Mes amis – Activités – Julian

Steve Cole a publié une note il y a 8 ans et 9 mois

First arm now on a base and EZB waiting to be connected

Perry replied il y a 8 ans et 9 mois

Great Steve,
Cna you share some details on your tendons? They appear to be running through little tubes. How is the wrist rotation?
- Steve Cole replied il y a 8 ans et 9 mois
  
  Wrist rotation is fine, the tubes are ptfe tubing, this is the same tube used in my hot end on my 3 d printer, they seem to be working well
rodolfo rojas replied il y a 8 ans et 9 mois

Fantastic work and congrats 🙂 .
Could you upload photos of cables connected to the ez-b board? please
rodolfo rojas replied il y a 8 ans et 9 mois

I don´t know what’s happen, my comments disappeared

Mindless a publié une note il y a 8 ans et 10 mois

Hello Guys/ Girls -Mr Gail
Chest Plates Have been Uploaded in 3 diferrent cut Patterns
SketchUp File is Included for Mod work
enjoy!!
http://www.thingiverse.com/thing:2175499

Steve Cole a publié une note il y a 8 ans et 10 mois

Clearance problems with the rob rings hitting the outer casing

Marten de Groot replied il y a 8 ans et 10 mois

Hi Steve,
You need to mound the Rob Rings under the servo-pulley !
So it looks like this:
http://www.inmoov.fr/wp-content/uploads/2013/09/DSC06441.jpg

Regards,
Marten
- Steve Cole replied il y a 8 ans et 10 mois
  
  Thanks Martin, I seem to have missed the obvious .

Steve Cole a publié une note il y a 8 ans et 11 mois

Painted most parts of the arm and fingers so I’ve started assembly. Watched over by my R2 D2 I built a few years ago

Steve Cole a publié une note il y a 8 ans et 11 mois

Hi folks, I printed all parts for my left arm in grey now regret not printing them in white. We use grey mostly in our studio as for some reason it seems to print better. We are printing in pla. So I’ve bonded parts together and am sanding a filling prior to etch prime and paint them shiny white. I have all my servos and a roll of that special…En afficher davantage

Steve Rayner replied il y a 8 ans et 11 mois

I’m in Norfolk, UK. I started my InMoov at the beginning of the year. I have complete the eyes/face and am now working on the rest of the head. I’m hoping to complete the head by the end of March, but it’s taking me longer than expected.
- Steve Cole replied il y a 8 ans et 11 mois
  
  It might be good to get a group of us together in the uk to meet up and discuss progress and show off what we all have achieved
  - Steve Rayner replied il y a 8 ans et 9 mois
    
    Yes I’m up for that. I’d like to get a little bit further first, but it would probably drive me to make more progress. How can we contact other builders?
    - Steve Cole replied il y a 8 ans et 9 mois
      
      Hi Steve, I posted up on the google forum about this early this week. There are loads of Inmoov builders across the world but we don’t know each other. The original Inmoov map now does not work and I digested we have a page that we all put our location on with perhaps an email address. With that we could make contact with each other and get a…En afficher davantage

Gael Langevin a publié une note il y a 8 ans et 11 mois

Hello everyone!
Lately I haven\’t been communicating a lot on our community page…
The reason is my free time is just becoming SOOOO little that I try to keep up with the necessary.
So please keep communicating, and if ever I can, I will try to catch up with all your great posts!!

Best regards to all the InMoov Builders!

Jack_Zhao replied il y a 8 ans et 10 mois

Hello Geal:
I’m a college student from China –Shanghai Jiaotong University(SJTU), perhaps you are not familiar with it ,but it is one of the most famous university in China. And at present, we have a team working on the InMoov project .
Firstly I want to express my gratitude for your generosity about the design, and to be honest, each of the…En afficher davantage

Perry a publié une note il y a 8 ans et 11 mois

Made some new arm back covers based on Juerg’s design. Modified them so you can use the Neurvo boards.

http://www.thingiverse.com/thing:2141535

Gael Langevin replied il y a 8 ans et 11 mois

Nice, i needed that!
- juerg replied il y a 8 ans et 11 mois
  
  thanks for your upgrade of the part, good to see it used!

Mindless a publié une note il y a 8 ans et 12 mois

Hi Guys/Girls,,,Mr Gael

http://www.thingiverse.com/thing:2081052

Sketch-Up file is Included so you can do your own Mod work too,,,,,

Mindless a publié une note il y a 9 ans

Bob Houston replied il y a 9 ans

OK, I’ll bite. What is it?
- juerg replied il y a 9 ans
  
  ? a brand new dual extrusion head with coolers for the object and the extruders? Cooling the upper part of the extruder can prevent clogging – good. Enjoy the pic – once you start printing it won’t look as good as now!
  for ooze free multiple extrusion in a single object have a look at this
  https://www.multec.de/Extruder_1
  - Mats Önnerby replied il y a 9 ans
    
    It’s a dual extruder upgrade for the Vertex K8400 3D printer from Velleman. I can easily identify it, since I have the same printer for almost 2 years now. It works very well for PLA printing. It makes it possible to print different colors, but more importand, different materials. I tried it about a year ago, but at that time I have print quality…En afficher davantage

Mindless a publié une note il y a 9 ans et 1 mois

Inmoov Original version V1- for SketchUp has just been uploaded- I added the all Potentoimeter (see pic) Not the best looking Potentoimeter but clearly shows where they all go,,,and I added few of the main bolts Which are just Shaft with hex/Socket Heads- so I’ve managed to keep him Low-Res as possible- ,,this will be last update on Inmoov u…En afficher davantage

Bob Houston replied il y a 9 ans et 1 mois

Mindless, I have downloaded your 3D InMoov Man – nice work. Should I be able to move parts around so I can see the internal parts? The drawing loads as a « Read only » file in SketchUp. Or is the drawing just that, a drawing of the assembled parts?
- buildstoys replied il y a 9 ans et 1 mois
  
  Left-click a part (to highlight it in blue), then right-click and choose Hide.
- Mindless replied il y a 9 ans et 1 mois
  
  It a complete 3d model,,, so you hide parts to see inside him- or you make changes to parts then export that part as STL (Need Plugin) and print them out-,,, if your new to 3d modelling it will take a bit of time how to work stuff out,,,- but SketchUp is one of the easiest of the 3d modelling platform-
  The “load as read only” message means its dou…En afficher davantage
  - Mindless replied il y a 9 ans et 1 mois
    
    Sorry about that,,,,,now where was I,,,
    But you cannot work on the same file in two different widows —,, think of it as a “Master and Slave” set up,, the first time you open Inmoov man is the Master and if you open it again without closing that Inmoov the others will be loaded as slaves (read only),,,, and you cannot modify the slave ver…En afficher davantage
    - Bruno.Ash replied il y a 9 ans
      
      I’ve just downloaded your 3D model… WAHOU !!!
      Excellent job, it’s very fun to see the bot in 3D.
      Very convenient for mounting and color test.
      Thanks a lot for sharing

Mindless a publié une note il y a 9 ans et 1 mois

3d Inmoov Man in SketchUp all orignal STL Files,,,
http://www.thingiverse.com/thing:1995318

William hall replied il y a 9 ans et 1 mois

Downloaded these this morning. Very nice.
- Mindless replied il y a 9 ans et 1 mois
  
  Glad you like him,, had to rush the skull pieces cos I lost the original version , The next version I will release has had hundreds of hours put into him- he might look the same but he’s not,,, all the interior parts and Gearbox’s have had complete re-builds,,,plus some of the exterior parts have joined together for larger prints but not mod…En afficher davantage

Mindless a publié une note il y a 9 ans et 1 mois

Here is my 5pc Chest,,

Hutch replied il y a 8 ans et 11 mois

Looks nice! Have you posted the .stl files someplace?

Mindless a publié une note il y a 9 ans et 1 mois

Good question Perry- This is one use of a hundred mods/uses you can do with -3d Inmoov-
This mod allows the servo and gear to be positioned by just loosening and tightening the grub screw- You send the command line to the servo to adjust its position,,—,,then adjust the gear to the position you want,,, and then tighten the screw ,, I wasn’t s…En afficher davantage

Mindless a publié une note il y a 9 ans et 1 mois

-=3D Inmoov in SketchUp is Finished=-
“All Original STL Parts are Used,”- Except for the Fingers and Servo Tray,,,-I will post the file as a single download on Thingiverse tonight sometime-,,,Hope you enjoy

Perry replied il y a 9 ans et 1 mois

I am not sure of the purpose of this but I get the feeling it will be of great use to a lot of people. What should I use this for?
William hall replied il y a 9 ans et 1 mois

That is very cool. Thanks for sharing it!
Wei Xingfeng replied il y a 8 ans et 12 mois

Cool ! SketchUP is very popular and easy to use. By the way, where’s the link to the Sketchup-InMoov?

Mindless a publié une note il y a 9 ans et 1 mois

About a week to go and i should have this version finished off,,, This version is for the building process,,, so i have put him together using a lot of Mr Gael original parts,, using SketchUp as the 3d software so anyone should be able to pull him apart and see how he works and it will help with the building process a lot,,, this was a way…En afficher davantage

Mindless a publié une note il y a 9 ans et 1 mois

juerg replied il y a 9 ans et 1 mois

ehhh, nice perspective. looks like a lot of work to position the many parts at the right location and orientation

Mindless a publié une note il y a 9 ans et 1 mois

Back Covers are Done,,,

Mindless a publié une note il y a 9 ans et 1 mois

Hi Guy&Girls- Mr Gael
Yep,,, Done in SketchUp-, Should have the original version of him finished in a few of days-, There will be a couple of versions of him,,, the first version will be the one using 90% Mr Gael original parts so this will be very useful for the building process,,,,,, you learn a lot more about Inmoov having a 3d model of him to…En afficher davantage

Marten de Groot replied il y a 9 ans et 1 mois

Great and Nice work MindLess.
Thanks for sharing your experience with all InMoovers 🙂

Regards,
Marten

Mindless a publié une note il y a 9 ans et 1 mois

amby replied il y a 9 ans et 1 mois

very nice
Michael Hayward replied il y a 9 ans et 1 mois

WOW this and the previous post are GREAT, what software are you using?
- Jeremy replied il y a 9 ans et 1 mois
  
  i think its in sketchup

Mindless a publié une note il y a 9 ans et 1 mois

amby replied il y a 9 ans et 1 mois

very nice