Site-Wide Activity

Aaron Svicek a publié une note il y a 7 ans et 5 mois

In the coming weeks my students and I will embark on this most amazing journey to develop InMoov. I look forward to sharing the progress of my students. Warmest regards, Aaron Sv.

Gael Langevin replied il y a 7 ans et 4 mois

Welcome!

PAWAN a publié une note il y a 7 ans et 5 mois

Started printing.

Gael Langevin replied il y a 7 ans et 4 mois

Welcome!

T800 a publié une note il y a 7 ans et 5 mois

Best wishes to you all inmoov builders out there!
Just started today with my inmoov project, printing the right hand thumv, using an oldskool Ultimaker original plus printer, feeded with Form futura Premium PLA, color Robotic grey:).
Will keep you informed with the progress…

Gael Langevin replied il y a 7 ans et 4 mois

Welcome!

Laurie Mattila a publié une note il y a 7 ans et 5 mois

Is InMoov close to walking .? If so is there a link to updated page

prasket replied il y a 7 ans et 5 mois

Unfortunately I have not seen any indication that this is the case.
- Gael Langevin replied il y a 7 ans et 4 mois
  
  Some models are trying to walk…
  But it’s a matter of time.
  http://myrobotlab.org/content/version-2-legs

prasket a publié une note il y a 7 ans et 5 mois

Hello All! What is everyone (especially in US) using for power supply’s for their inMoov? All the info I can find so far is outdated links mostly from 2016.

I have my finger kit going but not enough juice for the HK15298’s I picked up. Figured I might as well figure out my power needs now. Especially since I just finished printing the…En afficher davantage

xecaz a publié une note il y a 7 ans et 5 mois

Good work on the website Gael, may better menu system!

Gael Langevin replied il y a 7 ans et 4 mois

Thanks!

Coverks a publié une note il y a 7 ans et 5 mois

We have had very good publicity lately with our student built InMoov whom we call Covie, named after our coworking group Coverks in Southern Norway, in a liitle town I call home. What is peculiar and very rewarding is the fact that I feel connected to other hobbyists and teachers and innovators, though being from a small town where collaboration…En afficher davantage

Gael Langevin replied il y a 7 ans et 4 mois

Very nice to hear that!
- Coverks replied il y a 7 ans et 4 mois
  
  Thank you Gael.

xecaz a publié une note il y a 7 ans et 5 mois

Volker replied il y a 7 ans et 5 mois

Ah, true love 😉
- xecaz replied il y a 7 ans et 5 mois
  
  We were both a bit drunk and shit happened.. 😉
  - Gael Langevin replied il y a 7 ans et 4 mois
    
    The wig makes the difference!
    But maybe it’s you that needs hair.
    🙂

xecaz a publié une note il y a 7 ans et 5 mois

Spending Xmas with family (and benefits)

xecaz a publié une note il y a 7 ans et 5 mois

High and mid stomach

Volker a publié une note il y a 7 ans et 5 mois

Hi all,
I’ve just started the Project few days ago and I’m currently printing like I want to win a championship.
In parallel I’m also studying the updates and I have 2 Questions:
1.) I like to use 2 Arduino mega 2560 as the « brain » of the system. Is there place enough on the backside of the Torso and are there .stl-files available for the…En afficher davantage

Brat Wade replied il y a 7 ans et 5 mois

There is a different way where it will be going to get the part for the projects where it needs the latest aspects which can manage the part through https://epsonsupports.net/blog/epson-printer-not-printing/ which will help a lot.

prasket a publié une note il y a 7 ans et 5 mois

Hello All! Justin getting started on InMoov project!

Already ran into power issue though with the finger-starter kit. I even tried to power with the power adapter that came with my Arduino Uno kit. I might just go ahead and look into getting the 6V 60Amps Switching Power Supply mentioned by Gael in the latest BOM update.

While I work on…En afficher davantage

Mark Seaton replied il y a 7 ans et 5 mois

Isn’t the Prusa 250mm bed?
The only parts that need a 250mm bed so far anyway are the legs. So you have a while to go.
And I have printed in PLA all the way, as long as you have your settings right that should be strong enough anyway.
- prasket replied il y a 7 ans et 5 mois
  
  Hi Mark – The prusa bed is 250x210x210 but that might be large enough. I thought some of the chest pieces might have needed a larger bed.
  - Mark Seaton replied il y a 7 ans et 5 mois
    
    The original design was for everything to be able to be printed on a 120mm x 120mm bed. so you will be fine. Like I said, the legs are the biggest and I still had a little room on my 250mm bed when I did the thighs.

Igor Sánchez a publié une note il y a 7 ans et 5 mois

Hi , what type of material I have to use?? PLA or ABS

prasket replied il y a 7 ans et 5 mois

Gael uses ABS but states PLA is OK. I personally started with ABS but moved over to PLA as I could not keep the temps steady without an enclosure for ABS. I have seen lots of others with PLA as well.

marco a publié une note il y a 7 ans et 5 mois

Gael Langevin replied il y a 7 ans et 4 mois

Superbe!

Facchini Gabriele a publié une note il y a 7 ans et 5 mois

Merry Christmas

Gael Langevin replied il y a 7 ans et 4 mois

Nice color matching!
Facchini Gabriele replied il y a 7 ans et 4 mois

Thank you

Facchini Gabriele a publié une note il y a 7 ans et 5 mois

An operating video in Italian

Gael Langevin replied il y a 7 ans et 4 mois

I am glad the Italian version is finally getting used!
I am currently working on the Portuguese version if anyone is interested.
It will be released with Nixie MyRobotLab.
- Facchini Gabriele replied il y a 7 ans et 4 mois
  
  My next step is to put ball bearings in the neck for a smoother movement. Replacing the battery to the pb with a more powerful 14/15 volt lipo with use of switching inverter for 6 volts for servos and 12 volts for other uses.
  - Facchini Gabriele replied il y a 7 ans et 4 mois
    
    Study hypothesis for the use of Inmoov movements of a hoverboard with self balance
- António Silva replied il y a 6 ans et 10 mois
  
  Hi fellows, Gael how can i acess the portuguese bots that you are developing?
  - Gael Langevin replied il y a 6 ans et 10 mois
    
    Hello, Here is the Github link for the Potuguese bot files.
    Note that it is at a very basic level.
    https://github.com/MyRobotLab/inmoov/tree/develop/InMoov/chatbot/bots/pt-PT
    - António Silva replied il y a 6 ans et 10 mois
      
      Thank you very much … Greetings «
Edson Pires da Silva replied il y a 7 ans et 3 mois

Hi Gael. I am brasilian. I work in a technical school, and we are construct one Imoov.
I hope you translate to portuguese, because will be easy for brasilian students

Facchini Gabriele a publié une note il y a 7 ans et 5 mois

other photos

Facchini Gabriele a publié une note il y a 7 ans et 5 mois

Hello everyone, a couple of months i’m dedicating to is fantastic project (thank Gael) and that is final result.

Andrew a publié une note il y a 7 ans et 5 mois

Wow, ordered the nervo boards from the inMoov web site last week and they arrived today. This is getting funny everything is arriving, but the 3D printer. Lets see, servos, adrinos, filament FreeCad just missing one thing.

Still haven\’t come up with a name yet, Hum 🙂

Marcus a publié une note il y a 7 ans et 5 mois

Hello! This is my variation about Inmoov 🙂 What do you think?

Gael Langevin replied il y a 7 ans et 4 mois

Oh hey you could meet these guys:
https://i.avoz.es/sc/rtP8kAs8beZ6sTjcNFLC4j2eRqo=/x/2017/04/10/0012_201704VA10C3F1jpg/Foto/VA10C3F1.jpg

Kenneth Troke a publié une note il y a 7 ans et 5 mois

Starting the Inmoov build…have torso, left shoulder and head printed on cr-10s…just received a lot of servos….enjoying these challenges in my retirement….skull needs redone as it seems awkward….thank you Gael for this project…..

EMILIO G a publié une note il y a 7 ans et 5 mois

Hola os quiero presentar a Cesar.

Jose replied il y a 7 ans et 4 mois

Hola Emilio,
Gran trabajo!!!!

Angus YOUNG a publié une note il y a 7 ans et 5 mois

Well, for the past 7 days, the little old Anet A8 printer has had a lot of filament thrown at it, and so far I have a head (no electronics as yet, the electronics are taking longer to arrive than to print the parts for lol) I have just printed off the top front and most of the top back parts for torso’s, just the centre connector section to do. I…En afficher davantage

Andrew a publié une note il y a 7 ans et 5 mois

InMoov here I come. I ordered a creality 10S5, and it is somewhere in transit. Though while I was waiting I ordered some filament that arrive the next day. I also ordered a bunch of parts with Hobby King telling me a few where out of stock.

Now I have to make a critical decision, what will I name you?

xecaz a publié une note il y a 7 ans et 5 mois

This is taking ages on a single printer so I dusted of the Kossel mini delta printer too. Electronics so far seems pretty easy, so might build a cable loom instead of the nervo board setup.

Richard Cleveland a publié une note il y a 7 ans et 5 mois

Beta my InMoov is now under construction.

Kenneth Troke replied il y a 7 ans et 5 mois

wow nice job!!
i just started the head too but not getting the smoothness of the parts like you are….what printer are you using and what temperatures if you dont mind…kenz

Nabeel Ahmad Khan a publié une note il y a 7 ans et 6 mois

Hey members, I have seen here are only STLs files available, could you please tell me about CAD files I want customization.

Reece replied il y a 7 ans et 5 mois

Hi Nabeel, To get CAD files you pretty much have to reverse engineer them for your self. I’ve been working on mine (on and off) over the last three years (using Onshape).