Sign in to our website and become an InMoov member. It will allow you to post message, pictures, and share with others InMoov builders. It's just one click away!
Identifiant ou adresse e-mail
Mot de passe
Se souvenir de moi
Le profil de Isabel a été mis à jour il y a 7 ans et 11 mois
Isabel a publié une note il y a 7 ans et 11 mois
Just starting my InMoov journey! Almost finished printing the forearm and will start the assembly.
This is my first time printing this extensively with ABS, does anyone have any tips for getting rid of the waviness in the walls and the infill not fully attaching to the wall? I’m using an Ultimaker 2…En afficher davantage
Hello ! congratulations on your progress! for the ripples is wobble, you find on thingiverse anti-wobble pads, you can also separate the top of the threaded rods of the frame, the set gives a good result. 2nd solution: it is possible to replace with trapezoidal rods without skates but you have to change the firmware. for filling I do not know too…En afficher davantage
thanks for the tips, ill give them a try!
Dominique a publié une note il y a 7 ans et 11 mois
This Face tracking and yolo process in the same time. Two camera, one for tracking, one for yolo.
What is YOLO and what does it do? Your face tracking is very good.
With yolo, you can do this: http://myrobotlab.org/content/yolo-dnn-support-now-opencv
For face tracking, i use tracking service from MRL
oeilG = Runtime.create(« oeilG », « OpenCV ») oeilG.setFrameGrabberType(« org.myrobotlab.opencv.SarxosFrameGrabber ») oeilG = Runtime.start(« oeilG », « OpenCV ») oeilG.setCameraIndex(0) tracking =…En afficher davantage
That’s cool, def need to check out the code for this thanks for sharing
Anmar Mashat a publié une note il y a 7 ans et 11 mois
Hello, i want to ask what is the best camera with high quality i can use it on the eye ?
Reimarc a publié une note il y a 7 ans et 12 mois
Hi All, any recommendations on a 3d printer to get started? Eager to get the project going….truly amazing initiative to get started! 🙂
It’s going to be dictated by how much you’re willing to spend. The requirements for the size put you into a different level than simply cheap crap but do keep in mind you get what you pay for with these. Look at your future use and know that there are a ton of parts to print..then assemble. The better the machine, the better it’ll look and the…En afficher davantage
Thanks a mil Team Sammy 🙂 Good advice and I will definitely consider it!
Stéphane Abello a publié une note il y a 7 ans et 12 mois
Debut du projet ! Je commence par la tête 🙂
Nigel a publié une note il y a 7 ans et 12 mois
Great project Gaël!
When I showed my wife, she said wouldn’t it be nice if old people could have one to keep them company.
Just waiting for my 3D printer to arrive, can’t wait.
James Kruse a publié une note il y a 7 ans et 12 mois
Progress
New back panel installed
Bob Houston a publié une note il y a 7 ans et 12 mois
Hi! This is a really good looking wheelbase. I’m going to do something like that for Robyn.
Perry a publié une note il y a 7 ans et 12 mois
Nice, when will we hear some tunes?
SwanRobotics.com a publié une note il y a 8 ans
I finally made some progress on the inMoov robot after the crash 2 years ago.
Nice to see you’re working on him again. The picture after the fall was heartbreaking.
Thanks @danf
James Kruse a publié une note il y a 8 ans
Another view
Vid of the first finger working with a micro servo
Bob Houston a publié une note il y a 8 ans
I’ve added some new parts to my InMoov.
That’s so cool!
Awesome work,,, The Clean Prints and Cable Wraps really makes him a Fine Specimen
Congratulations! What a beautifull base you made!!
Bob? What did you use for the power! Is it a mother board that drives your robot or a notePad! Thanks in advance! 🙂 PS: Excuse my English!
Hand servos for #inmoov flex hand. But now I see a new plan to put Gael’s design micro servos at 90degrees
Mindless a publié une note il y a 8 ans
Hay Guys & Girls -Mr Gail I almost finished organizing all the files and stuff for my Modded Inmoov Arm – I will be posting it on Wevolver and NoT Thingiverese ,,, I found this YouTube Video on my downtime that a though was really worth sharing even though its got nothing to do with Inmoov but at that some time it could – ,, anyway this will be…En afficher davantage
I have uploaded a Battery Door with the MRL logo on it to Thingiverse. http://www.thingiverse.com/thing:2796925
I have printed the top door and it looks great, thanks
Gerhard a publié une note il y a 8 ans
i start building my robot !
Hay Guys,,, Not sure how many of ya have seen this,,,, but this Dude is my kind of Robotic Engineer and deserves A+++
Thanks for posting this mindless. I have watched it 3 times so far and can’t get enough. If you go to their website check out their ‘singer’
No worrries Perry,,, i thought is was rather cool and worth sharing 🙂 P.S- I posted one more that is very interesting
joao luiz morales a publié une note il y a 8 ans
first head test I’m from Brazil.
Nice looking prints. Where in Brazil are you?
I’m from São Paulo In Brazil it is more difficult to find servos at low cost for this it takes more time to develop my project
Ola João! Tem algum grupo especifico para o Brasil? A mais de 1 ano venho lendo e estudando, estou próximo de iniciar esta jornada e trocar idéia com brasileiros seria excepcional.
Hello John! Do you have a specific group for Brazil? For over a year I have been reading and studying, I am close to starting this journey and exchanging ideas with Br…En afficher davantage
Ola marcos, existe um grupo chamado vilamaker aqui em São Paulo. já fui em algumas montagens da mão do inmoov, mas eles estão meio devagar com o projeto.
Hello,Marcos there is a group called vilamaker here in São Paulo. I’ve been in some montages of inmoov’s hand, but they’re kind of slow with the project.
Sou do interior do Paraná, aqui não se encontra nada.
entendo se inscreva no meu canal para obter informaçoes
Uploaded a couple of plates for InMoov’s back on Thingiverse, http://www.thingiverse.com/thing:1616318 As I said in the notes , if anyone has Myrobotlabs logo in an STL. I would be happy to make a battery door with that on it to.
awesome! thank you..
you can download 2 versions of an stl file for the MRL logo here https://www.dropbox.com/s/f3ksaz3s7l6peb3/mrl%20logo1.STL?dl=0 https://www.dropbox.com/s/83j98uht0sqzx7n/mrl%20logo2.STL?dl=0 let me know if you want them a different size or thickness regards geoff
Thanks geoff, I have uploaded the battery door with the MRL logo on it to Thingiverse.
javier a publié une note il y a 8 ans
thanks
8 20kg servos ordered- JX PDI-6221MG 20KG Aluminium Metal Gear; hoping they fit
I have a few of those servos fitted to my Inmoov robot Fred, that work a lot better than the MG966R You will have no regrets there
Excellent
Hi James, you can find a step by step guide for these servos here : https://groups.google.com/d/msg/inmoov/FW3tZmAdfBs/mViAr9aXAwAJ
Thanks!
Today’s experiment is 5 micro servos in a flexible filiment joint hand
Let us all know how you go with these, it looks good
Inmoov looks better with some color!
looking good!