With yolo, you can do this: http://myrobotlab.org/content/yolo-dnn-support-now-opencv

For face tracking, i use tracking service from MRL

oeilG = Runtime.create(« oeilG », « OpenCV »)
oeilG.setFrameGrabberType(« org.myrobotlab.opencv.SarxosFrameGrabber »)
oeilG = Runtime.start(« oeilG », « OpenCV »)
oeilG.setCameraIndex(0)
tracking =…En afficher davantage

Congratulations! What a beautifull base you made!!

No worrries Perry,,, i thought is was rather cool and worth sharing 🙂
P.S- I posted one more that is very interesting

you can download 2 versions of an stl file for the MRL logo here
https://www.dropbox.com/s/f3ksaz3s7l6peb3/mrl%20logo1.STL?dl=0
https://www.dropbox.com/s/83j98uht0sqzx7n/mrl%20logo2.STL?dl=0
let me know if you want them a different size or thickness
regards
geoff

Lol,,, next pic will be with Inmoov ,, I’m 35yo in this pic and i just turned 40 –,,, Still look the Same which is kinda weird – ,,lol

thank you, yes, I like the look, it’s still to be applied.

Thanks You Gaël, but all the credit goes to you.

Thanks Gael. Same to you. Cold outside!!!!!! That day it was a crisp -37 degrees C outside !!!

Thanks Lecagnois!

Your right,,, i just looked at some photos of the build process and Mr Gael just turns the piece around like you have,,,, so there should be a problem,,,,

BTW, where you get so nice schematic?
I was trying modify files using solidworks, but STL is not best format to edit for me

Yep,,, there so handy for testing new frames designs without having to spend a lot of money,,,, i’ve got x4 Arms in testing stages so that around $1200 if i had run real servos,, there only usefully for people like me he do a lot of Mod work on the Structural Frames –( but thought i would post them anyway)– almost got a printable gear drive and…En afficher davantage

Currently using PLA+ by Esun –,, its tough as hell ( flexible ) and it doesn’t swell like other filaments but getting a good surface finish took a while to tune-in,,,,, great for prototyping parts never have a first layer issues on cold beds and its cheap,,,,,, this is a pic of the Screw/Bolt Together Arm — got to some more mod work the B…En afficher davantage

Thanks Mindless!

Well, I am waiting for some components from AliExpress which need to be tested before release. Just for info this is already my third knee design, which all three were pretty different. R&D takes a long time and my problem is that I don’t only work on the legs.

Nice! Added to the derivatives:

InMoov parts and derivatives

No worries,,, I’ll download the new V3 Parts,,,,
I really should of checked that out first but it didn’t even occur to me to have a look for a updated part,,,, anyway cheers mate–,,

Cool,,,, that’s a useful bit of info,,
Anyone put Inmoov on the Scales yet to get rough idea of the complete weight ?

I Tried, but the Ball joint was very limited in it’s movement, so I reverted to using 3D printed parts.

Mine actually made themselves two parts after a couple of days use. No CAD needed. I wanted to preserve the original geometry because it offers about the right range of travel. So I glued them back on and instead of a short bolt I thru-drilled the hole and placed a much longer bolt through it. The bolt passes through the neck and into the…En afficher davantage

Nice prints!
As you know I print InMoov in ABS, and try to print everything without support.
I print the worm gear and bicep piston parts without support.
I never run fans in my printer to cool down the parts, but I have set an aquarium pump with a tiny tube that travels all the way to the printing head, which then blows precisely an air stream…En afficher davantage