Great! I always enjoy videos, specially when they are comic!
By the way great progress Quai-Lab

Beautifull !!
Thanks for posting!

Very good progress!
You didn’t want to use the latest PistonClaviV3 which are less fragile?
The one you have will do the job, but they might weaken after sometime

Ahaha nice, it reminds me a video that Bob did:

Very good job on the hands and head!
You got a very good finish for the hands as well. Will you spray the head or keep it with the Primer spray?
Super!

hello do you use acetone?and what is the material grey in end fingers? thank you amby

Very nice job on the surface finish of your PLA.
A tutorial for other builders on the process to polish the PLA would certainly help.
I’m guessing you do a primer spray with a paint finish, no?

cool progress!

GREAT !! Want to see it move!

Hey very clean work!! What did you spray on it? Polyester car filer?
I see, you did close the holes around the mouth. Nice job and keep us posted!!

nice pieces! Do you let your printer run at night? To gain time it what I do, but my printer is so hacked that it is pretty reliable.
I cross my fingers

Hey a new member, welcome to the white and red InMoov!

Hi new member, can you Google translate to English before posting? It will save us all some time.

Ultimaker2, correct?
Clean prints!

time that is…
Let us see pictures when you have some

hi,congratulations for your work 😉

Nice work, we are glad to see you around, you are from Dubai, correct?
Did you finally get to set yourself on the InMoov
builders map

You are welcome.

The protocol supports recording scenarios behavior on raspberi pi too…

Nice! Are you using MyrobotLab for the Arduino control with the Raspberi pi?

Interesting design. Do you think the robot will be able to walk? I think it is still possible to attach a tail for stability.

Wooo iii nice posts all together and great job with the screen and legs!
I think there is going to be interest with the legs you made.
Are you going to share the files as Open Source for others to download? If you do, let me know I wlll add the link in the InMoov derivatives.

Nice work, Alex! Could it walk?

Until only bend and rotate. Пока только сгибаются и вращаются.

hello alex nice your legs? have you do a blog with your pictures or video thank you amby

Very nice! Where did you get the lower stomach and legs?

I painted…

Hello Alex! Really nice you Legs! Slowly the InMoov become a complete Body. Do you think in the future you will have STL Files from your Legs?

And this Screen? Is this the « Under Test Touchscreen » or you invent this. What is the screen for?

Big Greetinxx from Boris from BERLIN

I am interested in the chest piece with the 7 inch screen. I have would like to do something very similar. Can you tell me where you found the STL or if you designed it?

It is my design. I can draw bumper for you, if i will be know size of your tablet in millimeters. I use screen for demonstration of photo and video.

Hi Alex, would you mind sharing the lower Stomach/Hips? does the Hip bend forward? This would be great for what I am setting up for inmoov to travel. Thank you.

Ahaha, nice time laps! Once you will have the bottom stomach parts, you will need to remove the head to make him fit.
Ready for Paris!!

Ready for heavy sunlight!! Looks good!

Ahaha, one has a too big head and the other a very tiny. I see the caps came alright. What do you think about the quality? It was difficult to find a good supplier which could do embroidery at a reasonable cost on a quality cap.

Very precise gesture, Markus!!
I had done a video where I was grabbing a ball via InMoov using the Kinect and it was very delicate to achieve, Ahaha

Interesting solution. Have you tried to take by two fingers some things?

Inmoov looks like something from Outer Limits.

Many will need to print, but the robot will go 🙂

Sooner or later, someone will make…

Woo ooo very cool !
Your InMoov is doing great progress!!
Thanks Damon for posting the pictures

InMoov DJ !!
After doing party, Robijn is now choosing his own MP3’s.
Are you using Random the way it is used for talking?

hello Merne i like you small inmoov so cute but what is this eyes? so nice

Hey cool ! Good job!!
I have been working on a small version as well and was planning to post the modified STL rather soon actually on the site. I printed only the torso and the right arm until now., but haven’t tested the actuation.
The eyes are nice indeed!

Great, how does it « feel » you stand on a certain side? Is it because of the sound or is it with infrared sensors?
Don’t the microphones get disturbed with the buzzing noise of the servos of the head?

Hi Markus, is the keyboard connected in bluetooth to the PC?
If yes, is it something you implemented into the script or is it implemented above MRL?

The sensors are connected to the Nervo shield board. The best is to add some resistances for each sensor connection.
https://dlnmh9ip6v2uc.cloudfront.net/r/500-500/assets/e/7/2/5/5/50eb2efece395ffb21000001.jpg

It is not because you bought the CD, that you can use it as a soundtrack for your video. Which is a delicate combination on your video.
By the way, it is interesting what you did with the EZ leds in the chest.
Nice work!

InMoov stealing the toy of R2D2 for Christmas, Merne are you trying to irritate the Star Wars fans?

Hey cool, you got a InMoov cap!!

Woohoo, nice work. No video for Christmas?

Very good job Markus!! Scary when InMoov lean sideway, I felt it was going to fall, ahaha.

Totaly effective. Grog suggested to get the opening of the jaw bigger according to the level of sound using software, that would be good too.

Great work!!

I know, it is a real pain. But I’m not able to fix it, only Leonardo could because I have no idea how to solve this. It is the « post » button that disappears.

Ahaha! I love it. When Robyn InMoov decides it’s party time, it’s intense in your home!!

Well the enclosure makes a huge difference. That is for sure.
My printer is also continuously closed, with no fan inside besides for cooling the extruder itself.

I love when it is fully DIY , it is so much in opposition to the « SO » technical approach of a 3D printer.

Great progress! I’m wondering why the arm suddenly falls down… Did you get a broken tooth on your gear shoulder?

Thanks for posting.

Thanks for sharing your infos.

Very nice Markus! Using a wide screen is good, I have chosen a much smaller screen to be mounted on the Odroid U3 and it is a bit hard to read on it.
Very interesting way of connecting the arms, I like the hdmi cables. What power supply do you use for the servos, Others might be interested about that.
Thanks for this instructive video!!!

Very beautiful design. We would like the photos with comments. You come up with the usage HDMI cable very nice.

top stomach

Great! have you been able to set it as default positions following the recommendations I posted recently on the tutorial? It looks like it !
One question, you haven’t printed the bicep covers, is it because you like it this way?
Just to say, the bicep covers, once glued to the structure really helps reinforcing. It greatly helps avoiding…En afficher davantage

Wow cool !!
The big screen in the background is nice for to work. Are you using MyRobotLab to do the visual tracking?

CYS model S8218
XQ-S4020D
Did both servos fit without modifications? Some builders are having trouble ordering my recommended servos.

so the problem with the right hand is fixt the servo now is in the right position but the problem with the rigt sholder neutral position need a bit time, make a new holder for a rectangular pot

You can use the settings with a script, see the settings for the hand
Here is a minimal script:
https://github.com/MyRobotLab/pyrobotlab/commit/9eb96ed1d094b23f5bfbce843251f81d225b3e8b#diff-76
Here is my full script:
https://github.com/MyRobotLab/pyrobotlab/commit/9eb96ed1d094b23f5bfbce843251f81d225b3e8b#diff-70

i killed the jaw servo in my first test but i replaced it in this video

What servo did you use for the jaw? I have burned a few of them, MG995, MG946R, MG996R… The torque needed to action the jaw, and the movement repetition cause great stress on the servo. Bob Houston has been using a HS-311 servo since he started his built and says he never had to replace it.
Might be worth trying.