting way of hooking up the tendons to the servo horns. Is it to make it easier for adjusting?

In this experiment, I used the Jhack’s approach for implementing feelings. However, the using of springs and 90 degrees servos reduced range of fingers motion. Then I used the blocks to increase the stroke finger tendons.

Ehehe, very nice! InMoov in Stockholm! We want pics!

See, that’s why we need a male voice!! He wouldn’t give the gears for leaving your socks laying around but then you probably wouldn’t get him to vacuum!! Great video!!!!!

Great video. Please do share the script on this one.

Have you already tried this ? If so, what kind of spring do you use, and where to buy it ? 🙂 (ok, I’m lazy 😉 )

I’m not really into site programming but when you go to activity the bar on the right is not needed any more. if this is removed you might have more room for the videos.

for the comments, Im looking almost every day to see what others are making.
the comments are sometimes low but I think lots of people are watching.

I also found it a bit difficult to navigate the site. I just kept punching around until it functions as it should.
I would also agree with dumping the update stream on the right side but leave the members activity button.

I have found that by using « copy and paste » into the text box is the easiest way to post You Tube videos. It is unfortunate that they are cut in half but by clicking on the name of who posted it, it takes you to the video. I too think that a lot of people look at the site but everyone leaves comments. I know I don’t comment on everything but I…En afficher davantage

looks great!!!

Finally pooring some drinks for humans. Soon will be time to sit back and wait for the drink to be served.

very cool

Great! This one really made me laugh! Thanks for sharing the scripts!

Ahaha, shooting Markus with the eyes!

Thanks for posting!
This is our first know Russian InMoov.

Great! A proud Markus! Could you send me a copy of the magazine? I would like to keep that in my archives.

Ahaha, Thanks a lot. At first I thought it was going to be a video.
Merry Christmas to you and your Family.

Fantastic, a hundred kids! Think of it, the first 3D printed robot these kids have ever seen, and you were the one to show them. Congratulations.

Aaah, I had been wanting to do that for a long time! Because the cables sometimes get stucked and if they run in the rotation center it is more logic and simple. I have added your Thingy to the Derivatives collection in Download tab.

I’m glad you like it 🙂

hahahah … very good !

sensational! Very friendly, 🙂

Very good! I think, from what I can see, it was huge for a mini MakerFaire, It seems like there things to see everywhere. From what I have read on the net it was a great success.

Wow! Great job! The glowing light on the chest is cool, and I like the fact you amplified it’s voice for people to hear what he says. During my shows, I always have a headphone and nobody knows how InMoov talks. Have you been able to do voice commands also? I can see someone on the left corner with the InMoov T-shirt 🙂

I hope you really enjoyed yourself during this event.

hi Gael, i was using voice commands to triger the speeches and other gestures, it was a fun day even thought i only go about 20min to have a look around.

the person in the video is my farther inlaw, looking after my 3d printer and explaning how they work to people.

Ha ha! fun to play around with.

InMoov’s first signature! Fantastic!

Very nice! Do you plan to print the other arm? When I run my InMoov with only one arm attached to the torso, I find it very unbalanced. The pressure applied on the whole structure is more heavy, it’s logic. Have you been able to use voice commands with MyRobotLab?

Yes i have just start printing the other arm..At the moment i am using a SSC-32 servo controller so i have not tried ardoino or my robbotlab. I am going to download and test it later.I have bin learning a little bit of pic processors and programming them . I have made simple circuit boards in other projects.

but i have never used ardoino before so i am excited to learn more.about it.

Hello! And thanks for welcoming me. I started my inmoov approximate 2 month ago

Great! I had to twist my neck a bit to look at your picture. 🙂 Now we need to get it working.

hahahah …

Cool Shirts, did you make two for you or do have a partner along?

i got 6 done as i have my wife, my one year old girl, mother inlaw, father inlaw and a friend going to support me.

Ahaha, I love that!

yeee

You received the Kinect, that is cool!

Fantastic Jhack! Hope you have a great time.

A whole arm ready!! Great.

Nice work! Is the coqated steel nylon doing a good job, doesn’t it strech? I ave never used that but it seems interesting.

Oh I see you have mounted the the hand on the wrong side of the wrist. Nothing bad technicaly, it is only for the eyes, I then feel like the hand isn’t correctly aligned with the forarm.

Cool, two InMoov and also the head printed by Alessandro. I really enjoyed these days!

This is so great.

Nice and clean set up, Leonardo.

Thanks