Site-Wide Activity – Что такое цена: функции, виды, формирование и отличие от стоимости

Gael Langevin posted an update 10 years, 3 months ago

@ambroise super, Really looking forward to see the video
amby posted an update 10 years, 3 months ago

hello the world it is so long time i dont give some new it is because il work to build my legs about the robot
- Gael Langevin replied 10 years, 3 months ago
  
  Ehi nice project Amby! some videos in action!! And specification details!
  Controlled by MyRobotLab?
  Other builders will love that.
  - amby replied 10 years, 3 months ago
    
    thank you gael i working to find a nice solution for my ankle and i do a video after for show everybody and in opensource 🙂
Mats Önnerby uploaded a new picture: 20150906 002.JPG 10 years, 3 months ago

I had several ideas when I started to print the head. The large servo was more expensive than a small, so I tried to replace it with a standard size sero. I also wanted to mount a better camera in the head than a USB camera. My modified head contains a Raspberry PI 2 with a Raspberry Pi Camera module mounted in one of the eyes. It also contains…[Read more]
- Gael Langevin replied 10 years, 3 months ago
  
  wooouu, setting the brain in the skull.
  What sort of camera did you set in?
  I tested my full InMoov with the Raspi2 and was a bit disapointed with latency. The Odroid U3 was also having latency…
  Let us know your Rasp2 acts when you will be using speech recognition along with OpenCV tracking, so we can share comparison.
  - Mats Önnerby replied 10 years, 3 months ago
    
    I use a Raspberry PI Camera module connected directly to the Raspberry CSI port. I has really good quality for still pictures and video stream is OK. I tried to use it with MRL and the OpenCV service, but I got some error messages. I will sort it out with the developers of MRL. Thay are all very nice, skilled and helpful people.
    - Gael Langevin replied 10 years, 3 months ago
      
      Others have tested the Raspi Camera module into MRL with success. Your errors might be related to which version of MRL you are using.
      When I tested the camera with the Raspi2, I was using version 1.1.107 and it was working fine, though with latency.
Mats Önnerby uploaded a new picture: 20150910 017.JPG 10 years, 3 months ago

This is a part of the Bicep. I use PLA, and it's not as soft as ABS. So when I tried to mount them together, it was impossible, because it wouldn't flex. But PLA gets soft at relativley low temperatures, so I used a heatgun at a low setting to heat the connections. After heating the plastics for a short while, it was easy to mount them together.…[Read more]
- Gael Langevin replied 10 years, 3 months ago
  
  Great idea, I’m sure this will a lot of builders using PLA!
  - Gael Langevin replied 10 years, 3 months ago
    
    I should add this suggestion in the tutorial for PLA users if it is okay with you.
    - Mats Önnerby replied 10 years, 3 months ago
      
      Yes, please. The main reason for me to share my experences is to help other builders.
Mats Önnerby uploaded a new picture: 20150907 012.JPG 10 years, 3 months ago

Hand and forarm printed in black PLA. I use recessed M3 screws to hold it together. I drill a 3mm hole in the part to be mounted. In the part that it should be mounted to, I first drill a 2.3 mm hole and then I use a 3mm taps to make a thread. It's not easy to make the thread straigth by hand, so I mount it in a drill.The 8mm screws are made from…[Read more]
- Gael Langevin replied 10 years, 3 months ago
  
  Tabing the holes really helps, it is what I also do. Unfortunately not everyone has this kind of tools.
  Great work by the way!
Kerry Ludwig posted an update 10 years, 3 months ago

Love the new site!
- Gael Langevin replied 10 years, 3 months ago
  
  Great, I’m glad about that!
Bob Houston posted an update 10 years, 3 months ago

Nice new website look.
Matjaž Jernej SPSŠB's profile was updated 10 years, 3 months ago
Maker Space at Ligugé (86) France's profile was updated 10 years, 3 months ago
Alexander Semochkin posted an update 10 years, 3 months ago

My experiments with polymer artificial muscles: the movement of the InMoov robot finger.
- Alexander Semochkin replied 10 years, 3 months ago
  
  One polymer artificial muscle can pick up 200g load with contraction 1 cm.
- Gael Langevin replied 10 years, 3 months ago
  
  Cool that you are experimenting this also!!
  I’m glad to see some other tests.
  With the few tests I did with polymer muscles, I was a bit disapointed about the speed, and precision. Also as results due to the wire temperature, the polymer was getting less and less responsive and brownish.
  Do you get good results, when you have two muscles, one for…[Read more]
  - Alexander Semochkin replied 10 years, 3 months ago
    
    These muscles have no good control technology yet. It is difficult to organize the rapid heating and cooling. What characteristics of muscles were in your tests : resistance and the material of the wire, the voltage for muscle contraction, and what electronics did you use for that?
    
    Texas scientists claims that these muscles do not lose their…[Read more]
    - Gael Langevin replied 10 years, 3 months ago
      
      Its been at least a year, I did these tests.
      The polymere wire was 0,8mm. The electric wire resistance was Nickel Chrome 0,3mm. I would vary the temperature of the resistance using a 220v light shader directly connected to the resistance. (dangerous tests…) So I haven’t calculated what Amps was drawn by the resistance.
      The length of the expended…[Read more]
bobjacon uploaded a new picture: Bob J at NJ Maker D… 10 years, 4 months ago

Bob J at NJ Maker Day on March 21 2015 at Cape MAy Courthouse Library with InMOOV hand and display.
- Gael Langevin replied 10 years, 3 months ago
  
  Hello Bob Jacon! Hello hand!
bobjacon uploaded a new picture: Maker Day at Cape M… 10 years, 4 months ago

First Annual Maker Day at Cape May Courthouse Library in NJ on March 21 2015. I was printing InMOOV (right hand) there.
- Gael Langevin replied 10 years, 3 months ago
  
  Ehi ! nice fun time coming up!
Bob posted an update 10 years, 4 months ago

Started to assemble the torso and also made a stand from an old office chair and chrome pole. This allows me to move and work on InMOOV much easier. Also included back of torso. I had a difficult time trying to figure out how to mount the servo holder but I think this is correct.
bobjacon uploaded a new picture: Bottom of an office… 10 years, 4 months ago

Took the seat off of an old office chair. This will act as a base for the torso to get mounted to. I added an adjustable metal pole to this stand that you can see in another picture.
bobjacon uploaded a new picture: InMOOV meet Bob J 10 years, 4 months ago

The start of a new friendship!
- Gael Langevin replied 10 years, 3 months ago
  
  A bit of Photoshop here and there, ahaha.
  That’s the way to get the InMoov logo turned in the correct position.
bobjacon uploaded a new picture: Torso stand 10 years, 4 months ago

Stand made from the bottom of an office chair and a metal adjustable height pole.
bobjacon uploaded a new picture: Front of torso view 10 years, 4 months ago

Here is a view of the front of torso. I have it mounted on a temporary pole until I get further along.
bobjacon uploaded a new picture: Back of torso 10 years, 4 months ago

Here is the back of the torso view
- Gael Langevin replied 10 years, 3 months ago
  
  Great!
Bob posted an update 10 years, 4 months ago

Just purchased a 3D printer based on Makerbot Replicator 2X called PowerSpec 3D Pro. I hope to make some great progress now!
- Gael Langevin replied 10 years, 4 months ago
  
  Nice, let us see your progress in pictures when you start to print InMoov.
dougbrion uploaded a new picture: FACE.jpg 10 years, 4 months ago
- Gael Langevin replied 10 years, 4 months ago
  
  Nice prints!
  - Douglas replied 10 years, 4 months ago
    
    Thanks Gael!! Hopefully the whole of Inmoov will look like that when complete
Douglas posted an update 10 years, 4 months ago

Inmoov is starting to come together!
- Gael Langevin replied 10 years, 4 months ago
  
  cool man! Ready for sun!
  - Gael Langevin replied 10 years, 4 months ago
    
    Did you start playing with the Nervo board?
    - Douglas replied 10 years, 4 months ago
      
      I have indeed….the soldering and wiring has begun 😉
      
      Gael Langevin replied 10 years, 3 months ago
      
      To attach the Arduino in the back, there is some casing available on Thingiverse. Make sure you still can add the Nervo board. Also try to place them like I did, because if you want to be able to use the files I will publish for the back of InMoov.
Sebastien posted an update 10 years, 5 months ago

Hello,
Is somebody try voices for inmoov comming from Voxygen French cie ?
- zape86 replied 10 years, 5 months ago
  
  Yes, on https://voxygen.fr/
  like the bicool voice 😉
Sebastien uploaded a new picture: inmoov-introspectio… 10 years, 5 months ago
Conroy Bradley's profile was updated 10 years, 5 months ago
Bob posted an update 10 years, 5 months ago

Successful test of inMOOV hand using EZRobot controller board. >
- Gael Langevin replied 10 years, 4 months ago
  
  Nice! Do you plan to make the whole robot?
- Bob replied 10 years, 4 months ago
  
  Hi Gael, Yes I do plan on printing the whole robot. Up until now, I have been using our public library’s 3D printer and decided to purchase my own. I did not want to spend the high cost of a MakerBot 2X Replicator which is what the library has. I have found a printer based on MakerBot called PowerSpec 3D Pro with dual extruders that handles ABS…[Read more]
Bob posted an update 10 years, 5 months ago

Getting ready to try out the servo motors using EZ-Robot controller…
Mirkosoft posted an update 10 years, 5 months ago

My inmoov Jarvis
Mirkosoft uploaded a new picture: Last update 10 years, 5 months ago
- Mirkosoft replied 10 years, 5 months ago
  - Mirkosoft replied 10 years, 5 months ago
    
    My inmoov Jarvis
- Mirkosoft replied 10 years, 5 months ago
Mirkosoft posted an update 10 years, 5 months ago

>
Peter Anderson uploaded a new picture: image.jpg 10 years, 6 months ago

Latest bit of work. Smoothing and finishing.
Peter Anderson uploaded a new picture: image.jpg 10 years, 6 months ago

A bit more work done.
Peter Anderson posted an update 10 years, 6 months ago

More progress….

>
Gael Langevin posted an update 10 years, 6 months ago

Some time ago I was in Poitiers, invited for the Gamers Assembly by Quai-Lab. I met some young fellows that wanted to build legs for InMoov following good dimensions and my 3d view concept. Here is what they have achieved so far, they started to print them as…[Read more]
- RentaPrinta replied 10 years, 6 months ago
  
  Really cool!
  
  I hope and i pray that our Inmoov will get legs!!!
  - Zungara replied 10 years, 6 months ago
    
    Really cool!
Gael Langevin posted an update 10 years, 6 months ago

InMoov with realistics eyes by Peter Anderson
amby posted an update 10 years, 6 months ago

very nice your legs
it is possible to see a video work
thank you
Alex posted an update 10 years, 6 months ago

City Blagoveshchensk. Space Festival for young engineers in Russia. Cosmodrome “Vostochny” ( “Eastern Spaceport”) >
- Gael Langevin replied 10 years, 6 months ago
  
  We certainly want more pictures!! Great sytem for stand alone as well.
  The legs seem a bit small in proportion, but it looks darn good altogether!! I bet the crowd appreciated.
  - Alex replied 10 years, 6 months ago
    
    Thanks Gael. legs will be longer. More photo after Geek Picnic in Moscow. My robot will be read Dostoyevsky on this show. I hope that everything will be fine.
Sebastien posted an update 10 years, 6 months ago

>Airwin first video…

Airwin InMoov Robot first video – YouTube

https://youtu.be/yPF8UvYGhg8

First test of our InMoov Robot. Juste a funny video on the first parts already done on this project.
Sebastien posted an update 10 years, 6 months ago

Airwin InMoov robot first video
- Gael Langevin replied 10 years, 6 months ago
  
  Great! I always enjoy videos, specially when they are comic!
  By the way great progress Quai-Lab
Peter Anderson uploaded a new picture: Amos2.jpg 10 years, 6 months ago

Amos. My inmoov robot. Build in progress. I think i need to incorporate an i pod dock…..
SwanRobotics.com posted an update 10 years, 6 months ago

inMoov has a Chest.
- Gael Langevin replied 10 years, 6 months ago
  
  Beautifull !!
  Thanks for posting!
Peter Anderson posted an update 10 years, 6 months ago

Hi everyone, I started building the robot a couple of weeks ago. >
Gael Langevin posted an update 10 years, 7 months ago

Bob Houston made a modification to my neck mecanism, which is pretty cool.
Bob Houston posted an update 10 years, 7 months ago

Here is a video of a new neck joint for InMoov >
Animatronica posted an update 10 years, 7 months ago

Just finished our project the Animatronic Arm.
A mechanical arm, which repeats all movements of a human arm in real time.
Hope you guys like it!
http://www.animatronica.at
SwanRobotics.com posted an update 10 years, 7 months ago

Progress on my InMoov robot.
- Gael Langevin replied 10 years, 7 months ago
  
  Very good progress!
  You didn’t want to use the latest PistonClaviV3 which are less fragile?
  The one you have will do the job, but they might weaken after sometime
  - Gael Langevin replied 10 years, 7 months ago
    
    Wooo almost there aren’t you!!
  - SwanRobotics.com replied 10 years, 7 months ago
    
    I had the PistonClavi already done a while ago. When they break I take the new ones.
    
    I am almost there.
John-D's profile was updated 10 years, 7 months ago
SwanRobotics.com posted an update 10 years, 7 months ago

Why does it take so long?
- Gael Langevin replied 10 years, 7 months ago
  
  Ahaha nice, it reminds me a video that Bob did:
RentaPrinta posted an update 10 years, 7 months ago

Hand Update and Head Update with eyes
- Gael Langevin replied 10 years, 7 months ago
  
  Very good job on the hands and head!
  You got a very good finish for the hands as well. Will you spray the head or keep it with the Primer spray?
  Super!
  - RentaPrinta replied 10 years, 6 months ago
    
    Hello Gael,
    
    late i will spray on the head normal varnish for the end clear varnish – like my hands.
RentaPrinta posted an update 10 years, 7 months ago

Part 2
RentaPrinta posted an update 10 years, 7 months ago

Hand 95 % finsih >
- amby replied 10 years, 7 months ago
  
  hello do you use acetone?and what is the material grey in end fingers? thank you amby
  - RentaPrinta replied 10 years, 7 months ago
    
    Hello Amby,
    
    no i printed in 100% PLA so Acetone not helps me. I use “superglue” or “one-second glue” to fix the parts. But for the Hands i don´t need it because the finger part give in one part:
    - RentaPrinta replied 10 years, 7 months ago
      
      http://www.thingiverse.com/thing:753941
      
      And the end of the Finger are Gaels Finger tips / tops in Silicon
      
      http://www.inmoov.fr/silicone-finger-tip-mold/
      or
      http://www.wevolver.com/gael.langevin/inmoov-robot/finger-tip-cover
      
      I hope i could help you!!!
      
      Boris / RentaPrina
    - amby replied 10 years, 7 months ago
      
      hello boris
      thank you for answer me
      i find your print so nice
      have you do a tutorial for explaine how you do
      i am very surprising
      your hand is like actetone how you do?
      thank you amby
      
      RentaPrinta replied 10 years, 7 months ago
      
      Hello Amby,
      
      like i said i printed in 100% PLA and then i polish the printed part. I will make a Tutorial how to print and polish PLA and how to use “superglue” and “primmer-spray”.
      
      Boris
- Gael Langevin replied 10 years, 7 months ago
  
  Very nice job on the surface finish of your PLA.
  A tutorial for other builders on the process to polish the PLA would certainly help.
  I’m guessing you do a primer spray with a paint finish, no?
SwanRobotics.com posted an update 10 years, 7 months ago

More parts for my inMoov robot.
- Gael Langevin replied 10 years, 7 months ago
  
  cool progress!
Rayko Toshev posted an update 10 years, 7 months ago

>
- Gael Langevin replied 10 years, 7 months ago
  
  GREAT !! Want to see it move!
RentaPrinta posted an update 10 years, 7 months ago

Part 2
- Gael Langevin replied 10 years, 7 months ago
  
  Hey very clean work!! What did you spray on it? Polyester car filer?
  I see, you did close the holes around the mouth. Nice job and keep us posted!!
  - RentaPrinta replied 10 years, 7 months ago
    
    I use white prime for all material.
    
    I can tell you what work it was:
    
    1. I printed some parts together – like you know
    2. i use “one-second glue” to put the parts together
    (that i will get one part)
    3. i use gast ( german “gips”) – then i drag the head
    4. i spray with primer.
    5. again drag the head
    6. from 3. to 5. i think 10 times.
    
    So after 2…[Read more]
  - RentaPrinta replied 10 years, 7 months ago
    
    PS: I forgot one important info:
    
    I printed all parts in PLA in 100% with a Ultimaker 2 in 0.1 layer thickness with 50 mm/s . So i one way it take a while, but on the other hand i have the possibilty to polish/drag/grind the part or cut small pieces away.
RentaPrinta posted an update 10 years, 7 months ago

Inmoov Head before get a color shower 😉
ANDRES posted an update 10 years, 8 months ago

Of course, no problem translating.
I have already inmoov with head, torso, back and arm … and I have the kinetic and arduino I’m hoping to nervo set + soldering components to start as soon as servos have’ll ask assemble and develop
I mean that not only I am anxious to ride, I caught your enthusiasm and creativity to a future developer of…[Read more]
Gilles White uploaded a new picture: DSC09809.JPG 10 years, 8 months ago
- Jacques replied 7 years, 8 months ago
  
  Cool
Gilles White uploaded a new picture: DSC09805.JPG 10 years, 8 months ago

Not finish yet but promissing
- Jacques replied 7 years, 8 months ago
  
  Tres cool
SwanRobotics.com posted an update 10 years, 8 months ago

Printed some parts this weekend of the right arm.
- Gael Langevin replied 10 years, 8 months ago
  
  nice pieces! Do you let your printer run at night? To gain time it what I do, but my printer is so hacked that it is pretty reliable.
  I cross my fingers
  - SwanRobotics.com replied 10 years, 8 months ago
    
    Hi Gael, thanks for the complements. My Ultimaker is pretty reliable and almost never fails the print when I keep a close watch on the first layers. I don’t print at night because of the noise. I hear everything, when I am asleep.
ANDRES posted an update 10 years, 8 months ago

>
- Gael Langevin replied 10 years, 8 months ago
  
  Hey a new member, welcome to the white and red InMoov!
ANDRES posted an update 10 years, 8 months ago

hola a todos,uno más que se une al grupo
>
- Gael Langevin replied 10 years, 8 months ago
  
  Hi new member, can you Google translate to English before posting? It will save us all some time.
Gael Langevin posted an update 10 years, 8 months ago

Но главным детищем Яна стал «InMoov». Это робот, напечатанный на 3D принтере с программным кодом управления, взятым из «open source».
InMoov build by Ian, a Russian student.
SwanRobotics.com posted an update 10 years, 8 months ago

It was a productive weekend.
- Gael Langevin replied 10 years, 8 months ago
  
  Ultimaker2, correct?
  Clean prints!
  - SwanRobotics.com replied 10 years, 8 months ago
    
    Thanks Gael,
    It’s actually the Ultimaker original, but with a heated bed.
Thomas Wurm posted an update 10 years, 8 months ago

at the time I am working on a servo electronics for stronger dc geared motors
for the legs because normal servos are weak.
based on an arduino nano and a powerful h-bridge. can operate for motors up to 30A
the circuit is driven as a normal servo, the design is completed the circuit but the software not quite.
but unfortunately I have a lot to do…[Read more]
- Gael Langevin replied 10 years, 8 months ago
  
  time that is…
  Let us see pictures when you have some
Load More activity