Site-Wide Activity

Rohmer a publié une note il y a 9 ans et 8 mois

Pour ceux qui veulent un oeil en verre, vous découper à la scie diamantée une lampe radio.
- amby replied il y a 9 ans et 7 mois
  
  tres bonne idee merci d avoir partagé
Markus a publié une note il y a 9 ans et 8 mois

Robyn Inmoov samsung gear 360 test
Le profil de Patrick (TonTonPat) – Near Brussels, Belgium a été mis à jour il y a 9 ans et 8 mois
juerg a publié une note il y a 9 ans et 8 mois

A moveable base and a planned escalator for Marvin. Don’t want to drive around with Marvin in scary heights.
andrew a publié une note il y a 9 ans et 8 mois

can fix chest and back files i need download. thank you
Jeff a publié une note il y a 9 ans et 8 mois

Received my Ultimaker 2 Extended and ABS. Finishing out my work space this weekend to begin printing.
- Jeff replied il y a 9 ans et 6 mois
  
  Had some trouble getting ABS to stick to the plate, so purchased Wolfbite glass bed adhesion solution, now even the larger prints are sticking with no issue. Also discovered room temperature makes a big difference. I prefer 16 degrees room temperature, but my ABS printing seems to work best above 20, so I have to sacrifice a bit.
Flavio Freitas a publié une note il y a 9 ans et 8 mois

Evento Olimpíada do Conhecimento 2016 no Brasil – Brasília
Flavio Freitas a publié une note il y a 9 ans et 8 mois

http://www.portaldaindustria.com.br/cni/imprensa/2016/11/1,102345/5-tecnologias-de-ponta-da-industria-para-voce-conhecer-na-olimpiada-do-conhecimento.html
The Mak3rs (Pvt.) Limited a publié une note il y a 9 ans et 8 mois

Our own project. Controlled by EMG sensors.
Contact us: 03224710671
info@themak3rs.com
- rodolfo rojas replied il y a 9 ans et 7 mois
  
  fantastic
The Mak3rs (Pvt.) Limited a publié une note il y a 9 ans et 8 mois
- Marten de Groot replied il y a 9 ans et 8 mois
  
  Hi Guy’s,
  
  I like to remind you, it’s not aloud to use the InMoov in a commercial way !
  InMoov Robot by Gaël Langevin is licensed under the:
  – Creative Commons
  – Attribution
  – Non-Commercial license.
  https://creativecommons.org/licenses/by-nc/3.0/
  
  Thank you for your understanding.
  
  Regards,
  Marten
  - The Mak3rs (Pvt.) Limited replied il y a 9 ans et 8 mois
    
    I apologize. How can i edit the post?
    Thanks
    - Sebastien replied il y a 9 ans et 8 mois
      
      You can’t, this is not an active functionnality.
      I remove for you the commercial link 😉
Ross McNeill a publié une note il y a 9 ans et 8 mois

Hello everbody,

Added photos to my gallery showing progess on my inmoov as of 14th Nov 2016.

Also shows replacement of HS-805BB on shoulder and stomach with 12vdc gear motors, H Bridge driver and pro mini for PID loop.

Now adding Nervo boards to move electronics off test bench into inmoov.

Ross
- Mindless replied il y a 9 ans et 8 mois
  
  Cool… nice to see someone experimenting with the drive system,,,
  You will have to keep us updated on the progress or even a quick tutorial once you’re finished,,,
- amby replied il y a 9 ans et 7 mois
  
  hello ross hey nice job you do my idea but me i use drill motor
  you cas see here my work
- amby replied il y a 9 ans et 7 mois
  
  https://www.facebook.com/photo.php?fbid=10205427365825354&set=a.2973743144393.2152594.1286230239&type=3&theater
lorn campbell a publié une note il y a 9 ans et 8 mois

Hi everybody, finally got around to uploading some pictures of my inmoov. My printerstopped working recently but all working again now and printing the left arm!!
Le profil de Nomadd_UK a été mis à jour il y a 9 ans et 8 mois
SensorsLab IUT St Nazaire a publié une note il y a 9 ans et 8 mois

We start robot building with students
Jan a publié une note il y a 9 ans et 8 mois

Thank you for your encouragement and a great project. Since childhood I’m interested in technology and science fiction (books, film) and this is a dream come true for its own robot 🙂 I can not wait a few years to retirement will have more time.
I have a friend who also likes it, but he says, « when I’m Pepa go to the fridge for a beer, » so he…En afficher davantage
Mindless a publié une note il y a 9 ans et 8 mois

2pc Forearm- 100% Infill- PLA
juerg a publié une note il y a 9 ans et 8 mois

Tried to win a bike in a foto competition but it looks like they had no robot in the jury 🙁
Perry a publié une note il y a 9 ans et 8 mois

There was a surprise party when I got home from work!
- Hans-Jörg replied il y a 9 ans et 8 mois
  
  Hi Perry,
  
  he looks sad, he needs a girlfriend. 🙂
Le profil de th a été mis à jour il y a 9 ans et 8 mois
Hans-Jörg a publié une note il y a 9 ans et 8 mois

Hi Gael,

the ball-bearing rotcenter is online, the pivcenter follows in a few days.
http://www.thingiverse.com/thing:1876443

regards Hansi
- Perry replied il y a 9 ans et 8 mois
  
  Where do you get the ball bearings? I like your work. For myself I like the idea of no ball bearings though. That is just my preference. I like that this can mostly be printed without a lot of extra parts to buy. Even if a ball bearing installation is much more efficient. You’ve done nice work though.
  - Hans-Jörg replied il y a 9 ans et 8 mois
    
    Hi Perry,
    
    I like the idea of no ball bearings too, but as I began with my InMoov there was one problem, the circle holes are not realy round and the move of my head not realy even. You need a big Servo with a lot Power to move it.
    With the Arms it is the same, a lot of Power from the Servo is used to move the wormgear. With the ball-bearing I…En afficher davantage
    - Richard R replied il y a 9 ans et 8 mois
      
      Brilliant… Love this setup. I am using much stronger servos than the 805bbs too so this is something I would like to use. I also have been experimenting with a new low temp Poly carbonate so now my PivCenter, worm and Piv Gears are incredibly strong as well… Nice… thanks
      
      Mindless replied il y a 9 ans et 8 mois
      
      Hi Hans
      So are these the correct sizes in mm-
      689 bearing is -9mm x 17mm x 5mm
      61709 bearing is-45mm x 55mm x 6mm
      
      I just done a quick search with the bearing Numbers you gave and this size keeps showing up -just like to double check before parting with any money- plus i might some in the bearing bin back on the farm-
      Nice work on the Mod,…En afficher davantage
      
      Hans-Jörg replied il y a 9 ans et 8 mois
      
      Hi Mindless,
      
      yes, that are the correct size of the ball-bearings.
- Hans-Jörg replied il y a 9 ans et 8 mois
  
  I found a reseller, where you can buy a Set of ball-bearings ( 2 x 61709-2RS and 1x 689-2RS ) for 10€ incl. shipping to Germany ask me for contact.
  - Mindless replied il y a 9 ans et 8 mois
    
    I already brought x4-61709- for $26au from china- about 15min after we last spoke,,,, i can get the 689 for $5each in australia,, but thats good to know that you found a seller, im sure there there will be plenty of people looking for them- printing out your mod right now- will post a pic on your Thingiveres account when finished–
- Hans-Jörg replied il y a 9 ans et 8 mois
  
  The Piv-center is ready for download.
Sergey Tvelnev a publié une note il y a 9 ans et 8 mois

InMoov & XPider
- Perry replied il y a 9 ans et 8 mois
  
  Really nice job
- Gael Langevin replied il y a 9 ans et 8 mois
  
  Great work and nice InMoov you’ve got there!!
- amby replied il y a 9 ans et 7 mois
  
  so nice your inmoov
Le profil de Mark Hesterman a été mis à jour il y a 9 ans et 8 mois
Le profil de Michel Desroches a été mis à jour il y a 9 ans et 8 mois
Load More activity