Sign in to our website and become an InMoov member. It will allow you to post message, pictures, and share with others InMoov builders. It's just one click away!
Identifiant ou adresse e-mail
Mot de passe
Se souvenir de moi
Igor a publié une note il y a 6 ans et 7 mois
Hi everyone, could you help me please? I’m trying to program the head of inmoov and I am having a lot of problems.
Hello, Could you describe what version of MyRobotLab you are using and mostly what are the problems.
Le profil de toni a été mis à jour il y a 6 ans et 7 mois
Steve Rayner a publié une note il y a 6 ans et 7 mois
Closing up the wrist.
Threading the tendons through the wrist.
Hartwig a publié une note il y a 6 ans et 7 mois
Just finished the left shoulder. This time I used JX – Servos. They have a solid metal gear and it\’s very easy to modify them.
Nice.
Nice ! I just passed my first test using external battery power and nervo board. Next step is finish the servo setup for the arm. For now I’m using the recommendation but let’s see if it’s difficult to extract the potentiometer. Will share video soon ! 🙂
Good luck 🙂 If you need I can post some pictures about how to modify the servo.
Would be great if you can share some pictures about
Getting ready to start on the second wrist.
EDGARD MARK KOMODA a publié une note il y a 6 ans et 7 mois
Bom dia, dando uma pausa no meu Inmoov, trabalhando muito no momento não estou tendo tempo disponivel, mas nunca desistirei, apenas um momento de pausa,kkkabraço pessoal.
Às vezes é bom fazer uma pausa. Aproveite o tempo para descansar e recarregar. Em seguida, volte e continue desenvolvendo seu robô. Obrigado por compartilhar suas fotos.
Obrigado por ver e comentar, sim estou parado com o projeto, poblemas pessoais, mas logo retornarei com toda força, abraço.
Matt Davis a publié une note il y a 6 ans et 8 mois
Sharing these servos. FeeTech FT5335M Mega Giant Scale Servo, for $41.97 via @amazon https://www.amazon.com/dp/B07WSX3681/?tag=davvidgrapr09-20
Thanks for sharing. Have you used these in your InMoov? Is so, what did they fit like and how did they appear to perform?
mario a publié une note il y a 6 ans et 8 mois
Muchas gracias pero como se hace con el swinGui??
Hello, Greg gave you a detailed tutorial on MyRobotLab.org: http://myrobotlab.org/content/gestos-inmoov-1
Steve Rayner a publié une note il y a 6 ans et 8 mois
Please take a look at my latest progress on the Civrays InMoov:
Nice video!
Olga a publié une note il y a 6 ans et 8 mois
Hi all, I already have a 3d printer in my possession and it is closed. I would like to mount immoov, but first I wanted to know which part I should print first (if you can pass me a link) and apart from the parts that other things would need, I mean cables, motors … With what material you recommend me to print.
Thank you all!!!
Hello, You could start with the Finger Starter and then go on with the hand. All info about materials are on the Hadware and BOM page or on the tutorial pages.
Gerard Espona a publié une note il y a 6 ans et 8 mois
Hi community 🙂 quick update on my progress. Time to work on the nervo board, really close to do my first test powering with external battery 6V 12A … hope not going to burn it 🙂
It’s fun when you see your own robot start to move. Almost like it’s coming to life for the first time. Be sure to share some video once you’ve made some more progress.
Hi Steve,
Yes was funny to see hand start to move doing some gestures and now I can’t wait to see full arm and soon the head. I will share video for sure.
how to execuje a gesture with the webgui???
Hello, The webGui has never been really working under Manticore 1.0.2693. There is many missing functions. I really recommand to use the swinGui instead.
Le profil de David C a été mis à jour il y a 6 ans et 8 mois
Jon a publié une note il y a 6 ans et 8 mois
Has anyone heard anything newer on the inmoov robots for good initiative the \ »inmoov explorer\ » https://www.theguardian.com/sustainable-business/2015/feb/06/robots-for-good-hospitalised-children-superpowers
Adam a publié une note il y a 6 ans et 8 mois
Hi all just getting started on my InMoov. looks like so much fun cant wait .
Le profil de Erhan ÖZTÜRK – erhaner1040@gmail.com a été mis à jour il y a 6 ans et 8 mois
Fernando Gomez a publié une note il y a 6 ans et 8 mois
Gael Langevin a publié une note il y a 6 ans et 8 mois
Hello Builders! I made a lots of updates in the version 1.0.2693.16 regarding the Ultrasonic sensor and the finger sensors.
HOWTO Start MyRobotLab
I also updated the tutorial for the finger sensors and made a new tutorial for the UltraSonic…En afficher davantage
Hi Gael, short question. Do you mount the hall sensor in the same way then the copper plates? HallSensor – Foam – Magnet? If not, do you have a picture? Thanks a lot, Cheers Hartwig
BezanaTech a publié une note il y a 6 ans et 8 mois
Hi all. Last weekend we met Gaël Langevin at the BMF. We saw the original project in motion and it’s really awsome.
Hello, It was great to meet you guys at the Bilbao Makerfaire!
Ludo a publié une note il y a 6 ans et 8 mois
Nervo board commandés !
EDGARD MARK KOMODA a publié une note il y a 6 ans et 8 mois
Parte da minha oficina, tudo bem organizado,kkk
Boa tarde, imprimindo e montando o Estomago medio, 4 dias e ainda falta metade,kkk como demora, mas vamos que vamos,
Le profil de Harshit Oza a été mis à jour il y a 6 ans et 9 mois
EDGARD MARK KOMODA a publié une note il y a 6 ans et 9 mois
Mais fotos do estomago
Bom dia, terminando a impressão do estomago alto, fiz tudo em 100% de preenchimento, pesou 1 kilo a peça inteira, talvez terei poblema nos servos não terem força suficiente para mover as peças.
Le profil de Sylvie a été mis à jour il y a 6 ans et 9 mois
BezanaTech a publié une note il y a 6 ans et 9 mois
After two weeks working hard this is our progress.
Here we show you our workplace. Here is where the magic occurs 😉
First of all we need to calibrate the printers. After a few tries it seems to fit.
Hi everyone. We are a non-profit association. We decided to make this project in October 2019, after a short presentation to our community.
Maurizio Lecce a publié une note il y a 6 ans et 9 mois
We are going a bit ahead, is a possible know exactly the hardware to use like servo and any other small component for hand and forarm?
Instalando Kinect e reator reciclado,kkk, todo dia um pequeno avanço, logo chegaremos ao final.
Le profil de Pims a été mis à jour il y a 6 ans et 9 mois
Le profil de jasper b a été mis à jour il y a 6 ans et 9 mois
Le profil de CarlM a été mis à jour il y a 6 ans et 9 mois
colocando um aro branco ao redor para chamar mais atenção, agora colocar uma iluminação dentro para clarear os componentes.
Continuando no reator central, escolha dificil de fazer.
Prathamesh a publié une note il y a 6 ans et 9 mois
Hello,I am working on inMoov and had completed it but still i face the issue of loosening of thread going through finger, i didnt find any issue doing it first but over time of a week or two thread gets loose. Can anyone help?
Hello, did you set the springs to avoid that effect? As explained in the tutorial, the springs are meant to keep tension in the fingers when it gets loose rather than pulling at all time.
Montando reator do estomago personalizado.
Fotos da minha evolução, agora no estomago alto.
Bom, chegamos ao estomago alto, vamos nessa, abraço a todos.
Zachary 3D Prints a publié une note il y a 6 ans et 9 mois
Hello, am new here. I\’m now working almost 2 weeks on InMoov, the torso part. It\’s very cool and I learn a lot. I have a question about the InMoov Map on this site, does it still works? The reason that I ask this is that the methode mentioned in the video doesn\’t work and is outdated. I want to be added to the Map.
Bom dia Zachary,O mapa esta funcionando certinho, na propria pagina onde você entra no mapa abaixo tem um tutorial de como fazer para se cadastrar e colocar seu local,apos ter feito tudo tera que pedir autorização ao dono do mapa,mas rapidão ele libera para você, de mais uma olhada detalhada no site,e procure por lá.
leboucher a publié une note il y a 6 ans et 9 mois
Bonjour à tous !! Après une dizaine de jours de travail, la tête et le cou sont opérationnels, commandés par une arduino mega. En parallèle j’ai longuement étudié et essayé ROS , MRL et EZBuilder, et j’ai finalement arrêté mon choix sur ce dernier. Je suis impressionné par la facilité de programmation avec des blocs. J’utilise MRL pour m’insp…En afficher davantage
Terminando as tampas trazeiras, Adaptado tampa de acrilico reciclado.
Vamos devagar e sempre, todo dia uma peça sai da Impressora, ainda terminaremos,fiz um pack de bateria de cano PVC, ficou muito resistente e mais rapido que imprimir,kkk
Bom dia, finalizando tampa trazeira do meu Inmoov, muito contente com os resultados.
I just started with the InMoov robot build, very new to this, but I\’m very technical and handy.
Le profil de Marcel a été mis à jour il y a 6 ans et 9 mois
Gerard Espona a publié une note il y a 6 ans et 9 mois
Hi, after some printing time 🙂 Good progress on bicep assembly .. soon full arm working attached to torso 🙂
I like that white and orange combination. Looks clean.
Thx Michael !
Well done Gerard, it looks as if you are advancing well, I agree with Michael Wharton the colour combination works very well.
Thx Michael Hayward ! Yes feeling doing good progress and happy to see you all like the look&feel. I will post more photos as I do some progress on album. Can’t wait to see fully finished and working and apply some AI to perform some tasks 🙂
leboucher a publié une note il y a 6 ans et 10 mois
Les pièces sont strictement celles qui sont en ligne sur le site. Quelques photos
L’impression des pièces de la tête, du cou et de la partie supérieure du torse sont terminées et l’assemblage avance rapidement. En parallèle, j’ai achevé l’avant bras et la main gauches, l’objectif étant de disposer de deux parties fonctionnelles (main et tête) pour consacrer l’hiver à la programmation et à déterminer quel système de…En afficher davantage
Bravo Leboucher, tres bon plan
smattachai.p a publié une note il y a 6 ans et 10 mois
Is there IOS App for IPhone to control InMoov robot?
Can we use Raspberry Pi to run MyRobotLab for InMoov robot?
Chuah Wei Jie a publié une note il y a 6 ans et 10 mois
I tried to connect the external power source like this, but it seems like the nervo board does not recieve any power…
Hello,
Only these leds will light up when the Nervo Board is powered but not connected to a PC via the Arduino. Apparently looking at your photo, you do not have these 4 optional leds soldered. (they are not necessary for the board to work, it’s optional.) Connect the Arduino to the PC and check with a voltmeter, if you have power to the…En afficher davantage
The servo didn’t response when I try to move it using SERVO_CALIBRATION.bat
Did you upload the MRLComm.ino in your Arduino?
Yup, definitely.
Ok, you have selected the correct COM port in SERVO_CALIBRATOR.bat ? and the correct pin for your connected servo according to this map:
http://inmoov.fr/wp-content/uploads/2019/02/default-hardware-map7.jpg
Yes. It’s a COM3 (I had checked in Device Manager). I currently test on the Neck part, which are pin 12 and 13 only, but the servo doesn’t response. I shows that the connection succeed for the Arduino by the way. I wonder, just maybe, is it the problem of the connection/wiring/soldering?
It’s odd, there is not much that can go wrong with the soldering, beside making a bad shortcut. Which you would have seen the smoke.
I suspect the ribbon cables in the male headers. Maybe a ribbon cable inverted between the two end points headers.
Do you have a voltmeter? You can test to see if the power is going to the servo from the XT60…En afficher davantage
Solved. The soldering of Chuah Wei Jie was lose between the XT60 and the power supply.
Le profil de Carlos Tejera a été mis à jour il y a 6 ans et 10 mois
Le profil de PierreMDM a été mis à jour il y a 6 ans et 10 mois
Michael wharton a publié une note il y a 6 ans et 10 mois
Little by little
A big puzzle, but when the puzzle start to move and talk, it’s a robot. 🙂
Well done Michael, it’s really coming along. Most importantly from your smile you are enjoying the journey. Does your InMoov have a name ?