Sign in to our website and become an InMoov member. It will allow you to post message, pictures, and share with others InMoov builders. It's just one click away!
Identifiant ou adresse e-mail
Mot de passe
Se souvenir de moi
juerg a publié une note il y a 7 ans et 1 mois
Check out my new InMoov video on starting to add autonomy to my robot
Hello Juerg, Super it will great to follow your progress!! Nice video by the way. 🙂
Marcos Barraza a publié une note il y a 7 ans et 1 mois
Hello, Very nice demo. 🙂
Le profil de Ahmet a été mis à jour il y a 7 ans et 1 mois
Jérome a publié une note il y a 7 ans et 1 mois
Cool, thanks for posting.
Le profil de JThom a été mis à jour il y a 7 ans et 1 mois
Hi, I am Marcos Barraza from México, i finish print my inmoov
Nice progress and pose for your robot. http://groups.google.com/forum/#!topic/inmoov/Hmg10sVv2l4
Thank you very much for your words, every day we remember you when we build the robot, you are a genius of design, the robot is called Aristoteles and we will install Artificial Intelligence to act as a philosopher, greetings from Mexico
testing voices https://www.youtube.com/watch?v=CjvVi1O1ZXc
joseph peterson a publié une note il y a 7 ans et 1 mois
might anyone have a list of the servos needed to conpleat this. ?
Hello, Have a look in the Hardware and BOM page
Le profil de Benjamin B. a été mis à jour il y a 7 ans et 1 mois
Jijo Kuriyan a publié une note il y a 7 ans et 1 mois
hello everyone am looking for the inmoov fixing stand in india please help !
Hello, I use a trolley and attached InMoov on it. https://s2.lmcdn.fr/multimedia/521401705022/1d14656c352d6/produits/diable-pliable-standers-charge-garantie-100-kg.jpg?$p=hi-w358
Thank you. from where we can buy this ?
Try to see if you can find something similar where you are. Or order from anywhere on Internet.
Hello Gael,
please let us know the original Hardware (Screws/nuts/bolts)which used to build Inmoov .am unable to find
Hello, You can find some information in the « Hardware and BOM » page.
“Inmoov completion”
“Coming together is a beginning, staying together is progress, and working together is success.”
Thanks for posting your picture! Nice workspace also.
Thank you so much
mario a publié une note il y a 7 ans et 1 mois
how to edit to activate the _InMoov.config ?
Hello, any text editor can do the job. I like to use SublimeText.
smattachai.p a publié une note il y a 7 ans et 1 mois
I tried to set servo motor for finger but it did not stay in the zero position.
I did easy command as follows. #include
Servo myservoindex; // set 0 position
void setup() { myservoindex.attach(3); }
void loop() { myservoindex.write(0); // set 0 postion }
Gael has a new video on the main page is a link or his youtube channel. it is about the elbow, but has info on exactly how to set the servo’s
Thanks
michaelbs007 a publié une note il y a 7 ans et 1 mois
I try to connect a servo engine to a erduino mega and run a sketch that in the samples, but nothing happens, ez controller is working what i do rong on arduino
Luke Sky a publié une note il y a 7 ans et 1 mois
😊
Cool gesture!
Thanks.
jean christian PON a publié une note il y a 7 ans et 1 mois
Bonjour à tous. Je travaille dans un centre de formation et souhaiterait utiliser le robot inmoov comme projet dans une formation destinée à des demandeurs d\’emploi, est ce que j\’ai le droit ? Merci d\’avance pour vos retours.
Le profil de Katnoria a été mis à jour il y a 7 ans et 1 mois
Le profil de S4 a été mis à jour il y a 7 ans et 1 mois
Le profil de Anil Jain a été mis à jour il y a 7 ans et 1 mois
Le profil de Luigi a été mis à jour il y a 7 ans et 2 mois
Chuah Wei Jie a publié une note il y a 7 ans et 2 mois
Finally a small step forward. Too bad it doesn’t fit together, guess I need to calibrate it again. Do I need to polish it using sand paper or anything after the printing?
For the rectangular hole I sanded a tiny bit on the bits that fit in. For the rest I only took off bits that should not be there, it was a (very) tight fit.
Still trying on different calibration, and it still doesn’t fit. I’m using PLA and the calibrator like always exceeding less than 1mm? Not really sure about that. Is the wall thickness that affect the printing exceeding the original scale?
Hi Chuah Wei Jie, I am only printing in ABS-X, sorry my 3D printing knowledge and experience is insufficient to be able to help. Maybe someone else with more experience can help.
My first parts were printed at .24 and didn’t fit so well. I then printed at .15 and they all fit together nicely. Also looked a lot better as finished product.
Mark is right, the lower the layer height the better. I was able to fit stuff together with .3 layers until I got to the worm gears and piston shafts. needed to go all the way to .12 to get those to operate smoothly. always had my infill on 15% for most parts, the « load bearing » parts or parts I thought would be stressed I went up to 30% infill.…En afficher davantage
Some things I found that help; as noted the higher quality layer height the better the fit, try your finest settings (say .1) and see where you are, then increase until they don’t fit. Use PLA+ if your going to use PLA. Amazons is cheap and works great. (Premium PLA) Print just the way the file is loaded, do not re-arrange the parts. Keep trying,…En afficher davantage
Jacques a publié une note il y a 7 ans et 2 mois
@admin Bonjour Gael Serait-il possible d\’avoir une photo du filage de l\’électro , le positionnement des cartes de face de coté et derriere Inmoov , cela aiderait beaucoup pour l\’aménagement des composantes. En passant j\’ai presque terminé de monter Inmoov , je passerai sous peut au fillage et branchement. Merci
Bravo Jacques, une photo bientôt?
Hello, Here are three pictures I did a bit in a hurry. If you need more info, let me know. http://inmoov.fr/wp-content/uploads/2019/04/IMG_3891.jpg http://inmoov.fr/wp-content/uploads/2019/04/IMG_3892.jpg http://inmoov.fr/wp-content/uploads/2019/04/IMG_3893.jpg
Le profil de hendrikjanv a été mis à jour il y a 7 ans et 2 mois
Le profil de Haefele Software a été mis à jour il y a 7 ans et 2 mois
Morning builders ! The printing process is finally get to start. I\’m using Anet A8 3D Printing. I wonder is there any suggested Start and End G-Code for such machine for a better result of printing? I\’m using Cura.
Great news! good luck Chuah Wei Jie! it is a great journey you are embarking upon. Unfortunately I do not know enough on Anet A8 to help you. But Cura works well for me.
Hi Michael ! I believe it will be. Actually I’m using Cura for the printing too. the thing that I wonder is that I’m not sure the setting of the Basic and Advanced column will provide a good printing result or not. I had uploaded my setting interface in my album. What do you think?
Hi Chuah Wei Jie, I have loaded the setting I am using in CURA for my ABS-X, different but they more or less work for me. With each printer and each print material they will be different. big difference I chose to print in 0.1 Have a good day
sorry Chuah Wei Jie, I meant to say in my album.
Thanks Michael ! I’ll try for both configuration during the printing process.
Coverks a publié une note il y a 7 ans et 2 mois
Wow, Covie is getting heavy! Our 15 year old students in my robot group now are ready for some real heavy lifting . Learning how to program and bring our creation to life….that is exciting!
En afficher davantage
Covie is brilliant! And you and your team has done brilliantly to build it so quickly. Good luck on the next stage, and as you say it will never be finished… as it is a journey of discovery and co-working and not a destination.
Thanks Michael! Wonderful hearing from fellow InMoov enthusiasts….our Makerbot replicator has been printing non stop about 15 hours a day six days a week for the past five months….InMoov is the gift that keeps on giving, to students and teachers alike.
Fantastic! First InMoov I see on a skateboard!
Thank you Gael. Boy, are we having fun …. Thank you again for your inspiring and innovative InMoov!
Michael Hayward a publié une note il y a 7 ans et 2 mois
Dear InMoov world,
A quick update from a chilly Jeeves InMoov, the last snows are melting at my workshop in France.
Like many, my InMoov journey has been a bit stop start, but now both printers are printing as fast as they can so that I can say “Hello world” as soon as possible.
Wherever you are in the world have a good day, a great weekend and…En afficher davantage
Wow Michael – I love your D6 setup! Looking forward to seeing what you create. Good luck with the build!
Beautiful workshop, by the way! 😀
Many thanks Richard, much appreciated, much printing to go.
Richard a publié une note il y a 7 ans et 2 mois
Hi Richard, I like your InMoov sticker/card with logo + did you print all your InMoov on your Wanhao D3?
Hi Michael, yep, I have a couple of Wanhao D3’s and it’s all printed by them. They’re different generations (I forget which version numbers they are, one is an early variant, before they introduced the power supply with the angled screen), They have all the usual community modifications, like the AZZA braces etc. The printer on the right of the…En afficher davantage
Morning builders ! If I just build for the upper part (Head + Neck), I wonder how many Arduino Mega does it required?
Hello, yes one mega with one NervoBoard will do the job. It will be called LeftSide Arduino. You will need to trick the pins for the RollNeck though, because normally it is attached to the right side Arduino. You can select a different pin in the config files of head. And also select the left board to be the master for…En afficher davantage
WOW, I just saw that we are 6,001 Members worldwide, another level has been reached. what great news that the community keeps on growing!
agreed, can’t wait to see some inmoov meetups, chatting to each other
🙂 Well, there was a long list of members waiting for approval. Checking them all today made the number of members increase in a short delay. New members to be approved must have a InMoov picture for their profile picture. (can be anything as long as it’s an InMoov part). It will save me time when approving members. Thanks and welcome to all new members!!
jason fetterman a publié une note il y a 7 ans et 2 mois
have alot of parts printed…thought id get the head going..so excited to be a part of this im burnin through the filament
good choice! there are some nice head mounts floating around too
appreciate it..i will be looking for 1…kind of got side tracked with settings i am printing a darth vader right now that is printing a real nice finish
ive been printing in grey and burnt it up have 3 more rolls suppose to arrive today then i can get back to inmoov
Peter a publié une note il y a 7 ans et 2 mois
I made some skin for my Inmoov
how did you do it? Is it silicone?
Yes, its silicone gel 00
Very interesting! You did a great job, it is so real! I was wondering if I’m able to do that! You must post the receipe! How did you do for the eye,S lids?
Well done, very impressive, which eyes and eye lids did you use? plus lots of other questions, such as do you notice any noise reduction from the servos?
I used basic silicone 00 and added some skin tone. The eyes are https://www.thingiverse.com/thing:2548952 but I modified a little bit. There is no reduction in sound and I added a spring at the back to counter the weight of the silicone
Thanks a lot! Sure I will try this one day! Congrats!
Hi Peter, Many thanks, very much appreciated.
That is brilliant. Creepy as hell, but brilliant!
It would be really interesting to know the process you used to create the mould for the silicone. Did you use a sculpt, or did you use a 3D file as the basis?
I simply made a plaster mould of the 3d printed face and copied it with about 5mm of silicone
Great idea, it’s turned out so well. Do you use a vac chamber?
Very good job! Could you post a picture or video of the face and eyes without the skin? And the interior of the skin for the attachments? It’s very interesting!
Very, very nice effect! The silicone seems extremely soft, did you add a lot of silicone oil? Is the skin mounted with magnets?
Has anyone integrated “Microsoft LifeCam Studio V2” web cam into the eyes?
Yes, it requires some mods, but it works well. Microphone is not very responsive inside the head, the the video is good.
Hi Doc Johnson, that is great news, many thanks. I have found a couple of sites where they show you how to strip down the camera to remove the case etc. do you have any guidance on the mods that would be required? or even (pushing my luck) some pictures?
You have great timing; I was just getting ready to install my EZB Camera in the other eye, so I had the assy apart. I took some photos; keep in mind, I just did this as a quick and easy setup; if you think about it, you can do a much cleaner job than I did. Photos are in my album area
Hi Doc Johnson, very much appreciated, I know what to do now. Many thanks
Always glad to assist. Have a great Day!
Jean-Marie a publié une note il y a 7 ans et 2 mois
Voilà pour le son avec HP intégré dans la bouche.
3D LAB TYUMEN a publié une note il y a 7 ans et 2 mois
Moving On 🙂 Is someone in my area wishing to partecipate?
Valentin a publié une note il y a 7 ans et 2 mois
New video with eyes
Well done looks great!
Expressions!
I wonder is this implementation suitable by using the Microsoft HD-3000 Live Cam?
you can open it and look at the board on which the camera is soldered. if HD-3000 Live Cam looks like VX 2000 web cam then the board is too big to enter into any eye.
Luke Sky a publié une note il y a 7 ans et 2 mois
Il piccolo cresce!!😊
Italian InMoov?
Yes i am italian😆 and my InMoov is 0.57% scale.
Cool, 0.57% ? What servo did you set instead? Do you use the Italian configuration for your InMoov in MyRobotLab?
Morning builders ! I wonder how many camera/s needed for the eye mechanism ? Is 1 more than enough?
Hello, Yes one is enough.
Rich FD a publié une note il y a 7 ans et 2 mois
Have had a couple of printer issues, a stepper motor died on the extruder. All back up and running now. I have decided to re do some of my early prints now the printer is calibrated and turning out better prints.
Very nice!
Le profil de Garry Valintine a été mis à jour il y a 7 ans et 2 mois
Netcab a publié une note il y a 7 ans et 2 mois
Hi Gael. Your project is incredible. I started by the software. Install and run the program and works very well the answers and deep learning of the program AB. The problem is when you step into Spanish. There is no longer works well. Forget your name and my name. Gives you bad time and is not going to sleep. Nor searching the internet. What can i do?
Hello, The Spanish version is not very developed because there isn’t much help from the community. We would need to get help to improve the AIML files.
Hello Gael, Thank you for your prompt response. I would love to participate and improve the code. I have no experience in programming of AIML but i have some expirience in Python and Java. I would be grateful for any guide that I can you give to collaborate in the improvement of the version of the bot in Spanish. I’ll be bothering you when I…En afficher davantage
Hello, The AIML programming is not so complicated to learn but it can be tricky because it communicates between files. Sometimes it takes time to find to which file some code refers to. Basic of AIML is on internet with this for exemple: https://www.tutorialspoint.com/aiml/ There is a small free software which can help you build your AIML (I don’t…En afficher davantage
Hello World! My first day
Le profil de Netcab a été mis à jour il y a 7 ans et 2 mois
Egy-Inventors a publié une note il y a 7 ans et 2 mois
Hand Control
smattachai.p a publié une note il y a 7 ans et 2 mois
Hi Gael Langevin,
I am building InMoov for 4 months with complete hardware and now working on software. I try many many time to locate my InMoov Project (Thailand) in your Google Location Map but no successfully yet. Could you help me how to do? Thanks.
Som 🙂
Hello, The map was setup a while back and the person that set it up needs to go in and make it more public again so that people that add their locations. I wasn’t able to add mine either.
Thank you for your comment. How can we let him know?
Gael is aware of the situation, not sure what his plans are with it though.
Jérome a publié une note il y a 7 ans et 2 mois
Nice
InMoov says: Where are my legs? Cool progress!
little by little hahaha.
Markus a publié une note il y a 7 ans et 2 mois
I\’m in Windows mixed reality!
Gee Markus, we are going to lose you in virtuality.
getting things ready to start the Inmoov project
Le profil de johnn a été mis à jour il y a 7 ans et 2 mois
Karthos a publié une note il y a 7 ans et 2 mois
So is there any estimate on how many complete/incomplete inmoovs there are in the world? seems like there are about 20 or so completed with videos on them and at least a few hundred being worked on that I can find documentation on so there are probably about 3-5K worldwide I am estimating? I am wondering how many nervos have been purchased.
Hello, Way, WAY above those numbers! The current estimation 16/03/19 is above a thousand built partly complete. We have no idea how many complete robot there is. To give you an exemple, I was recently visiting a school, where they have 3 complete (with legs) InMoov. They never posted pictures or videos of their robots… The 1000 clones is based…En afficher davantage
Well I’d say your number is likely higher.. due to the fact that the InMoov community has over 6,000 users now. IF you figure only HALF of those people built there InMoovs in one form or another.. and than add the fact as you said a school had 3 of them.. and I’m going to be building 2 of them .. one male one female. So he’ll have a companion LOL…En afficher davantage