Sign in to our website and become an InMoov member. It will allow you to post message, pictures, and share with others InMoov builders. It's just one click away!
Identifiant ou adresse e-mail
Mot de passe
Se souvenir de moi
sahra a publié une note il y a 9 ans et 8 mois
hi guys !! can u please tell me where i can find the chest cover ?! 🙁 cuz i can’t find theme ?
You will find all the chest parts here :
InMoov body parts library :
and for direct download of the zip file with all the stl files : http://inmoov.fr/wp-content/uploads/stl/Chest/InMoov-Chest-Back.zip
Le profil de ╔ Jack ╗ a été mis à jour il y a 9 ans et 8 mois
Le profil de My's Moov a été mis à jour il y a 9 ans et 8 mois
Peter Anderson a publié une note il y a 9 ans et 8 mois
After the cyclone induced demise of Amos MK1, here is the progress on Amos MK2.
Looks really good. Nice eye treatment
woww so great!! can i konw where u found chest covers ? i really can’ t find theme 🙁
Great looking, nice choice of colors!
juerg a publié une note il y a 9 ans et 8 mois
An error in a script and an unreachable neck position – just burned another HS805BB so badly, it burned a hole into the case and I can still smell the odor of death when entering the house. I have added now readjustable fuses for all of my large servos (PFRA 160, Reichelt.de). Hope this prevents future smoke!
Thats a good idea! Can you share details on how to install them?
Sorry, yes, just route the connection from either plus or minus pole from the power supply to the servo through the fuse. The fuse is supposed to heat up with current flowing through it and increases resistance thereby lowering the voltage for the servo and make it stall. The fuse regenerates when cooling off. The fuse works in a slow mode so…En afficher davantage
Thanks juerg, I’ll check into it more as well.
mmm good idea, i add too some capacitors to prevent jitter ( i test it tonigh ) : http://letsmakerobots.com/node/12679
let me know about your caps result. I had an issue with a digital servo impacting another analog one. After connecting the dig servo to another power distribution point the problem resolved itself but having a cap for the signal lines looks to me like a more robust solution
I think we have the same problem, I have mixed dig cys and analog 805bb. I tell you the results soon
Update: Actually had a problem with left shoulder rotation servo (continuing small repositiong with growl) and after a while it stopped to move (fuse and servo rather hot) so the fuse did it’s job. Have added now the 104 (100nF) caps for all shoulder servos (between signal and ground) and as it did not completely stop the growl a lot of has gone…En afficher davantage
Juerg I just want to say : IT’S MAGICAL 🙂 . No more jitter or zombie servo when detach : https://www.facebook.com/photo.php?fbid=10210323785361860&set=p.10210323785361860&type=3&theater
thanks, great picture but I do not use nervo boards. the pin right next to e.g. 12 is the signal line? the dark green edged pins are the + power ones? the 100uF ground side is on the signal? and 104 is a 100 nF cap?
the 100uF ( the big chimical, it’s bad we need ceramic ) is pluged to +6v ground power line . The 100nF ( The small 104 ceramic ) is pluged to each signal pin. ( +signal , ground ) The signal and the power shared the same ground.
Great! I remember a post on the InMoov forum mentionning something similar, It sure would be great to add that option on the next Nervo boards release.
Bill a publié une note il y a 9 ans et 8 mois
Can anybody Explain the purpose of the xbox and what is its function to the whole project ?
Thank You That was very Helpful to me an my Students
Dennis a publié une note il y a 9 ans et 8 mois
Great progress and nice gesture expression!
pedro a publié une note il y a 9 ans et 8 mois
just teached my inmoov sending emails!! if anyone is interested just pass by in myrobotlab.org to see my post
Thomas a publié une note il y a 9 ans et 8 mois
@admin Hi Gael what about the stl for the battery lid ? Maybe it is shown at the build yours tutorial. Perhaps my eyes aren\’t the best so I can\’t see it Thanks in advance
Alan Timm a publié une note il y a 9 ans et 8 mois
Quick video showing ROS Kinect2 integration with InMoov.
Markus a publié une note il y a 9 ans et 8 mois
Robyn Inmoov celebrating 50000 views.
Hi Robyn, Congratulations for your record !!! Say Hello to Markus for me 😉
this is a video of Amy doing a demonstration for a coding club a while back.
I originally struggled with an UP plus 2 printer in my first attempt…no offence to up owners but with my Zortrax M200 this time around has been an absolute delight. Everything fits perfectly first time. Thanks Gael for all the upgrades to the head! The encapsulated nuts for joining the skull sections work a treat, and the eye mechanism has…En afficher davantage
Peter Anderson a publié une note il y a 9 ans et 9 mois
Rebuild of Amos….using new parts ..
Paco Álvarez a publié une note il y a 9 ans et 9 mois
Hello everyone!
From Tokyo, here we go! A long way to go but I canno wait! Let’s do it! 🙂
hello tokio!!! be carefull this is addictive! once u got the finger you wont stop! Btw in japan, doesnt exist projects like this?
you might want to use this enhanced pulley from Mat as it avoids lose strings and allows for more precise movements. http://www.thingiverse.com/thing:1157705
Thank you juerg! I’ll check them out!
Thanks again juerg! the worked perfectly! 😉
Hello Pedro! Looking around in Japan I found an interesting hand project (http://exiii.jp/). But, when I saw Inmoov, it was love at the first sight! 🙂 I want to build my own one and do my best to contribute to the communty 🙂
well keep uploading some photos 🙂
pedro a publié une note il y a 9 ans et 9 mois
hello, this is some photos from the Lisbon MakerFaire 2016,
4 inmoov creators this time!!!
Martin Tellblom a publié une note il y a 9 ans et 9 mois
Waiting for servos and printing parts every day