Site-Wide Activity

Le profil de Hammertime- TH a été mis à jour il y a 8 ans et 3 mois
Rune Thagaard a publié une note il y a 8 ans et 3 mois

The big day finally arrived, where i had my first pleasant conversations with Robert!
What a joy to finally see him come alive after spending so many hours on printing and build his head and right arm!
Now i’m even more determined to get the rest done 😀
- dan replied il y a 8 ans et 3 mois
  
  Congratulations! That’s gotta feel great. Hope to be at that stage soon.
  - Rune Thagaard replied il y a 8 ans et 3 mois
    
    It sure does 🙂
    - Wilco Van Toorn replied il y a 8 ans et 3 mois
      
      Congratulations, and be carefull, once hooked it will change your life. Inmoov isnt a hobby its a way of life. Keep up the good work!
      
      Rune Thagaard replied il y a 8 ans et 3 mois
      
      Hehe, yea. It’s gonna be awesome 🙂
- Gael Langevin replied il y a 8 ans et 3 mois
  
  Very good!
  Did you see you can select various type of voices in the InMoov config of MyRobotLab.
  - Rune Thagaard replied il y a 8 ans et 3 mois
    
    Yea, I would have loved to give him a scottish accent, sadly they only got a womans voice for English scottish at acapela-group.com.
    My biggest struggle at the moment though is to get the face recognition to work.
    I need to have another look at that this weekend.
Mike Lab a publié une note il y a 8 ans et 3 mois

looks like fun:)
- Rune Thagaard replied il y a 8 ans et 3 mois
  
  Indeed.
  But it certainly satisfy your desire to solder for a while, once your done with that set 😀
  - lecagnois replied il y a 8 ans et 3 mois
    
    yes good kit of gael .presse a very fine iron failure
    - Mike Lab replied il y a 8 ans et 3 mois
      
      not sure about the best solder for those boards?
  - Mike Lab replied il y a 8 ans et 3 mois
    
    excited to warm this unit up:) https://www.amazon.com/gp/product/B000ARU9PO/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
    - Gael Langevin replied il y a 8 ans et 3 mois
      
      I’m using standard electronic solder 1.0mm diameter. I recommend thinner diameter if you are not used to soldering.
      The XT60 headers need a good amount of heat to be correctly soldered.
Le profil de Bora TR a été mis à jour il y a 8 ans et 3 mois
Steve Rayner a publié une note il y a 8 ans et 3 mois

Working on the left forearm.
- Gael Langevin replied il y a 8 ans et 3 mois
  
  Congratulations, Civrays InMoov is progressing nicely!
Le profil de rjkthierry a été mis à jour il y a 8 ans et 3 mois
Mike Lab a publié une note il y a 8 ans et 3 mois

Slowly making progress…
- amby replied il y a 8 ans et 1 mois
  
  nice work i do the same neck which servo did you use? i use mr996 is not enought strong
  - Mike Lab replied il y a 7 ans et 9 mois
    
    My neck moves fine with the three servos working together.
Le profil de Thomas Iw3D a été mis à jour il y a 8 ans et 3 mois
David Allan a publié une note il y a 8 ans et 3 mois

Hi Gael, I am hoping to display my InMoov at a Makerfaire next year and would like to know if I can use some of your copyrighted photos in the gallery.
Thanks,
Dave
- Gael Langevin replied il y a 8 ans et 3 mois
  
  Let me know which one you want to use. Some are under Right reserved terms.
  For the other one, as long as the credits are correctly displayed, it will be good to have InMoov displayed in another Makerfaire. Which Makerfaire by the way?
  You can add your event in the calendar event…En afficher davantage
  - David Allan replied il y a 8 ans et 3 mois
    
    I would like to use two photos from the Gallery/photos section. They are labelled InMoovSkullSmall.jpg and DSC_0036bis2.jpg, or if you think you have more appropriate photos I would be happy to use them. The Makerfaire is located in the North East of England in the city of Newcastle Upon Tyne in the Life Science Centre on the 28/28th of April…En afficher davantage
justo a publié une note il y a 8 ans et 3 mois

Yep it is a long way but is coming along.
- Robbert Loos replied il y a 8 ans et 3 mois
  
  did the bottom thigh part fit on the top knee part ?
  yesterday i printed the left leg. i noticed when i line up the parts on the outside the holes dont match, they are off by 4mm
- Gael Langevin replied il y a 8 ans et 3 mois
  
  Hello Robert,
  My mistake, it’s fixed now. But you do not need to re-print, just extend the holes with a drill and it will do the trick.
Keukpa a publié une note il y a 8 ans et 3 mois

Legs are coming together….
- Gael Langevin replied il y a 8 ans et 3 mois
  
  Woouiii, I can see that your printer is kept busy!
  - Keukpa replied il y a 8 ans et 3 mois
    
    It is indeed! 🙂 It’s soooo cool to see these come together. Exciting times indeed! Thanks for the great work! 😀
Adithya NS a publié une note il y a 8 ans et 3 mois

Hello Sir, Thank you very much for Sharing your project so that students like me can learn Robotics. I have printed some parts already. Sir can you share printing guide for all the parts. I would be of great help if you could do it. I’m using ABS. Thank you very much Sir.
- Mindless replied il y a 8 ans et 3 mois
  
  Printer setting for Basic Parts (ED3v6 with 0.4mm Nozzle)
  ———————————–
  3 perimeters
  3 solid layers
  30% infill
  30mm/sec perimeters speed
  30mm/sec Solid Layer speed
  80mm/sec Infill speed
  0.3mm layer height
  0.3mm Z -Hop -Lift the nozzle between moves to prevent scarring on surface finish
  Top/ Finish Layers =…En afficher davantage
  - Wilco Van Toorn replied il y a 8 ans et 3 mois
    
    Watch your acceleration speeds, looks like they are too fast. If in doubt, slow down on speeds. And if your printer isnt properly calibrated the corners will be not sharp as yours arent. That can be tweaked with accel speeds and jerk in the eeprom settings. Also it depends onwhat printer you have. But 80mm/s infill is pretty fast. Start with slow…En afficher davantage
    - Adithya NS replied il y a 8 ans et 3 mois
      
      Sir I’m using Anet A8 printer with Cura software. As you told Sir, the corners are not sharp and nozzle temperature was bit high. Sir which slicing software you recommend me to use and also can you give me your slicer settings so that I will try them to get better understanding of 3d printer.
      
      Regards,
      Adithya
  - Adithya NS replied il y a 8 ans et 3 mois
    
    Thank you very much for the settings Sir. I will try them today and will get back to you if I run into some problem.
    
    Regards,
    Adithya
lorn campbell a publié une note il y a 8 ans et 3 mois

My new Headbot stand perhaps? Great for the table top.
- Gael Langevin replied il y a 8 ans et 3 mois
  
  Handy! Not sure if the term is appropriate though…
Rune Thagaard a publié une note il y a 8 ans et 3 mois

Slowly moving forward with the robot.
Remade the forearm in white and build the bicep and most of the torso.
Hopefully i will be done with the head done by the end of this week.
lorn campbell a publié une note il y a 8 ans et 3 mois

New right foot!! Brilliant Gael – also are you going to upload the servo linkages?
- Julian replied il y a 8 ans et 3 mois
  
  What type of material are you using for your prints?
  - lorn campbell replied il y a 8 ans et 3 mois
    
    All in PLA, I have never used ABS. Seems to work fine even with gears etc. I am going to try PETG for my InMoov neck parts that keeps breaking [BH mod that Gael has recently updated]
    - Julian replied il y a 8 ans et 3 mois
      
      That was my thought – It is too white for PLA… Could you say me from which company you bought your PLA? I am searching for the bright white you are having too!
      
      lorn campbell replied il y a 8 ans et 3 mois
      
      The PLA is from Technologyoutlet.co.uk but I buy it from Amazon as its cheaper there. Always used this brand and its been good. https://www.amazon.co.uk/Premium-quality-filament-suitable-printers/dp/B00I8MRPDM/ref=sr_1_4?ie=UTF8&qid=1509304225&sr=8-4&keywords=pla+filament+1.75mm
      
      The PETG I am going to try is from e3D-online EDGE range
Gael Langevin a publié une note il y a 8 ans et 3 mois

Hello everyone,
I started the tutorial for the legs assembly:

Legs Non Motorized

I still need to finish it but I already published it because I see some of you already have started to print them.
Have fun building!!
- lecagnois replied il y a 8 ans et 3 mois
  
  Thank you Gael for your work. I’m waiting for the end of your tutorial to start printing.
  our Inmoov are going to be beautiful.
cristian a publié une note il y a 8 ans et 3 mois

Hello, I want to print stomach en pla, how much infill do you recommend? 100%?

RollBackLeftV1.stl
RollBackRightV1.stl
RollFrontLeftV1.stl
RollFrontRightV1.stl
- Mindless replied il y a 8 ans et 3 mois
  
  100% is properly overkill ,,, 3mm to 5mm shell thickness and 30% to 50% infill is good allrounder for strong parts – ,, it’s really hard to give an exact printing method,,, everyone has their favourite methods/technics of printing and it depends on the slicer and extruder too ,,,
- Perry replied il y a 8 ans et 3 mois
  
  What mindless said is exactly right
loward a publié une note il y a 8 ans et 4 mois

Pourriez-vous me dire l préférence pour faire les pièces en plastic ou en a b s
merci à vous
Mindless a publié une note il y a 8 ans et 4 mois

This is about 20th rebuild of the Gearbox’s,, I’m pretty well Fished it ( i think),,, the Adjustable Pot holder System was gone through many changes and I think I’ve found I good medium between room for Wires and ease of use – I have taking it back to a Single Stage with -/+ 45Degs of Adjustment- the design can be easily Modded to suit Differe…En afficher davantage
Rohmer a publié une note il y a 8 ans et 4 mois

Bonjour, si quelqu’un peux me donner la solution concernant l’utilisation de Myrobotlab.1.0.2340 qui à chaque lancement, m’indique une erreur de Framework sous windows 10, photos ci-jointes, je n’arrive pas non plus à avoir un signal sur mes deux cartes arduino gauche et droite avec les commande vocal. Je me sens un peu perdu. Au passage je v…En afficher davantage
- Gael Langevin replied il y a 8 ans et 3 mois
  
  Bonjour,
  Comme vous aviez egalement pose cette question assez smilaire en message prive, je colle ici la reponse qui vous a permis de debloquer votre probleme. Cela peut servir pour d’autre personne.
  
  « Version officielle et fonctionnelle se trouve ici:
  
  Bonjour, si quelqu’un peux me donner la solution concernant l’utilisation de Myrobotlab.1.0.2340 qui à chaque lancement, m’indique une erreur de Framework sous windows 10, photos ci-jointes, je n’arrive pas non plus à avoir un signal sur mes deux cartes arduino gauche et droite avec les commande vocal. Je me sens un peu perdu. Au passage je v…[Read more]– Rohmer (@bruno-rohmer) October 24, 2017
  
  La liste des commandes en Français se trouve dans le…En afficher davantage
Le profil de GINGI a été mis à jour il y a 8 ans et 4 mois
justo a publié une note il y a 8 ans et 4 mois

Thanks Gael. I got it. Actually I\’m printing right now. Excellent job like all ways!
Perry a publié une note il y a 8 ans et 4 mois

Looks like the leg files are up. Probably took Gael quite a few hours to make the thumbnails.
Printing already.
Mindless a publié une note il y a 8 ans et 4 mois
- Perry replied il y a 8 ans et 4 mois
  
  What’s that?
  I like your style. Mostly CAD for now or are you printing parts?
  - Mindless replied il y a 8 ans et 4 mois
    
    Design,,, Print,,, Test,,,, then Repeat until it Works,,, lol
    I post Pics of the CAD files so its easier to understand what the parts are doing—
    This Adjustable Pot System is almost finished have done about 14 prints to get it correct,,, it has been very tricky to design,,,, has been implemented in the Elbow / Biceps / shoulder so far,,, the p…En afficher davantage
    - Mindless replied il y a 8 ans et 4 mois
      
      Actual the Elbow not the Bicep is the 1 Stage System ,,,,, on my first coffee for the day/night or whatever time/day it is,,,
Mindless a publié une note il y a 8 ans et 4 mois

Many Thanks Mr Gael for Releasing the Leg Files for all of us that like to Tinker and Tweak,,,
- Perry replied il y a 8 ans et 4 mois
  
  Agree. It is like an early Christmas
Le profil de Penyrheol Comprehensive School a été mis à jour il y a 8 ans et 4 mois
Load More activity