Sign in to our website and become an InMoov member. It will allow you to post message, pictures, and share with others InMoov builders. It's just one click away!
Identifiant ou adresse e-mail
Mot de passe
Se souvenir de moi
HUGO a publié une note il y a 2 ans et 8 mois
continuing
HUGO a commenté une activité il y a 2 ans et 10 mois
Hola @petof alomejor es por que está mal montado como ya mencionas, te recomendaria que revisaras que la pieza este bien imprimida y no custe trabajo moverla.
HUGO a publié une note il y a 2 ans et 10 mois
Hello, I have a problem, I\’m building a inmoov bicep and the problem is the power supply, it have 0.25 amps and this is not enough to move the servos.Anybody can say me what power supply I need to move the complte robot with the link to buy. Thank you
Hello, I use a 6V50Amps power supply to move the whole robot. You can find the reference in the hardware and BOM page.
HUGO a commenté une activité il y a 3 ans et 3 mois
Yes @admin
Latest version of MRL which includes the latest of InMoov2 has now available buttons for sensor testing.
HUGO a publié une note il y a 3 ans et 4 mois
I am creating the new inmoov hand and printing the bicep parts.
Looks very nice! I like the blue & grey!
Good assembly, did you set the sensors by now?
HUGO a publié une note il y a 3 ans et 9 mois
Hello, I need help, I have a problem, I have soldered all the pins of the nervoboard, but when I connect the nervo to the arduino mega to my computer, the script to put all the servos of the hand except the one of the wrist does nothing. The impression that the order is not transmitted, do I need a power supply other than USB? Does anyone see…En afficher davantage
Hi. Yes, you need an additional power supply for the servos. I suppose the current would fry your arduino. I reused a 5V power adapter. I soldered a XT60 male adapter to the nervo board and a XT60 female adapter to the cable of the power.adapter: This way I am able to take away the current if my servos develop a life of their own. Greetings
USB power for the most part is limited to 2A under the USB2.0 standard. The average servo will draw between 2 and 3 Amps each. You will defiantly need a bigger source of power. I suggest a 6V power supply. If your planning on using it to power the whole of the Inmoov robot, then a 50 Amp power supply is recommended. There are other ways of…En afficher davantage
Le profil de HUGO a été mis à jour il y a 3 ans et 9 mois
HUGO a publié une note il y a 3 ans et 10 mois
I already bought the kinect! for more information on the kinect visit 👉 https://inmoov.fr/howto-kinect/ 😉
HUGO a publié une note il y a 4 ans
Hello everyone, I have already finished my head 🤔 well, not what is said to finish because I have to put the speaker and the nervoboard 🙂
Looking good. 🙂
HUGO a publié une note il y a 4 ans et 1 mois
Hello, I almost have a full face😀
Nice!
oups ^^
Looks like your making good progress 🙂
HUGO a commenté une activité il y a 4 ans et 1 mois
I\’m sorry, constance, but I can\’t answer that because I haven\’t created it yet. Greetings from Sevila (Spain)
Hi, thank you. Finally my robot has a closed mouth at 0° 🙂
Bonjour Constance, je suis curieux de savoir quel était la solution finalement?
Bonjour Stéphan, Le moteur a l’intérieur n’était pas correctement vissé. En vissant bien la structure à l’intérieur, c’est mieux ! J’ai du à nouveau refaire un tour de vis car ça s’était dévissé…
Hello, someone knows how to download my robot lab, thank you.
A lot depends on the version you want to start with. There is a link to the Manticore version (Officially released) on this site. Alternatively, you can get the current still in development from the http://myrobotlab.org/ site. There is a link in the upper left labelled latest. At the time of typing that was 1.1.666, but the updates happen…En afficher davantage
Spanish version:Hola mi nombre es Hugo vivo en Sevilla y estoy empezando a hacer a InMoov,abajo os dejo la version en ingles y la foto de como voy,adios. English version:Hello, my name is Hugo, I live in Seville and I’m starting to make InMoov, I’ll leave you the English version and the photo of how I’m doing, bye.
I think he is looking at me 🙂
Hello,
It has beautiful eyes 🙂