Site-Wide Activity

bobjacon uploaded a new picture: Bottom of an office… il y a 10 ans et 7 mois

Took the seat off of an old office chair. This will act as a base for the torso to get mounted to. I added an adjustable metal pole to this stand that you can see in another picture.
bobjacon uploaded a new picture: InMOOV meet Bob J il y a 10 ans et 7 mois

The start of a new friendship!
- Gael Langevin replied il y a 10 ans et 7 mois
  
  A bit of Photoshop here and there, ahaha.
  That’s the way to get the InMoov logo turned in the correct position.
bobjacon uploaded a new picture: Torso stand il y a 10 ans et 7 mois

Stand made from the bottom of an office chair and a metal adjustable height pole.
bobjacon uploaded a new picture: Front of torso view il y a 10 ans et 7 mois

Here is a view of the front of torso. I have it mounted on a temporary pole until I get further along.
bobjacon uploaded a new picture: Back of torso il y a 10 ans et 7 mois

Here is the back of the torso view
- Gael Langevin replied il y a 10 ans et 7 mois
  
  Great!
Bob a publié une note il y a 10 ans et 8 mois

Just purchased a 3D printer based on Makerbot Replicator 2X called PowerSpec 3D Pro. I hope to make some great progress now!
- Gael Langevin replied il y a 10 ans et 8 mois
  
  Nice, let us see your progress in pictures when you start to print InMoov.
dougbrion uploaded a new picture: FACE.jpg il y a 10 ans et 8 mois
- Gael Langevin replied il y a 10 ans et 8 mois
  
  Nice prints!
  - Douglas replied il y a 10 ans et 8 mois
    
    Thanks Gael!! Hopefully the whole of Inmoov will look like that when complete
Douglas a publié une note il y a 10 ans et 8 mois

Inmoov is starting to come together!
- Gael Langevin replied il y a 10 ans et 8 mois
  
  cool man! Ready for sun!
  - Gael Langevin replied il y a 10 ans et 8 mois
    
    Did you start playing with the Nervo board?
    - Douglas replied il y a 10 ans et 8 mois
      
      I have indeed….the soldering and wiring has begun 😉
      
      Gael Langevin replied il y a 10 ans et 7 mois
      
      To attach the Arduino in the back, there is some casing available on Thingiverse. Make sure you still can add the Nervo board. Also try to place them like I did, because if you want to be able to use the files I will publish for the back of InMoov.
Sebastien a publié une note il y a 10 ans et 8 mois

Hello,
Is somebody try voices for inmoov comming from Voxygen French cie ?
- zape86 replied il y a 10 ans et 8 mois
  
  Yes, on https://voxygen.fr/
  like the bicool voice 😉
Sebastien uploaded a new picture: inmoov-introspectio… il y a 10 ans et 8 mois
Le profil de Conroy Bradley a été mis à jour il y a 10 ans et 9 mois
Bob a publié une note il y a 10 ans et 9 mois

Successful test of inMOOV hand using EZRobot controller board. >
- Gael Langevin replied il y a 10 ans et 8 mois
  
  Nice! Do you plan to make the whole robot?
- Bob replied il y a 10 ans et 8 mois
  
  Hi Gael, Yes I do plan on printing the whole robot. Up until now, I have been using our public library’s 3D printer and decided to purchase my own. I did not want to spend the high cost of a MakerBot 2X Replicator which is what the library has. I have found a printer based on MakerBot called PowerSpec 3D Pro with dual extruders that handles ABS…En afficher davantage
Bob a publié une note il y a 10 ans et 9 mois

Getting ready to try out the servo motors using EZ-Robot controller…
Mirkosoft a publié une note il y a 10 ans et 9 mois

My inmoov Jarvis
Mirkosoft uploaded a new picture: Last update il y a 10 ans et 9 mois
- Mirkosoft replied il y a 10 ans et 9 mois
  - Mirkosoft replied il y a 10 ans et 9 mois
    
    My inmoov Jarvis
- Mirkosoft replied il y a 10 ans et 9 mois
Mirkosoft a publié une note il y a 10 ans et 9 mois

>
Peter Anderson uploaded a new picture: image.jpg il y a 10 ans et 9 mois

Latest bit of work. Smoothing and finishing.
Peter Anderson uploaded a new picture: image.jpg il y a 10 ans et 9 mois

A bit more work done.
Peter Anderson a publié une note il y a 10 ans et 10 mois

More progress….

>
Gael Langevin a publié une note il y a 10 ans et 10 mois

Some time ago I was in Poitiers, invited for the Gamers Assembly by Quai-Lab. I met some young fellows that wanted to build legs for InMoov following good dimensions and my 3d view concept. Here is what they have achieved so far, they started to print them as…En afficher davantage
- RentaPrinta replied il y a 10 ans et 10 mois
  
  Really cool!
  
  I hope and i pray that our Inmoov will get legs!!!
  - Zungara replied il y a 10 ans et 9 mois
    
    Really cool!
Gael Langevin a publié une note il y a 10 ans et 10 mois

InMoov with realistics eyes by Peter Anderson
amby a publié une note il y a 10 ans et 10 mois

very nice your legs
it is possible to see a video work
thank you
Alex a publié une note il y a 10 ans et 10 mois

City Blagoveshchensk. Space Festival for young engineers in Russia. Cosmodrome « Vostochny » ( « Eastern Spaceport ») >
- Gael Langevin replied il y a 10 ans et 10 mois
  
  We certainly want more pictures!! Great sytem for stand alone as well.
  The legs seem a bit small in proportion, but it looks darn good altogether!! I bet the crowd appreciated.
  - Alex replied il y a 10 ans et 10 mois
    
    Thanks Gael. legs will be longer. More photo after Geek Picnic in Moscow. My robot will be read Dostoyevsky on this show. I hope that everything will be fine.
Sebastien a publié une note il y a 10 ans et 10 mois

>Airwin first video…

Airwin InMoov Robot first video – YouTube

https://youtu.be/yPF8UvYGhg8

First test of our InMoov Robot. Juste a funny video on the first parts already done on this project.
Sebastien a publié une note il y a 10 ans et 10 mois

Airwin InMoov robot first video
- Gael Langevin replied il y a 10 ans et 10 mois
  
  Great! I always enjoy videos, specially when they are comic!
  By the way great progress Quai-Lab
Peter Anderson uploaded a new picture: Amos2.jpg il y a 10 ans et 10 mois

Amos. My inmoov robot. Build in progress. I think i need to incorporate an i pod dock…..
SwanRobotics.com a publié une note il y a 10 ans et 10 mois

inMoov has a Chest.
- Gael Langevin replied il y a 10 ans et 10 mois
  
  Beautifull !!
  Thanks for posting!
Peter Anderson a publié une note il y a 10 ans et 10 mois

Hi everyone, I started building the robot a couple of weeks ago. >
Gael Langevin a publié une note il y a 10 ans et 10 mois

Bob Houston made a modification to my neck mecanism, which is pretty cool.
Bob Houston a publié une note il y a 10 ans et 10 mois

Here is a video of a new neck joint for InMoov >
Animatronica a publié une note il y a 10 ans et 10 mois

Just finished our project the Animatronic Arm.
A mechanical arm, which repeats all movements of a human arm in real time.
Hope you guys like it!
http://www.animatronica.at
SwanRobotics.com a publié une note il y a 10 ans et 10 mois

Progress on my InMoov robot.
- Gael Langevin replied il y a 10 ans et 10 mois
  
  Very good progress!
  You didn’t want to use the latest PistonClaviV3 which are less fragile?
  The one you have will do the job, but they might weaken after sometime
  - Gael Langevin replied il y a 10 ans et 10 mois
    
    Wooo almost there aren’t you!!
  - SwanRobotics.com replied il y a 10 ans et 10 mois
    
    I had the PistonClavi already done a while ago. When they break I take the new ones.
    
    I am almost there.
Le profil de John-D a été mis à jour il y a 10 ans et 10 mois
SwanRobotics.com a publié une note il y a 10 ans et 10 mois

Why does it take so long?
- Gael Langevin replied il y a 10 ans et 10 mois
  
  Ahaha nice, it reminds me a video that Bob did:
RentaPrinta a publié une note il y a 10 ans et 11 mois

Hand Update and Head Update with eyes
- Gael Langevin replied il y a 10 ans et 10 mois
  
  Very good job on the hands and head!
  You got a very good finish for the hands as well. Will you spray the head or keep it with the Primer spray?
  Super!
  - RentaPrinta replied il y a 10 ans et 10 mois
    
    Hello Gael,
    
    late i will spray on the head normal varnish for the end clear varnish – like my hands.
RentaPrinta a publié une note il y a 10 ans et 11 mois

Part 2
RentaPrinta a publié une note il y a 10 ans et 11 mois

Hand 95 % finsih >
- amby replied il y a 10 ans et 11 mois
  
  hello do you use acetone?and what is the material grey in end fingers? thank you amby
  - RentaPrinta replied il y a 10 ans et 11 mois
    
    Hello Amby,
    
    no i printed in 100% PLA so Acetone not helps me. I use « superglue » or « one-second glue » to fix the parts. But for the Hands i don´t need it because the finger part give in one part:
    - RentaPrinta replied il y a 10 ans et 11 mois
      
      http://www.thingiverse.com/thing:753941
      
      And the end of the Finger are Gaels Finger tips / tops in Silicon
      
      http://www.inmoov.fr/silicone-finger-tip-mold/
      or
      http://www.wevolver.com/gael.langevin/inmoov-robot/finger-tip-cover
      
      I hope i could help you!!!
      
      Boris / RentaPrina
    - amby replied il y a 10 ans et 11 mois
      
      hello boris
      thank you for answer me
      i find your print so nice
      have you do a tutorial for explaine how you do
      i am very surprising
      your hand is like actetone how you do?
      thank you amby
      
      RentaPrinta replied il y a 10 ans et 11 mois
      
      Hello Amby,
      
      like i said i printed in 100% PLA and then i polish the printed part. I will make a Tutorial how to print and polish PLA and how to use « superglue » and « primmer-spray ».
      
      Boris
- Gael Langevin replied il y a 10 ans et 10 mois
  
  Very nice job on the surface finish of your PLA.
  A tutorial for other builders on the process to polish the PLA would certainly help.
  I’m guessing you do a primer spray with a paint finish, no?
SwanRobotics.com a publié une note il y a 10 ans et 11 mois

More parts for my inMoov robot.
- Gael Langevin replied il y a 10 ans et 10 mois
  
  cool progress!
Rayko Toshev a publié une note il y a 10 ans et 11 mois

>
- Gael Langevin replied il y a 10 ans et 10 mois
  
  GREAT !! Want to see it move!
RentaPrinta a publié une note il y a 10 ans et 11 mois

Part 2
- Gael Langevin replied il y a 10 ans et 11 mois
  
  Hey very clean work!! What did you spray on it? Polyester car filer?
  I see, you did close the holes around the mouth. Nice job and keep us posted!!
  - RentaPrinta replied il y a 10 ans et 11 mois
    
    I use white prime for all material.
    
    I can tell you what work it was:
    
    1. I printed some parts together – like you know
    2. i use « one-second glue » to put the parts together
    (that i will get one part)
    3. i use gast ( german « gips ») – then i drag the head
    4. i spray with primer.
    5. again drag the head
    6. from 3. to 5. i think 10 times.
    
    So after 2…En afficher davantage
  - RentaPrinta replied il y a 10 ans et 11 mois
    
    PS: I forgot one important info:
    
    I printed all parts in PLA in 100% with a Ultimaker 2 in 0.1 layer thickness with 50 mm/s . So i one way it take a while, but on the other hand i have the possibilty to polish/drag/grind the part or cut small pieces away.
RentaPrinta a publié une note il y a 10 ans et 11 mois

Inmoov Head before get a color shower 😉
ANDRES a publié une note il y a 10 ans et 11 mois

Of course, no problem translating.
I have already inmoov with head, torso, back and arm … and I have the kinetic and arduino I’m hoping to nervo set + soldering components to start as soon as servos have’ll ask assemble and develop
I mean that not only I am anxious to ride, I caught your enthusiasm and creativity to a future developer of…En afficher davantage
Gilles White uploaded a new picture: DSC09809.JPG il y a 10 ans et 11 mois
- Jacques replied il y a 7 ans et 11 mois
  
  Cool
Gilles White uploaded a new picture: DSC09805.JPG il y a 10 ans et 11 mois

Not finish yet but promissing
- Jacques replied il y a 7 ans et 11 mois
  
  Tres cool
SwanRobotics.com a publié une note il y a 10 ans et 11 mois

Printed some parts this weekend of the right arm.
- Gael Langevin replied il y a 10 ans et 11 mois
  
  nice pieces! Do you let your printer run at night? To gain time it what I do, but my printer is so hacked that it is pretty reliable.
  I cross my fingers
  - SwanRobotics.com replied il y a 10 ans et 11 mois
    
    Hi Gael, thanks for the complements. My Ultimaker is pretty reliable and almost never fails the print when I keep a close watch on the first layers. I don’t print at night because of the noise. I hear everything, when I am asleep.
ANDRES a publié une note il y a 11 ans

>
- Gael Langevin replied il y a 10 ans et 12 mois
  
  Hey a new member, welcome to the white and red InMoov!
ANDRES a publié une note il y a 11 ans

hola a todos,uno más que se une al grupo
>
- Gael Langevin replied il y a 10 ans et 12 mois
  
  Hi new member, can you Google translate to English before posting? It will save us all some time.
Gael Langevin a publié une note il y a 11 ans

Но главным детищем Яна стал «InMoov». Это робот, напечатанный на 3D принтере с программным кодом управления, взятым из «open source».
InMoov build by Ian, a Russian student.
SwanRobotics.com a publié une note il y a 11 ans

It was a productive weekend.
- Gael Langevin replied il y a 11 ans
  
  Ultimaker2, correct?
  Clean prints!
  - SwanRobotics.com replied il y a 11 ans
    
    Thanks Gael,
    It’s actually the Ultimaker original, but with a heated bed.
Thomas Wurm a publié une note il y a 11 ans

at the time I am working on a servo electronics for stronger dc geared motors
for the legs because normal servos are weak.
based on an arduino nano and a powerful h-bridge. can operate for motors up to 30A
the circuit is driven as a normal servo, the design is completed the circuit but the software not quite.
but unfortunately I have a lot to do…En afficher davantage
- Gael Langevin replied il y a 11 ans
  
  time that is…
  Let us see pictures when you have some
arjun m a publié une note il y a 11 ans

I have started building the Inmoov robot, finished almost of full left hand , chest, head ,eyes . >
- michele replied il y a 11 ans
  
  hi,congratulations for your work 😉
  - arjun m replied il y a 11 ans
    
    Thank you silvester 🙂
- Gael Langevin replied il y a 11 ans
  
  Nice work, we are glad to see you around, you are from Dubai, correct?
  Did you finally get to set yourself on the InMoov
  builders map
  - arjun m replied il y a 11 ans
    
    Thank you Gael .
    Yes i am from Dubai. I tried to add in map , and it was showing error , so i couldn’t add myself , can you help me to add in map ?
    - Gael Langevin replied il y a 10 ans et 7 mois
      
      try to add yourself on the map again, It should probably work now
arjun m a publié une note il y a 11 ans

Hai everyone ,

Thanks gael for the creating the account for me.

arjun >
- Gael Langevin replied il y a 11 ans
  
  You are welcome.
Gael Langevin a publié une note il y a 11 ans

Here is Bob’s base for his InMoov. Nice and clean job, we can’t wait to see it moving around a little further.
Bob Houston a publié une note il y a 11 ans

Here’s a look at the new base for my InMoov
Gael Langevin a publié une note il y a 11 ans

Here is another use of InMoov in Russia, University Kharkov Ukraine.
http://goodnewsagency.blogspot.fr/2015/03/robot.html
Gael Langevin a publié une note il y a 11 ans

I created a tutorial for the Nervo board available on the shop, using some of Martens pictures, to help you during your assembly.

Nervo Board tutorial

I sure hope this helps.
Markus a publié une note il y a 11 ans

Robyn Inmoov is coming to Maker Faire Paris – YouTube

https://www.youtube.com/watch?v=H4k32QGhx9s
Alexander Semochkin a publié une note il y a 11 ans

The first tests of the network protocol « Network – RaspberyPi – Arduinos » with Russian voice. The protocol supports multiple Arduinos connected to RaspberyPi.
- Alexander Semochkin replied il y a 11 ans
  
  The protocol supports recording scenarios behavior on raspberi pi too…
- Gael Langevin replied il y a 11 ans
  
  Nice! Are you using MyrobotLab for the Arduino control with the Raspberi pi?
  - Alexander Semochkin replied il y a 11 ans
    
    We are not using Myrobotlab for various reasons. All software is written by us. When we finish, we plan to put it into Open source.
    - Gael Langevin replied il y a 11 ans
      
      I see, is it also Python written?
      
      Alexander Semochkin replied il y a 11 ans
      
      Only java. And C++ on Arduinos 🙂
      
      Gael Langevin replied il y a 11 ans
      
      Oh Okay, I got it.
Le profil de RentaPrinta a été mis à jour il y a 11 ans
Alex a publié une note il y a 11 ans

design
- Alexander Semochkin replied il y a 11 ans
  
  Interesting design. Do you think the robot will be able to walk? I think it is still possible to attach a tail for stability.
- Gael Langevin replied il y a 11 ans
  
  Wooo iii nice posts all together and great job with the screen and legs!
  I think there is going to be interest with the legs you made.
  Are you going to share the files as Open Source for others to download? If you do, let me know I wlll add the link in the InMoov derivatives.
Alex a publié une note il y a 11 ans

New bumper
- Alexander Semochkin replied il y a 11 ans
  
  Nice work, Alex! Could it walk?
- Alex replied il y a 11 ans
  
  Until only bend and rotate. Пока только сгибаются и вращаются.
- amby replied il y a 11 ans
  
  hello alex nice your legs? have you do a blog with your pictures or video thank you amby
- Simon replied il y a 11 ans
  
  Very nice! Where did you get the lower stomach and legs?
- Alex replied il y a 11 ans
  
  I painted…
- RentaPrinta replied il y a 11 ans
  
  Hello Alex! Really nice you Legs! Slowly the InMoov become a complete Body. Do you think in the future you will have STL Files from your Legs?
  
  And this Screen? Is this the « Under Test Touchscreen » or you invent this. What is the screen for?
  
  Big Greetinxx from Boris from BERLIN
- dcochran replied il y a 11 ans
  
  I am interested in the chest piece with the 7 inch screen. I have would like to do something very similar. Can you tell me where you found the STL or if you designed it?
- Alex replied il y a 11 ans
  
  It is my design. I can draw bumper for you, if i will be know size of your tablet in millimeters. I use screen for demonstration of photo and video.
  - Gael Langevin replied il y a 11 ans
    
    Hey cool picture on the screen, Ahaha!
- Simon replied il y a 11 ans
  
  Hi Alex, would you mind sharing the lower Stomach/Hips? does the Hip bend forward? This would be great for what I am setting up for inmoov to travel. Thank you.
Alex a publié une note il y a 11 ans

New bumper
Alex a publié une note il y a 11 ans

Nervo boards
Alex a publié une note il y a 11 ans

Nervo boards. With boards robot working very well !!!
Alex uploaded a new picture: Nervo board il y a 11 ans
Alex uploaded a new picture: DSC00243.JPG il y a 11 ans
Alex uploaded a new picture: Nervo board il y a 11 ans

Nervo board. With boards robot working very well !!!
Simon a publié une note il y a 11 ans et 1 mois

Mini-Bro has a new name, \ »Simon\ »
Markus a publié une note il y a 11 ans et 1 mois

Robyn Inmoov testing the suitcase. – YouTube

https://www.youtube.com/watch?v=_Ey2M_NleWw
- Gael Langevin replied il y a 11 ans et 1 mois
  
  Ahaha, nice time laps! Once you will have the bottom stomach parts, you will need to remove the head to make him fit.
  Ready for Paris!!
  - Markus replied il y a 11 ans et 1 mois
    
    thanks!
    yes i am ready for paris!
jhack a publié une note il y a 11 ans et 1 mois

InMoov got his cap today :
- Gael Langevin replied il y a 11 ans et 1 mois
  
  Ready for heavy sunlight!! Looks good!
Simon a publié une note il y a 11 ans et 1 mois

One more picture, Mo is being worked on.
- Gael Langevin replied il y a 11 ans et 1 mois
  
  Ahaha, one has a too big head and the other a very tiny. I see the caps came alright. What do you think about the quality? It was difficult to find a good supplier which could do embroidery at a reasonable cost on a quality cap.
  - Simon replied il y a 11 ans et 1 mois
    
    I think the quality is great, not like most caps I see today. Well built!
  - Simon replied il y a 11 ans et 1 mois
    
    BTY, do you know when the lower stomach / hips will be posted?
    
    Thank you.
Simon a publié une note il y a 11 ans et 1 mois

Mini-Bro and cap. It’s too big for Mini-Bro. Lol
Mirkosoft uploaded a new picture: WP_20150215_11_36_1… il y a 11 ans et 1 mois
Markus a publié une note il y a 11 ans et 1 mois

Robyn Inmoov microphones/sound sensors. – YouTube

https://www.youtube.com/watch?v=hGIz0PFJVzU
Mirkosoft a publié une note il y a 11 ans et 1 mois
Markus a publié une note il y a 11 ans et 1 mois

https://www.youtube.com/watch?v=D_CoV7dM9XU
- Gael Langevin replied il y a 11 ans et 1 mois
  
  Very precise gesture, Markus!!
  I had done a video where I was grabbing a ball via InMoov using the Kinect and it was very delicate to achieve, Ahaha
Markus a publié une note il y a 11 ans et 1 mois

Robyn Inmoov is trying new finger servos. – YouTube

https://www.youtube.com/watch?v=PwVhgX9ySFA
- Alexander Semochkin replied il y a 11 ans et 1 mois
  
  Interesting solution. Have you tried to take by two fingers some things?
Gael Langevin a publié une note il y a 11 ans et 2 mois

For the fun, what if we print a big hexapod for InMoov
- Simon replied il y a 11 ans et 1 mois
  
  Inmoov looks like something from Outer Limits.
- Alexander Semochkin replied il y a 11 ans et 1 mois
  
  Many will need to print, but the robot will go 🙂
- Alexander Semochkin replied il y a 11 ans et 1 mois
  
  Sooner or later, someone will make…
  - Gael Langevin replied il y a 11 ans et 1 mois
    
    yeah that is likely possible!
    - Alexander Semochkin replied il y a 11 ans et 1 mois
      
      Gael, what about anthropomorphic legs?
      What if to attach the tail with the wheels to the back the of the robot. The tail will confer resistance. The wheels can spin in one direction only.
      
      Alexander Semochkin replied il y a 11 ans et 1 mois
      
      https://groups.google.com/group/inmoov/attach/55960cb8ff013a59/IMG-20150118-WA0002.jpg?part=0.2&authuser=0&view=1
      
      Gael Langevin replied il y a 11 ans et 1 mois
      
      Ah yes I had seen your post, but I couldn’t find in which topic it was posted.
      It is a good idea of course, as a temporary feature.
      I was thinking of using an assisting walker for the beginning.
      And then when we figure a better way for the robot to walk, we could remove it.
      And let him fall.…En afficher davantage
Damon Eddy a publié une note il y a 11 ans et 2 mois

It’s been a busy few months.

Finished assembling the TopStomach, now just waiting for Gael to release the lower parts.

Working on some linear drive designs for some legs, tests are looking good so far.

Two more servos to modify & I will have both arms working again.

Next week I’m hoping to attach my new wrist design. By moving the rotation…En afficher davantage
- Gael Langevin replied il y a 11 ans et 2 mois
  
  Woo ooo very cool !
  Your InMoov is doing great progress!!
  Thanks Damon for posting the pictures
Gael Langevin a publié une note il y a 11 ans et 2 mois

InMoov Bartender. Very cool video! Richard has done a very good job with his InMoov Andrew.

Our iMoov Bartender – YouTube

http://youtu.be/7YvCuU4EWU8

Our Robot Bartender
Markus a publié une note il y a 11 ans et 2 mois

Robyn Inmoov is playing random mp3 files. – YouTube

https://www.youtube.com/watch?v=a21Ji_7t4G8
- Gael Langevin replied il y a 11 ans et 2 mois
  
  InMoov DJ !!
  After doing party, Robijn is now choosing his own MP3’s.
  Are you using Random the way it is used for talking?
  - Markus replied il y a 11 ans et 2 mois
    
    Take a look at the script. http://myrobotlab.org/content/robyn-inmoov-playing-random-mp3-files#new
Simon a publié une note il y a 11 ans et 2 mois

Inmoov Mini-Bro soon to meet EZ-Mo

The small hand is a challenge.
- amby replied il y a 11 ans et 2 mois
  
  hello Merne i like you small inmoov so cute but what is this eyes? so nice
  - Simon replied il y a 11 ans et 2 mois
    
    Hi Amby, thanks. The eyes I got from a site years ago, they are animatronic eyes. Here is one site, but if you google search you could find them cheaper.
    http://www.tech-optics.com/
    - amby replied il y a 11 ans et 2 mois
      
      thank you for your answer amby
- Gael Langevin replied il y a 11 ans et 2 mois
  
  Hey cool ! Good job!!
  I have been working on a small version as well and was planning to post the modified STL rather soon actually on the site. I printed only the torso and the right arm until now., but haven’t tested the actuation.
  The eyes are nice indeed!
Markus a publié une note il y a 11 ans et 3 mois

Robyn Inmoov starts listening.

Robyn Inmoov starts listening. – YouTube

https://www.youtube.com/watch?v=99SmBqZ5XOo
- Gael Langevin replied il y a 11 ans et 2 mois
  
  Great, how does it « feel » you stand on a certain side? Is it because of the sound or is it with infrared sensors?
  Don’t the microphones get disturbed with the buzzing noise of the servos of the head?
  - Markus replied il y a 11 ans et 2 mois
    
    it is the microphones!
    check out the script i am working on.
    http://myrobotlab.org/content/robyn-inmoov-starts-listening#comment-4780
Markus a publié une note il y a 11 ans et 3 mois

Robyn Inmoov mini keyboard.

Robyn Inmoov mini keyboard. – YouTube

https://www.youtube.com/watch?v=CqpHFdtmcEU
- Gael Langevin replied il y a 11 ans et 2 mois
  
  Hi Markus, is the keyboard connected in bluetooth to the PC?
  If yes, is it something you implemented into the script or is it implemented above MRL?
  - Markus replied il y a 11 ans et 2 mois
    
    there is a receiver in a usb port on the computer at the back of Robyn.
    http://www.kjell.com/sortiment/dator-kringutrustning/datortillbehor/tangentbord/tradlosa-tangentbord/plexgear-mediatrack-point-p98788
    and it works very good with MRL
Simon a publié une note il y a 11 ans et 3 mois

Finger Tip Sensors. Hi Gael, do you have any information on how to connect the sensors and or wiring besides the Assembly hand guild? I am not sure on what control board to uses.

Thank you.
Merne
- Gael Langevin replied il y a 11 ans et 2 mois
  
  The sensors are connected to the Nervo shield board. The best is to add some resistances for each sensor connection.
  https://dlnmh9ip6v2uc.cloudfront.net/r/500-500/assets/e/7/2/5/5/50eb2efece395ffb21000001.jpg
  - Gael Langevin replied il y a 11 ans et 2 mois
    
    // Flexiforce quick start example
    // Reads A0 every 100ms and sends voltage value over serial
    
    void setup()
    {
    // Start serial at 9600 baud
    Serial.begin(9600);
    }
    
    void loop()
    {
    // Read the input on analog pin 0:
    int sensorValue = analogRead(A0);
    
    // Convert the analog reading (which goes from 0 – 1023) to a voltage (0 – 5V):…En afficher davantage
Simon a publié une note il y a 11 ans et 3 mois

Some countries can not view this video, because Youtube says it is a copy right issue, I own the CD. They keep removing the video.
- Gael Langevin replied il y a 11 ans et 3 mois
  
  It is not because you bought the CD, that you can use it as a soundtrack for your video. Which is a delicate combination on your video.
  By the way, it is interesting what you did with the EZ leds in the chest.
  Nice work!
  - Simon replied il y a 11 ans et 3 mois
    
    Thanks Gael! I am using a RGB LED Array and bolted it inside the chest.
    BTY, any time frame as to when you might have the low hips for Inmoov? I know you hear this every day, but Thank you for sharing your awesome design!
Simon a publié une note il y a 11 ans et 3 mois

Happy late Christmas everyone.
- Gael Langevin replied il y a 11 ans et 3 mois
  
  InMoov stealing the toy of R2D2 for Christmas, Merne are you trying to irritate the Star Wars fans?
  - Simon replied il y a 11 ans et 3 mois
    
    Lol!
amby a publié une note il y a 11 ans et 3 mois

my birthday so happy
- Gael Langevin replied il y a 11 ans et 3 mois
  
  Hey cool, you got a InMoov cap!!
  - amby replied il y a 11 ans et 3 mois
    
    salut gael oui on m a fait cadeau de ta casquette je pensais ne pas l avoir et je l ai eu super content en plus elle est tip top comme j aime
Thomas Wurm a publié une note il y a 11 ans et 3 mois

we wish you a merry christmas
- Gael Langevin replied il y a 11 ans et 3 mois
  
  Woohoo, nice work. No video for Christmas?
  - Thomas Wurm replied il y a 11 ans et 3 mois
    
    Unfortunately I have little time at the moment and have some problems with the lighting conditions.
    My video has unfortunately become too dark
    greetings tom
    - Gael Langevin replied il y a 11 ans et 3 mois
      
      No worry, maybe you get a new camera with Christmas.
      🙂
Markus a publié une note il y a 11 ans et 3 mois

Robyn Inmoov is a little teapot – YouTube

https://www.youtube.com/watch?v=wq6bbteNWao
- Gael Langevin replied il y a 11 ans et 3 mois
  
  Very good job Markus!! Scary when InMoov lean sideway, I felt it was going to fall, ahaha.
Markus a publié une note il y a 11 ans et 3 mois

Robyn Inmoov synchronising move jaw to mp3 file. – YouTube

https://www.youtube.com/watch?v=n-HLPC93J3c
- Gael Langevin replied il y a 11 ans et 3 mois
  
  Totaly effective. Grog suggested to get the opening of the jaw bigger according to the level of sound using software, that would be good too.
Simon a publié une note il y a 11 ans et 4 mois

M erne – Google+

https://plus.google.com/111109287399531253320/posts/K3Aw3f7hpDb

M erne – Google+
- Gael Langevin replied il y a 11 ans et 3 mois
  
  Great work!!
Simon a publié une note il y a 11 ans et 4 mois

Hello all, I finely finished my Inmoov, I am waiting on a new board to get his head working and also printing right now his new neck, which is shorter for his head. Here is a video of his moves so far.

Thank you Gael for your great design and sharing it with the World!
Simon a publié une note il y a 11 ans et 4 mois

That should have be spelled Gael.
Simon a publié une note il y a 11 ans et 4 mois

Hi Gaek, I know this has be brought up before but I am unable to post. I hope you get this post.
- Gael Langevin replied il y a 11 ans et 3 mois
  
  I know, it is a real pain. But I’m not able to fix it, only Leonardo could because I have no idea how to solve this. It is the « post » button that disappears.
Markus a publié une note il y a 11 ans et 4 mois

Robyn Inmoov talking straight from the chip – YouTube

https://www.youtube.com/watch?v=OucN6ushHt0
Chuck a publié une note il y a 11 ans et 4 mois

Started to work on the Top Stomach, up to this point, everything is working great.
Simon a publié une note il y a 11 ans et 4 mois

I finely finished my Inmoov, I am not ready to post a video yet and need to first shorten the neck once I receive more filament to print. But here is a picture…

Thank you Gael, for your design and sharing it with the World!
amby a publié une note il y a 11 ans et 4 mois
Markus a publié une note il y a 11 ans et 4 mois

Robyn Inmoov having a party.

Robyn Inmoov having a party. – YouTube

https://www.youtube.com/watch?v=UtxHWxZDXe4

Disco dancer Robyn Inmoov.
- Gael Langevin replied il y a 11 ans et 4 mois
  
  Ahaha! I love it. When Robyn InMoov decides it’s party time, it’s intense in your home!!
Le profil de Chris L a été mis à jour il y a 11 ans et 4 mois
Gael Langevin a publié une note il y a 11 ans et 4 mois

Never heard of that one…

Robot Story Time
Thomas Wurm a publié une note il y a 11 ans et 4 mois

bicepscover printed with enclosure on the printer
- Gael Langevin replied il y a 11 ans et 4 mois
  
  Well the enclosure makes a huge difference. That is for sure.
  My printer is also continuously closed, with no fan inside besides for cooling the extruder itself.
Thomas Wurm a publié une note il y a 11 ans et 4 mois

bicepscover parts prited without enclosure
Thomas Wurm a publié une note il y a 11 ans et 4 mois

i solved the problem with printing bicepcovers with a quick and dirty solution, but i will build a woodenclosure for my printer
- Gael Langevin replied il y a 11 ans et 4 mois
  
  I love when it is fully DIY , it is so much in opposition to the « SO » technical approach of a 3D printer.
Taoni Xavier uploaded a new picture: IMG_20140203_173501… il y a 11 ans et 4 mois
Load More activity