Sign in to our website and become an InMoov member. It will allow you to post message, pictures, and share with others InMoov builders. It's just one click away!
Username or Email Address
Gael Langevin posted an update 2 years, 7 months ago
Quarantine has given me time to work on the graphical UI for InMoov in the new version of MyRobotLab (non released NIXIE).
There is still many bugs because the webgui is a BIG work in progress, but you can try it out and see many new features.
Thanks to Astro for all the help and making a tutorial to get me to understand how to work with…[Read more]
Gael Langevin posted an update 2 years, 9 months ago
We recently encounter difficulties shipping some of your orders from InMoov website because of the Corona Virus. China has recently extended it’s quarantine time. Some components have been held by the customs much longer than usual and won’t probably arrive before weeks.
Therefore I have refunded all orders related to “NervoBoards…[Read more]
Gael Langevin posted an update 3 years ago
I made a lots of updates in the version 1.0.2693.16 regarding the Ultrasonic sensor and the finger sensors.
HOWTO Start MyRobotLab
I also updated the tutorial for the finger sensors and made a new tutorial for the UltraSonic…[Read more]
Hi Gael, short question. Do you mount the hall sensor in the same way then the copper plates? HallSensor – Foam – Magnet? If not, do you have a picture? Thanks a lot,
Gael Langevin posted an update 3 years, 5 months ago
Thanks to Sebastien, our webmaster, the sidebars of the site are back up again.
This gives again access to the members albums and to the Tweeter feed.
Wordpress had an issue and it was not working anymore since about a month…
Bob Houston posted an update 4 years, 5 months ago
I just finished building and installing Gael’s new articulating neck design. His design is great as usual, very robust and smooth.
Hello, is the stl file available?
Bob Houston posted an update 4 years, 9 months ago
This is a really good looking wheelbase.
I’m going to do something like that for Robyn.
I’ve added some new parts to my InMoov.
That’s so cool!
Awesome work,,, The Clean Prints and Cable Wraps really makes him a Fine Specimen
Congratulations! What a beautifull base you made!!
Bob? What did you use for the power! Is it a mother board that drives your robot or a notePad! Thanks in advance! 🙂 PS: Excuse my English!
I have uploaded a Battery Door with the MRL logo on it to Thingiverse.
I have printed the top door and it looks great, thanks
Uploaded a couple of plates for InMoov’s back on Thingiverse, http://www.thingiverse.com/thing:1616318
As I said in the notes , if anyone has Myrobotlabs logo in an STL. I would be happy to make a battery door with that on it to.
awesome! thank you..
you can download 2 versions of an stl file for the MRL logo here
let me know if you want them a different size or thickness
Thanks geoff, I have uploaded the battery door with the MRL logo on it to Thingiverse.
Bob Houston posted an update 4 years, 11 months ago
All the best of the season to everyone!!
Happy New Year Bob!!
And keep posting great videos and updates!
Your wokshop is really great and spacious and warm, better be because it looks cold outside.
Thanks Gael. Same to you. Cold outside!!!!!! That day it was a crisp -37 degrees C outside !!!
Gael Langevin posted an update 4 years, 11 months ago
Happy New Year Everyone!!
Have a great time and enjoy your family, friends and robots!!
bonne année à toi Gael .
et a toute la communauté d INMOOV.
Hello InMoov builders!
Here is a view of the knee actuation. This is done via MyRobotLab with the DIY Servo service.
More to come with the Ankle and Thigh actuation.
Awesome,,, It’s great to see your R&D work on his mechanical operation for this section–,,,
This is awesome,
How long before we start to see the files for the different parts?
I am very interested in the files for the feet and ankle drive system.
Well, I am waiting for some components from AliExpress which need to be tested before release. Just for info this is already my third knee design, which all three were pretty different. R&D takes a long time and my problem is that I don’t only work on the legs.
beautiful advanced gael.
Gael Langevin posted an update 5 years, 1 month ago
I started the tutorial for the legs assembly:
Legs Non Motorized
I still need to finish it but I already published it because I see some of you already have started to print them.
Have fun building!!
Thank you Gael for your work. I’m waiting for the end of your tutorial to start printing.
our Inmoov are going to be beautiful.
Get your printers warmed UP!! The legs I had created a long time ago for InMoov are ready to download.
These are the version for standing, not motorized. Beware that some parts exceed the 12x12x12 standard. The reason is that I was not going to upload these parts but time to create the motorised legs is taking much longer because I barely have…[Read more]
Awesome! They look fantastic.
So beautiful !! Thanks Gael
1/2 Ash is really happy : i can ear him singing in his workshop : « …/…
Your vagabond shoes, they are longing to stray
Where can they be downloaded? I do not see them on your site?
here is the link:
InMoov body parts library :
Singing in the workshop is always a good sign!
Thanks, I hope your InMoov enjoys them
Oh, very nice. Magnifique!
I’m asking the same question where is for download?
Hello, you can find them in the gallery:
Bob Houston posted an update 5 years, 5 months ago
Flexible finger joints for InMoov
amby posted an update 5 years, 5 months ago
you can see my prototype legs with drill motor work nice thank you my friends
Keep it up
hello everybody i can show you my work actually you can see my prototype leg with drill motor the manuel tests work nice
Gael Langevin posted an update 5 years, 6 months ago
I have added a docking feature for the Lenovo 8″ Tablet. This helps to prevent to damage the fragile USB port on the tablet and of the OTG cable.