Friends – Activity – dcochran

Simon posted an update 8 years, 2 months ago

Inmoov, Robit has lights
Simon posted an update 8 years, 9 months ago

Downloading Inmoov files
When you click on download all files , it download all file but they are not the same version as listed under parts
- buildstoys replied 8 years, 9 months ago
  
  Yes Gael has mentioned before that he needs to go through and update the zip files. For now download each file individually, as they are usually the latest ones.
- Simon replied 8 years, 9 months ago
  
  Good to know, just wasn’t sure if anyone was aware of it thank you
Simon posted an update 8 years, 9 months ago

Gael, the reason am asking how tall Inmoov is so I build a new mobile base, my first Inmoov was 6 feet tall. Is it ok to make the over all leight 5.4 feet?

Cheers
Simon posted an update 8 years, 9 months ago

Hello Gael,
How tall is your Inmoov when mounted with your legs?

Thank you
Simon posted an update 8 years, 10 months ago

I was trying to open the shoulders and torso page from build yours site and got the 404 error
Simon posted an update 8 years, 10 months ago

I was trying to open shoulder and torso from the build yours site and I received this..
- Sebastien replied 8 years, 10 months ago
  
  Thank you for reporting this bug, should be fix now.
- Simon replied 8 years, 10 months ago
  
  Thank you Sebastian. It is working now.
Simon's profile was updated 8 years, 10 months ago
Alex posted an update 8 years, 10 months ago

Inmoov. New vision.
Alex posted an update 8 years, 10 months ago

Inmoov. reincarnation.
Simon posted an update 8 years, 12 months ago

Video

YouTube

https://www.youtube.com/watch?v=twudDHz-ILQ&feature=youtu.be

Chargement…
Simon posted an update 8 years, 12 months ago

Just sharing my led finger tip sensors. I plan to use an IR sensor in the hand to detect objects.
- juerg replied 8 years, 11 months ago
  
  you might have better sources for IR sensors – my own experiments and results are rather poor. Another issue might be integrating the sensors result into the control loop. I think without an optical identification of the part you want to grab you won’t be able to gain much. Another issue is the current joint angels of your finger parts. These…[Read more]
Simon posted an update 9 years ago

I am trying to find out if many people are using Gael\’s finger tip sensors on their InMoov\’s. Is there really any benefits of having the sensors on the finger tips.
Thanks,
Mike
- Mindless replied 9 years ago
  
  Depends on if your happy with fingers that can move buts that all they can do,,, the sensors allow the fingers to realise when the have touch an object and stop the servos from moving any further,, this allows Inmoov to pick up objects that have different sizes/shapes,,- now this all done with the software,,, so this is where the guys over at…[Read more]
Alex posted an update 10 years, 6 months ago

City Blagoveshchensk. Space Festival for young engineers in Russia. Cosmodrome “Vostochny” ( “Eastern Spaceport”) >
- Gael Langevin replied 10 years, 6 months ago
  
  We certainly want more pictures!! Great sytem for stand alone as well.
  The legs seem a bit small in proportion, but it looks darn good altogether!! I bet the crowd appreciated.
  - Alex replied 10 years, 5 months ago
    
    Thanks Gael. legs will be longer. More photo after Geek Picnic in Moscow. My robot will be read Dostoyevsky on this show. I hope that everything will be fine.
Alex posted an update 10 years, 8 months ago

design
- Alexander Semochkin replied 10 years, 8 months ago
  
  Interesting design. Do you think the robot will be able to walk? I think it is still possible to attach a tail for stability.
- Gael Langevin replied 10 years, 8 months ago
  
  Wooo iii nice posts all together and great job with the screen and legs!
  I think there is going to be interest with the legs you made.
  Are you going to share the files as Open Source for others to download? If you do, let me know I wlll add the link in the InMoov derivatives.
Alex posted an update 10 years, 9 months ago

New bumper
- Alexander Semochkin replied 10 years, 9 months ago
  
  Nice work, Alex! Could it walk?
- Alex replied 10 years, 9 months ago
  
  Until only bend and rotate. Пока только сгибаются и вращаются.
- amby replied 10 years, 9 months ago
  
  hello alex nice your legs? have you do a blog with your pictures or video thank you amby
- Simon replied 10 years, 8 months ago
  
  Very nice! Where did you get the lower stomach and legs?
- Alex replied 10 years, 8 months ago
  
  I painted…
- RentaPrinta replied 10 years, 8 months ago
  
  Hello Alex! Really nice you Legs! Slowly the InMoov become a complete Body. Do you think in the future you will have STL Files from your Legs?
  
  And this Screen? Is this the “Under Test Touchscreen” or you invent this. What is the screen for?
  
  Big Greetinxx from Boris from BERLIN
- dcochran replied 10 years, 8 months ago
  
  I am interested in the chest piece with the 7 inch screen. I have would like to do something very similar. Can you tell me where you found the STL or if you designed it?
- Alex replied 10 years, 8 months ago
  
  It is my design. I can draw bumper for you, if i will be know size of your tablet in millimeters. I use screen for demonstration of photo and video.
  - Gael Langevin replied 10 years, 8 months ago
    
    Hey cool picture on the screen, Ahaha!
- Simon replied 10 years, 8 months ago
  
  Hi Alex, would you mind sharing the lower Stomach/Hips? does the Hip bend forward? This would be great for what I am setting up for inmoov to travel. Thank you.
Alex posted an update 10 years, 9 months ago

New bumper
Alex posted an update 10 years, 9 months ago

Nervo boards
Alex posted an update 10 years, 9 months ago

Nervo boards. With boards robot working very well !!!
Alex uploaded a new picture: Nervo board 10 years, 9 months ago
Alex uploaded a new picture: DSC00243.JPG 10 years, 9 months ago
Alex uploaded a new picture: Nervo board 10 years, 9 months ago

Nervo board. With boards robot working very well !!!
Simon posted an update 10 years, 9 months ago

Mini-Bro has a new name, \”Simon\”
Simon posted an update 10 years, 9 months ago

One more picture, Mo is being worked on.
- Gael Langevin replied 10 years, 9 months ago
  
  Ahaha, one has a too big head and the other a very tiny. I see the caps came alright. What do you think about the quality? It was difficult to find a good supplier which could do embroidery at a reasonable cost on a quality cap.
  - Simon replied 10 years, 9 months ago
    
    I think the quality is great, not like most caps I see today. Well built!
  - Simon replied 10 years, 9 months ago
    
    BTY, do you know when the lower stomach / hips will be posted?
    
    Thank you.
Simon posted an update 10 years, 9 months ago

Mini-Bro and cap. It’s too big for Mini-Bro. Lol
Simon posted an update 10 years, 10 months ago

Inmoov Mini-Bro soon to meet EZ-Mo

The small hand is a challenge.
- amby replied 10 years, 10 months ago
  
  hello Merne i like you small inmoov so cute but what is this eyes? so nice
  - Simon replied 10 years, 10 months ago
    
    Hi Amby, thanks. The eyes I got from a site years ago, they are animatronic eyes. Here is one site, but if you google search you could find them cheaper.
    http://www.tech-optics.com/
    - amby replied 10 years, 10 months ago
      
      thank you for your answer amby
- Gael Langevin replied 10 years, 10 months ago
  
  Hey cool ! Good job!!
  I have been working on a small version as well and was planning to post the modified STL rather soon actually on the site. I printed only the torso and the right arm until now., but haven’t tested the actuation.
  The eyes are nice indeed!
Simon posted an update 10 years, 11 months ago

Finger Tip Sensors. Hi Gael, do you have any information on how to connect the sensors and or wiring besides the Assembly hand guild? I am not sure on what control board to uses.

Thank you.
Merne
- Gael Langevin replied 10 years, 11 months ago
  
  The sensors are connected to the Nervo shield board. The best is to add some resistances for each sensor connection.
  https://dlnmh9ip6v2uc.cloudfront.net/r/500-500/assets/e/7/2/5/5/50eb2efece395ffb21000001.jpg
  - Gael Langevin replied 10 years, 11 months ago
    
    // Flexiforce quick start example
    // Reads A0 every 100ms and sends voltage value over serial
    
    void setup()
    {
    // Start serial at 9600 baud
    Serial.begin(9600);
    }
    
    void loop()
    {
    // Read the input on analog pin 0:
    int sensorValue = analogRead(A0);
    
    // Convert the analog reading (which goes from 0 – 1023) to a voltage (0 – 5V):…[Read more]
Simon posted an update 10 years, 11 months ago

Some countries can not view this video, because Youtube says it is a copy right issue, I own the CD. They keep removing the video.
- Gael Langevin replied 10 years, 11 months ago
  
  It is not because you bought the CD, that you can use it as a soundtrack for your video. Which is a delicate combination on your video.
  By the way, it is interesting what you did with the EZ leds in the chest.
  Nice work!
  - Simon replied 10 years, 11 months ago
    
    Thanks Gael! I am using a RGB LED Array and bolted it inside the chest.
    BTY, any time frame as to when you might have the low hips for Inmoov? I know you hear this every day, but Thank you for sharing your awesome design!
Simon posted an update 10 years, 11 months ago

Happy late Christmas everyone.
- Gael Langevin replied 10 years, 11 months ago
  
  InMoov stealing the toy of R2D2 for Christmas, Merne are you trying to irritate the Star Wars fans?
  - Simon replied 10 years, 11 months ago
    
    Lol!
Simon posted an update 10 years, 12 months ago

M erne – Google+

https://plus.google.com/111109287399531253320/posts/K3Aw3f7hpDb

M erne – Google+
- Gael Langevin replied 10 years, 12 months ago
  
  Great work!!
Simon posted an update 10 years, 12 months ago

Hello all, I finely finished my Inmoov, I am waiting on a new board to get his head working and also printing right now his new neck, which is shorter for his head. Here is a video of his moves so far.

Thank you Gael for your great design and sharing it with the World!
Simon posted an update 10 years, 12 months ago

That should have be spelled Gael.
Simon posted an update 10 years, 12 months ago

Hi Gaek, I know this has be brought up before but I am unable to post. I hope you get this post.
- Gael Langevin replied 10 years, 12 months ago
  
  I know, it is a real pain. But I’m not able to fix it, only Leonardo could because I have no idea how to solve this. It is the “post” button that disappears.
Simon posted an update 11 years ago

I finely finished my Inmoov, I am not ready to post a video yet and need to first shorten the neck once I receive more filament to print. But here is a picture…

Thank you Gael, for your design and sharing it with the World!
Simon posted an update 11 years, 1 month ago

It’s starting to look like an Inmoov with a slight modification. I have much more to complete and start the programming. I am enjoying the building.
Gae,l is they any time frame on the sale of the PCB yet?
- Gael Langevin replied 11 years, 1 month ago
  
  Woo oo, big head !
  I talked again with the guys from Seed and we should get it started, but I prefer not to say when because I don’t want to disapoint anyone about timing. It was supposed to be on sale for beginning september…
- Gael Langevin replied 11 years, 1 month ago
  
  Did you finally understand how to use the potentiometers outside the servos or are you still struggling with that?
  - Simon replied 11 years, 1 month ago
    
    Hi Gael, Yes. I finely got the Potentiometers set correctly. I am finishing the chest prices and still pondering if I want to use the sensors on the fingers. By next weekend I should have movement using scripts.
    
    Thank you for your help, and as always, keep up your excellent work!
Simon posted an update 11 years, 1 month ago

Hello,

I noticed the Robcap for left and right are the same. Am I missing something? If I use the left it puts the elbowgear inside the forearm Inmoov, the right is on the outside of the forearm.

Thank you.
- Alexander Semochkin replied 11 years, 1 month ago
  
  http://www.inmoov.fr/wp-content/uploads/bpfb/257_0-28949800-1413072299_img_20141012_095846-bpfbt.jpg
  - Simon replied 11 years, 1 month ago
    
    Thanks Alexander, looks like I got the elbowgear correct looking at your pictures and web site. I am glad the internet has a translator enabling me to read your web site.
Simon posted an update 11 years, 2 months ago

more pictures…
Simon posted an update 11 years, 2 months ago

Lets try this again… Arm, biceps, and shoulder almost completed. I am having trouble with the POTs on HS-805BB’s servo and need more work/reading. Here are some pictures…..
Simon posted an update 11 years, 2 months ago

Hello Geal,

Thank you for checking the torso, I am working on the right arm and shoulder and will have more pictures my tomorrow night.

I’m wondering if you could make me an STL of the Neck but 1 1/2 inches shorter on the neck part, so it is not so long. I would like to use my animatronics head. But right now the neck is too long and my head…[Read more]
Simon posted an update 11 years, 2 months ago
- Gael Langevin replied 11 years, 2 months ago
  
  Good progress, I checked your assembly on the pictures, and all seems to be correctly mounted. Many people mount the neck the wrong way
Simon posted an update 11 years, 2 months ago

I have a Torso. I am not sure what the 2 large circles are used for does anyone know?
- Gael Langevin replied 11 years, 2 months ago
  
  The two large holes were used, during my designing to check if the shoulder was correctly placed when returning after a lift up.
Simon posted an update 11 years, 2 months ago

More Pictures… And the name of my 3D printer is a solidoole 4 8×8 in case someone asks.
And special thanks to Gael for all the hard work to make Inmoov happen!
- Alexander Semochkin replied 11 years, 2 months ago
  
  nice machine
  - Simon replied 11 years, 2 months ago
    
    Thanks Alexander. Your Inmoov currently looks like some thing out of Outer Limits. 🙂
Simon posted an update 11 years, 2 months ago

Here are some pictures of what I have printed in the past month or so. I am starting to just fit the Torso to see what parts I am missing. The right and left hands are printed. The left shoulder is also printed. I will start putting the hands and biceps together next week once I have all my servos and hardware.

Here are some…[Read more]
Simon's profile was updated 11 years, 2 months ago
Simon posted an update 11 years, 2 months ago

Both hands, fingers, wrists, forearms, right Bicep and shoulder printed, all most done with the Torso printing. .
- Gael Langevin replied 11 years, 2 months ago
  
  pictures, we want pictures.
Simon posted an update 11 years, 2 months ago

Printing my first InMoov
- Gael Langevin replied 11 years, 2 months ago
  
  Welcome to InMoov Nation
Alex posted an update 11 years, 7 months ago

http://www.inmoov.fr/members/dexkuzia/album/picture/69/
- Gael Langevin replied 11 years, 7 months ago
  
  Very complete Alexander, thanks for posting. Did you try out using kinect gestures?
Alex uploaded a new picture: Rob2.jpg 11 years, 7 months ago
- Gael Langevin replied 11 years, 7 months ago
  
  Very complete Alexander, thanks for posting. Did you try out using kinect gestures?
  - Alex replied 11 years, 7 months ago
    
    Not yet, but i’ll try
Alex posted an update 11 years, 11 months ago

From Russia with love
- Gael Langevin replied 11 years, 11 months ago
  
  Thanks for posting!
  This is our first know Russian InMoov.