Inmoov by B.Stott

I have been in contact with someone since a while now, and I can tell you that person is really working on InMoov’s hands. In fact, some suggestions came from him, for exemple the new brackets and the rotational bicep.

Have a look at all his pictures, he did a great job. I am so delighted when I see others constructions, it really helps to make me go on with this project.

Thanks B.Stott

To see more of his work: Here

Share On:

Facebook

Google +

Twitter

This entry was published on September 7, 2012 / Gael Langevin. Posted in photo, Uncategorized. Bookmark the permalink.

The Author

Gael Langevin

Comments 14

jerson December 10, 2012 at 5:28 pm

This comment has been removed by the author.
jerson December 10, 2012 at 5:32 pm

hi man thanks for the help, i come here for youtube 🙂
but i have questions.

as do the mechanism for lifting a finger?
I see you used cables, but as well make it move your finger?
what kind of cable you use?
- gael langevin December 10, 2012 at 6:51 pm
  
  Hi jerson,
  I used 2 nylon threads of 0.8mm to actuate each finger with one servomotor TowerPro MG995. If you search a little on the blog and the download links you will should find most of the answers you are looking for.
  Best regards
- jerson December 11, 2012 at 4:33 am
  
  This comment has been removed by the author.
jerson December 11, 2012 at 5:05 am

This comment has been removed by the author.
jerson December 14, 2012 at 11:33 pm

how to contract and expand the finger with nylons? i dont understand this part
- gael langevin December 15, 2012 at 12:11 am
  
  I have two nylon rods per finger. When the servo rotates, it pulls nylon1 and release nylon2. Now make the servo rotate the other way and it pulls back nylon2, releasing nylon1.
  see this picture: http://www.inmoov.fr/imm_old/3.bp.blogspot.com/-XFKHfHxbb6E/T-SUwwIa0CI/AAAAAAAAANY/qLownYrN_ZE/s1600/DSC04949.JPG
  
  Hope this helps
- jerson December 16, 2012 at 10:29 pm
  
  yeah, but i want to see, as you put exactly the nylon in the fingers.
  this mechanism do not have in Pictures :C
- gael langevin December 16, 2012 at 10:51 pm
  
  If you look at the parts of the fingers, once printed, it is easy to understand. There is two channels where the nylons run through. One on top and one on the bottom.
- jerson December 17, 2012 at 3:59 am
  
  thanks i understand now 🙂 but i have another problem, in this video
  http://www.youtube.com/watch?feature=player_embedded&v=lkmXFKQgZm8
  how to rotate the hand? use another servo?
  and… how to so that the nylons do not get tangled when rotate? (zorry i use google traductor)
- gael langevin December 17, 2012 at 6:41 pm
  
  Have a look on the blog in here, it is all explained.
  http://inmoov.blogspot.fr/p/assembly-help.html
  In this section:
  “Here are some instructions to illustrate the building of the rotational wrist part.”
- jerson December 18, 2012 at 3:11 pm
  
  This comment has been removed by the author.
- jerson December 18, 2012 at 5:30 pm
  
  ok Thanks for your time 🙂
  if I finish my work I’ll send you a photo 🙂
  but I’ll do it with wood, I have enough money for a 3D printer: C
jerson December 18, 2012 at 5:31 pm

This comment has been removed by the author.

Comments are closed.