Community v2

Members Activity Stream

  • Illustration du profil de Santhosh Kumar

    Santhosh Kumar a publié une note il y a 7 ans et 8 mois

    Thank you Gael Langevin for your amazing design, they are so well thought off, it just makes me feel like a child again assembling the puzzles, all the printing and playing.. This has kept me entertained, excited and loads of learning and fun.

  • Illustration du profil de Santhosh Kumar

    Santhosh Kumar a publié une note il y a 7 ans et 8 mois

    Wonderful once they are assembled.
  • Illustration du profil de Santhosh Kumar

    Santhosh Kumar a publié une note il y a 7 ans et 8 mois

    I have been slowing accumulating printed parts. Its time to get assembling..















  • Illustration du profil de Grove Imagineers

    Le profil de Grove Imagineers a été mis à jour il y a 7 ans et 9 mois

  • Illustration du profil de Grove Imagineers

    Grove Imagineers a publié une note il y a 7 ans et 9 mois

    Hi Everyone, We’ve started with the Inmoov right hand as our very first project for our school STEMlab. We’ve been having a few issues with getting My Robot Lab running, it seems to refuse to open saying we’ve got inmoov.py not available. Does anyone have any advice? We’ve got to show it off to the school governors on Monday afternoon and to…En afficher davantage

    • Illustration du profil de Morten Enholm
      Morten Enholm replied il y a 7 ans et 9 mois

      You should probably paste the exact error, and also tell us if you run on a pc, mac or linux ?

      • Illustration du profil de Grove Imagineers
        Grove Imagineers replied il y a 7 ans et 9 mois

        Hi Morten,
        Sorry, I’m running on a Windows 7 pc, the error I’m getting is;
        —————————————————————————–
        START MRL AND INMOOV
        —————————————————————————–
        Error : C:\windows\system32\InMoov\InMoov.py is not available CHECK ABOUT SPACES INSIDE FOLDERS NAME or SPECIAL CHARACTERS
        “c:\mrl” is a great place to start

        • Illustration du profil de geoff jones
          geoff jones replied il y a 7 ans et 9 mois

          Did you follow the installations instructions for mrl properly, because the Start_Inmoov.bat would be in the c:mrl folder as would the mrl files and not where your fault message is pointing. I suggest you delete and start again following exactly the instructions on the mrl site like this

          Setup software

          Download JAVA 8 -…En afficher davantage

  • Illustration du profil de bastelgarage

    bastelgarage a publié une note il y a 7 ans et 9 mois

    Robina, A girl was born
  • Illustration du profil de Isabel

    Isabel a publié une note il y a 7 ans et 9 mois

    Making progress! Almost done with both arms as well and will attach once mid stomach is complete.

    I am having a problem with the two parts under the Kinect simply not fitting. Does anyone have any suggestions for making it fit or have an edited .stl that works better?
  • Illustration du profil de bastelgarage

    bastelgarage a publié une note il y a 7 ans et 9 mois

    Neopixel ring for Eyes
  • Illustration du profil de bastelgarage

    bastelgarage a publié une note il y a 7 ans et 9 mois

    Head is growing…
  • Illustration du profil de bastelgarage

    bastelgarage a publié une note il y a 7 ans et 9 mois

    First InMoov Lady in progress….
  • Illustration du profil de Tricia279

    Tricia279 a publié une note il y a 7 ans et 9 mois

    Before I start to build the head, I\’m looking for someone here in the community who gave the face a female emotion.
    I appreciate your answers 🙂

    • Illustration du profil de bastelgarage
      bastelgarage replied il y a 7 ans et 9 mois

      i believe since females then results from programming, female voice and breastplate changes

      • Illustration du profil de Tricia279
        Tricia279 replied il y a 7 ans et 9 mois

        Hi bastelgarage,
        can we talk in German ?
        Was hast du am Kopf verändert ? Nur etwas pink ist mir zu wenig weiblich. Ich denke da eher an eine bestimmte Augenbraunform und eine andere Lippenkontur.
        If you do not understand my German reply, please let me know.

        • Illustration du profil de bastelgarage
          bastelgarage replied il y a 7 ans et 9 mois

          Hallo Robbi
          Da ich auch noch neu hier bin, habe ich am Kopf noch keine änderungen gemacht. Ich werde den InMoov zuerst ganz normal zusammenbauen und mir dann wenn ich die einzelheiten kenne Spezialteile bauen. Ich kenne mich sonst komme ich nie an mein Ziel, wenn ich schon am Anfang zeit für Abänderungen investiere. Ich denke mal ich werde Br…En afficher davantage

          • Illustration du profil de bastelgarage
            bastelgarage replied il y a 7 ans et 9 mois

            English:
            Hi Robbi
            Since I’m new here, I haven’t made any changes to my head. I will assemble the InMoov first as usual and then when I know the details I will build special parts. Otherwise I never get to my destination if I invest time for changes right from the beginning. I think I’ll make breasts and a thong. (Then nobody looks at the eyes…En afficher davantage

    • Illustration du profil de bastelgarage
      bastelgarage replied il y a 7 ans et 9 mois

      Hab grad das noch gefunden:
      https://groups.google.com/forum/#!topic/inmoov/b82E1fd1gR8
      schau dir unten die Bilder an, ist was du suchst.
      mfg Alf

  • Illustration du profil de Vdg-7

    Le profil de Vdg-7 a été mis à jour il y a 7 ans et 9 mois

  • Illustration du profil de Cristian

    Le profil de Cristian a été mis à jour il y a 7 ans et 9 mois

  • Illustration du profil de Sam Gulve

    Sam Gulve a publié une note il y a 7 ans et 9 mois

    Hello all. I am Sam and I just joined. Very excited to be part of this group. I am looking to connect with others in Bangalore, India region who have worked with InMoov before or are working on it at present. Would love to understand from your experience. You can reach out to me at samgulve@gmail.com

  • Illustration du profil de jameller

    jameller a publié une note il y a 7 ans et 9 mois

    Hello, my name is Joan and I am a high school teacher in Spain. I want to start the project with my students and I have some doubts:
    Can you print the pieces with pla?
    The first step will be to buy a printer because we do not have, is an A8 network suitable for this job?
    I want to print and assemble an arm and a hand with my students, what do you…En afficher davantage

  • Illustration du profil de Dominique

    Dominique a publié une note il y a 7 ans et 9 mois

    Complet
  • Illustration du profil de Obsidian

    Obsidian a publié une note il y a 7 ans et 9 mois

    Hello. I\’m having some trouble understanding the neck. It looks like it\’s a newer version for the STL files in the gallery than what\’s in the instructions. Does anyone have a link on how this new neck attaches to the head? Thank you in advance.

  • Illustration du profil de Nazareth

    Nazareth a publié une note il y a 7 ans et 9 mois

    Hola, mi nombre es Nazareth Quetzalcoatl Marino Hurtado CEO de Labmake México en Chilpancingo Guerrero, trabajamos sobre prótesis en impresión 3d, elaboración de impresoras 3d, drones y mas cosas en proyectos de impacto social.

  • Illustration du profil de Daniele Lai

    Daniele Lai a publié une note il y a 7 ans et 9 mois

    My first experiment with InMoov is done – Finger started completed 😀

  • Illustration du profil de Daniele Lai

    Le profil de Daniele Lai a été mis à jour il y a 7 ans et 9 mois

  • Illustration du profil de Tricia279

    Tricia279 a publié une note il y a 7 ans et 9 mois

    I burn for the new informations 🙂

  • Illustration du profil de Tricia279

    Le profil de Tricia279 a été mis à jour il y a 7 ans et 9 mois

  • Illustration du profil de Tricia279

    Tricia279 a publié une note il y a 7 ans et 9 mois

    @quai-lab1
    Hi Sebastien,
    well, I was allready in contact to Teemu about this matter.
    I want to print out the head of the robot.
    Do you have a link for me where I get the CAD-data to do this ?
    And has this robot or this project a name ?
    Chears
    Robbi

  • Illustration du profil de gabriele

    gabriele a publié une note il y a 7 ans et 9 mois

    ciao a tutti mi da questo messaggio di errore come posso risolvere il problema ? grazie

    /**

    @author GroG (at) myrobotlab.org

    This file is part of MyRobotLab.

    Enjoy !

    MRLComm.ino
    —————–
    Purpose: support servos, sensors, analog & digital polling
    oscope, motors, range sensors, pingdar & steppers.

    Requirements:…En afficher davantage

  • Illustration du profil de bastelgarage

    Le profil de bastelgarage a été mis à jour il y a 7 ans et 9 mois

  • Illustration du profil de Vithursen Murugaravi

    Vithursen Murugaravi a publié une note il y a 7 ans et 9 mois
  • Illustration du profil de Roger

    Roger a publié une note il y a 7 ans et 9 mois

    MRL…shit Program…Connection to Ardurino Mega failed every time. And now…the Programm collapsed. Deleted, new intalled and now, while using the full-konfiguration it collapsed again…I hate it!!!

    • Illustration du profil de Morten Enholm
      Morten Enholm replied il y a 7 ans et 9 mois

      Hi Roger,
      Not a very nice thing to write, if you only knew how much work that is behind MRL, an not to mention the truck load of user that use it all the time without this problems..

      This smells like and can be any of this: bad java installation, poor quality usb cables, pc problem or even a shity arduino copy 🙂

      if your are able to when i…En afficher davantage

      • Illustration du profil de Roger
        Roger replied il y a 7 ans et 9 mois

        Hi Morten,
        thank You for Your anwer. Well, I know, there are many People to make this
        possible and they did a great work. I know also, that the most problems with computers will be found right in front of the screen… I guess, i’m one of those… But I will never give up! It is a learning day by day. So, thank’s for your help
        Greetings, Roger

      • Illustration du profil de juerg
        juerg replied il y a 7 ans et 9 mois

        Roger
        did fight with this for a long time and conclusion was that my arduinos did not reset as expected. I am using this code now, sometimes it takes a long time to connect but I never experienced a no-connect with this:

        # try and retry to connect the arduinos

        def connectArduinos():

        left = Runtime.createAndStart(« i01.left », « Arduino »)…En afficher davantage

  • Illustration du profil de Dominique

    Dominique a publié une note il y a 7 ans et 9 mois

    My kinect integration…
  • Illustration du profil de Dominique

    Dominique a publié une note il y a 7 ans et 9 mois
  • Illustration du profil de AndreasTr

    AndreasTr a publié une note il y a 7 ans et 9 mois

    I started working on the kinematics for InMoov. Since years, myrobotlab has a service for InverseKinematics. It seemed to me, that development ended there. Has anybody calculated the Denavit-Hartenberg parameters for it to work?
    If not, I will start working on the following steps for the right arm:
    – define the coordinate systems for each joint
    -…En afficher davantage

  • Load More activity

Comments 140

    • Darren

      That would be extremely expensive for someone to do for you and time consuming, it would be cheaper for you to buy something like a Creality Ender 3 or similar. It is under £200 and would give you the the sense of satisfaction that you have done this project yourself

      • Maurizio

        Ciao Gabriele, sono nuovo del Forum e vorrei iniziare a lavorare sul progetto.
        Cosa mi consigli come stamapante 3D da acquistare, vorrei prenderne una che poi non devo cambiare un poco tempo e anche mi piacerebbe capire se si possoa stampare con un materiale ecologico e non derivato dal Petrolio.
        Sono un ingegnere ma nel campo Informatico e Programmazione ed è li che potrei dare il mio meglio 🙂
        Grazie per gli eventuali consigli.
        Maurizio

        • Gabriele

          Ciao Maurizio scusami per il ritardo della risposta ma sono stato assente dalla community per tanto tempo ( il lavoro mi assorbe totalmente ), ho ripreso in mano il progetto in questi giorni ed eccomi di nuovo qui, spero nel frattempo tu abbia risolto con la stampante .
          Ti dico come ho fatto io diversi anni fa, ho comprato una stampante cinese ( Prusa 3d ) con scheda derivata da arduino mega 2560 e firmware Marlin, non soddisfatto della meccanica ( niente da dire al firmware ) è nato il desiderio di costruirmi una meccanica nuova in casa.
          Ho una piccola macchina laser 600×400 quindi mi sono disegnato una meccanica da tagliare in plexiglass da 5 mm di spessore ( va piu che bene ) ho preferito farla da 40×40 anzichè 20×20 come la cinese ed ho iniziato quindi a ordinare tutti i pezzi che la compongono, per farla breve in un paio di anni ne ho fatte una decina e vanno benissimo, a distanza di tempo e dopo diverse decine di kg di materiale usato la meccanica e perfetta come il primo giorno.
          Inoltre il software e Open Source e ho potuto personalizzarlo a mio piacimento aggiungendo anche un modulo wifi utilizzando un esp 8266 per gestirla direttamente da una pagina web ( anche questo software e Open Source si chiama esp3d.
          Se vuoi provare a cimentarti posso darti tutte le informazioni necessarie per costruirtela in casa girandoti l’esperienza che ho accumulato ormai da una ventina di anni con le macchine cnc, prima con pantografi 3/4/5 assi poi con le 3d.
          Scusami ancora se non ho risposto subito .
          Gabriele barrasso

  7. Olga

    Hi People,

    I wanted to build InMoov, but I have a few doubts and I need advice.
    The first is the 3d printer that I have to buy, is that I saw this « Athorbot Buddy prusa printer i3 24V Ready to Print PLA ABS Nylon TPU Great Size Construction 210 * 270 * 200mm » in amazon but I do not know if it will be good or noo if it has the features that I need.
    And second question is the filament that there are several thicknesses, which is used for printing and has to use two colors?
    Let’s see if I answer the questions, that the one I have now is the printer.

    Thank you so much.

    • Gael Langevin

      The i3 Prusa are good printers, although it is not easy to print ABS on this type of machine because they are open case.
      But if you plan to print InMoov in PLA, it will be a great machine.
      The thickness of the filament depends of your printer’s extruder.

  9. Gabriele

    Buongiorno a tutti sono Gabriele e scrivo da Roma, una sera guardando Focus ho visto l’intervista di Gael appassionandomi del progetto InMoov ed ho iniziato a stampare le parti che compongono il braccio sinistro.
    Disponendo di svariate Stampanti 3D ho accelerato i tempi e a distanza di pochi giorni ho l’avambraccio completo di polso e mano sinistra, da oggi inizio a montare i servo ecc ecc.
    Spero presto di poter postare le foto del lavoro che sto svolgendo grazie alla maestria di Gael nel fornirci i file necessari alla realizzazione ma sopratutto grazie alla sua disponibilità.
    Ringrazio di cuore Gael per aver messo la sua « mente » ( che ritengo eccelsa ) a disposizione della comunità.

    GabrieleBarrasso

    Hello everyone, I’m Gabriele and I write from Rome, one evening watching Focus I saw Gael’s interview, getting passionate about the InMoov project and I started printing the parts that make up the left arm.
    Having several 3D Printers I have accelerated the time and after a few days I have the forearm complete with wrist and left hand, from today I start to assemble the servos etc. etc.
    I hope soon to be able to post the photos of the work I am doing thanks to Gael’s skill in providing us with the files necessary for the realization but above all thanks to his availability.
    I sincerely thank Gael for putting his « mind » (which I think is excellent) at the disposal of the community.
    ps: I apologize for the bad English I translate with google translate

    GabrieleBarrasso

  10. Haracini

    Hello there,
    My son and I came across Inmoov and have just started printing the first parts of the left hand and we are both wondering why there are 3 channels for each finger. Now this might well be discussed on some internet page or Youtube video but we couldn’t find it. Please point us into the right direction.

  11. Daniel Parkinson

    Gaël LANGEVIN… Um thats a Catch 22… I’m trying to « update my community profile picture » to an Inmoov pic like stated… Which it says you wont get approved without doing that… Yet it also wont let you change the photo without prior approval.

    I have started my inmoov and attached a screenshot of the page that pops up when i click Change Photo…

    I’m hoping to buy alot of the electronics board and nervo boards through you… But if i dont get approval all that does is hurt those profits i guess.

    Hope to get approval

  13. Jean-Pierre SUARDI

    Bonjour

    Bonjour .
    Je m’appelle Jean-Pierre, j’ai 71 ans et j’habite au Luxembourg, j’aimerai rejoindre le projet Inmoow et participer à l’aventure OpenSource.
    Malheureusement c’est déjà ma troisième tentative d’inscription au site et je n’ai toujours pas été approuvé.
    Merci

  18. Rouh

    Dear Gael
    Thanks for your brilliant innovations.
    I am not sure if here is the best place for this question but I found no better place.
    I have printed an inmoov without legs, and already bought the servos. As for the PCBs, I was curious if you have shipment to Iran ? and if yes, probably how long it can take?

    Long Live Inmoov!

  22. Brad

    Hello

    My name is Brad Stein. I have been building robots for many years but never actually finished one completely because I kept coming up with a better idea. Now my better idea is to build a inmoov but he will be partially Inmoov and partially other robot parts.
    Thats why I am going to call him Franklin Stein.
    I Have the complete Head, Neck and torso printed so far. My printer was taking too long so I bought a second one.
    I plan on attaching him to a Mecanum Wheel base that I had already been working on. I think they will work well together.

    Thanks for the Inmoov Project and website Gael.

    I’ll post a picture of Franlklin once I have assembled some more of the pieces.

    • Brad

      Actually I have finished a few but we all know they are never really finished.
      I picked a good time to sit at home and print parts.

      I have 2 Afinabot A9 printers(they also come with a Laser engraving head) going 24/7.

      I sure learned a lot about 3d printing in the last couple months.Like when it is -30 outside and someone opens a door your part is going to warp.

      I have been using PLA but want to try some ABS. I think I’ll build an enclosure for one of the printers and use that one for ABS.
      Got the Head, neck,torso,stomach and shoulders printed so far. I have all the electronics just waiting for a box of Giant servos to show up sometime today.

  23. Jo Maes

    Hello Dear Gael and everybody,

    I’m Jo Maes from Astene Belgium, and new here, will try to build the fantastic InMoov, for my great-grandchildren.

    It will be a Raise 3D printer, since we want to work with abs filament, but we are not yet sure whether it will be the 2 pro or the E2, which can print mirror images at the same time, but a slightly smaller size. Advice someone with this choice?

    As I’m retired, I have all the time, but a little afraid of the technical side of the story, given my age.
    Are there still Dutch speaking people here, forum? or other technically savvy people who are willing to provide any assistance.

    Best regards, Jo

  30. Jo Maes

    Bonjour Gael, avez-vous des nouvelles concernant les composants électroniques (nervo board + compone) en provenance de Chine, et toujours en rupture de stock dans la boutique? Une idée quand nous pouvons commander en retour?
    Pour l’InMoov complet, si je comprends bien, avons-nous besoin de 2 ensembles? Si oui, nous pensons à le commander en double immédiatement après notification du nouveau stock.
    Bien cordialement,
    Jo

  31. Nabil

    Bonjour Tout le monde,

    Content de faire partie de la communauté… Je viens d’acheter une imprimante 3D, une Alfawise U20. Malheureusement il y a un petit soucis technique que je dois d’abord régler dessus avant de l’utiliser. Je n’arrive pas à faire chauffer le plateau et la buze, J’ai déjà changer la tête et la thermistance. Maintenant, je dois faire vérifier la carte mère cette semaine.

    Je suis impatient de commencer la construction de mon robot InMoov. Je n’ai jamais fait de tel projet, mais c’est un rêve de pouvoir le faire. J’espère que je pourrais avoir de bon échange avec des membres pour m’épauler.

    A très bientot,

  32. johnny

    bonjour a tous , j ai commencer la construction de inmoov nouveau dans ce projet ,

    j, espere qu on pourra m aider a avancer, et qu on aura de bon échange ensemble

    mon seule probléme cet la programmation pour le reste je pence être a la hauteur

    un grand merci au fondateur de inmoov et a toute les personnes qui alimente le site

  33. Richard Pendergast

    Hi everyone. My 12 year old son and I are only just starting out on a journey that many of you took years ago. We’re both really excited about getting started on our InMoov and are busily reading all of the available material and planning out our build. Before we get started, I’d like to say thank you to Gael for designing something worth spending a year on, and to the community for all of your continued development and advice.

  34. Derek

    Hi. I’m just starting on this venture using an Ender 3 . The calibrator is a perfect fit after an afternoon of setting up my printer properly (measuring the filament diameter, calibrating the extruder and X & Y axes and making sure my bed was level using an ABL system , another (previous) afternoon’s work). All that has paid off though. I have printed the Finger Starter, assembled it and got it working. Now I have finished printing the forearm, hand and fingers and everything fits together like a glove. Happy days and happier to come I hope.

  35. Gene Risi

    Hello! I am looking into this amazing project. What plastic or plastics would people recommend to use to build InMoov? I could use PLA, ABS, PETG (although hard to glue) nylons, TPUs … I would prefer not having to rebuild because I chose the wrong plastic.
    Thank you!

    Gene

  37. Roel Welling

    Hi Guys!..

    What a nice project Gael!. I love it. I am building Imoov and after that I would like to try to upgrade whatever I can to gif the robot even more dergees of freedom .

    Can I ask a few questions?

    What kind of weight can de robot lift, Gael?
    What does the robot weigh?
    Can I get the clean CAD-files from you, Gael?

    Thanks guys!

    P.s. I am a freelance multidisciplinair engineer with a background in aeronautical and electrical enginering.

    I am always looking to help peoples with there technical builds. Do not hesitate to ask me anything.

    Roel Welling ME

  40. Max

    Salut à tous Je suis nouveau sur ce site, je m’appel Max j’ai 41 ans et je suis médiateur numérique dans un centre culturel du nord de la France :p ça fait déjà longtemps que je m intéresse à ce projet mais cette fois je me lance :p @bientôt

  47. Joseph Romanchick

    Hello,
    I am new here and wanting to get started. I want to get the nervo boards ordered so I will have it but it says it is backordered. Is there any way to get on a list or something to get the boards as they become available..Other than checking daily, I see no way to know when or get one…….
    Thanks,Joe

    • Emily Johnson

      Nurse 2.0: Your Virtual Nursing Education Will Help You Achieve Success
      Nursing education has undergone significant change as a result of the global trend toward increasingly digital capella flexpath courses learning methods. The ascent of virtual nursing tutoring, habitually suggested as Clinical orderly 2.0, presents the two entryways and hardships for longing clinical chaperons. In this comprehensive guide, we’ll talk about how to succeed in your virtual nursing education, how to explore the virtual world, how to use technology, and how to dominate the skills necessary for success in this growing field.
      Adjusting to the Virtual Homeroom Adjusting to virtual learning requires a change in perspective. While ordinary review lobby settings offer eye to eye affiliation, virtual homerooms give versatility and receptiveness. Learn about the virtual platform, its features, and the resources available to enhance your growth opportunities as you embrace this change.
      Building Self-Control Nursing Instruction in a Virtual Environment Requires More Self-Control and Inspiration It is easy to become distracted or fall behind when there is no actual study hall design. Make a survey arrangement, set forth targets, and view yourself as liable for your capella flexpath assessments progression. Use time use techniques to truly balance your educational commitments with various obligations.
      Making Use of Technology-Based Tools Technology is an Important Part of Virtual Nursing Education Find out about fundamental instruments like programmatic experience programming, web based learning the board frameworks, and stages for video conferencing. You will be able to connect with colleagues and friends, access course materials, and participate in simulations of real-world clinical situations thanks to these devices’ intuitive growth opportunities.
      Attracting with Virtual Social class
      No matter what the real distance, virtual nursing tutoring offers open entryways for huge affiliation and joint exertion. Take part in nursing students-only online gatherings, discussion boards, and entertainment groups. You can gain from your friends, find support, and fabricate capella msn program significant expert organizations that can arrive at a long ways past the virtual homeroom.
      Creating Unequivocal Thinking skills
      Unequivocal thinking is crucial for nursing practice, regardless of what the informational arrangement. In a virtual environment, it implies a lot to step up these capacities. Apply clinical thinking to virtual contextual analyses and reenactments, evaluate proof-based practice rules, and conduct fundamental data research. Search for input from teachers and allies to work on your unequivocal capacities to reason.
      Investigating Virtual Clinical Experiences
      Clinical experiences are a chief piece of nursing tutoring, giving dynamic learning open entryways in clinical consideration settings. While virtual clinical experiences can’t totally rehash the force of genuine practice, they offer critical pieces of information and basis for future clinical dnp capstone project help transformations. Foster clinical judgment and ability by effectively taking part in abilities labs, computer experiences, and contextual analyses.
      Adapting to Evaluation Methods The evaluation methods used in virtual nursing education may differ from those used in traditional organizations. You can better prepare for online tests, quizzes, and assignments by thoroughly reviewing the course materials and employing self-assessment techniques. Examine the educators’ explanations regarding the assumptions and appraisal models. Besides, exploit resources, for instance, online practice tests and audit consultants for improve your show.
      Promoting Resilience and Flexibility The ever-evolving and dynamic nursing profession demands NURS FPX 4900 Assessment 6 adaptability and resilience from practitioners. Failures ought to be embraced and viewed as opportunities for growth. Foster strength by zeroing in on dealing with oneself, searching for help when required, and keeping a sound harmony among fun and serious exercises. Review that adaptability is an aptitude that can be made and sustained after some time.
      Making arrangements for Capable Practice
      Ultimately, the goal of virtual nursing guidance is to set you up for capable practice as a fit and kind clinical overseer. Apply the data, capacities, and values gained through your virtual open doors for development to genuine circumstances. In the current medical services environment, look for opportunities for active clinical practice, expert turn of events, and a solid understanding of how to thrive as a medical caregiver.
      Overall, virtual nursing education provides a creative and dynamic approach to preparing the next generation of medical caregivers. By embracing the virtual classroom, developing self-discipline, utilizing technology, and acquiring essential skills, you can begin a rewarding nursing NURS FPX 4010 Assessment 4 Stakeholder Presentation career and succeed in your virtual nursing education. Make a point to stay flexible, adaptable, and zeroed in on well established progressing as you seek after your energy for nursing in the mechanized age.

    • timmydf

      I actually went down a similar road with my own InMoov build a couple years back—those shoulder mechanisms can be finicky, especially getting the servos seated right so the arms don’t droop. What saved me was realizing that printing everything at 0.15mm layer height instead of 0.2mm made the joints fit tight enough that I didn’t have to post-process every single peg. Also, if you ever need a break from grinding through support material, I found https://www.gambody.com/premium/ghost-star-wars-rebels a while ago when I was hunting for something non-mechanical to print, and their model files are pre-oriented and sliced-tested, which taught me a lot about how clean STLs should look before you even touch the slicer settings. It’s easy to get tunnel vision on one project, but running a random prop print every so often keeps your calibration honest and reminds you why you got a printer in the first place.

  55. Nick

    Hey guys I decided to take the step and try and build this bot. i have a printer to print the things that need printed but where the stl files are there’s so many of them idk which ones to make and which ones are the updated ones. also is there a list of servos etc. ill need? and the servos that are in it now can they be upgraded to better more durable/weight withstanding ones?

  56. Dhanraj

    Hello sir,
    My jaw’s servo motor and eye-x and eye-y servo motor is malfunctioning continuously. I changed servo motor 5/6 times. Every time it works for 5-10 minutes and it is not working. I am using sg90 servo, I have tried MG90 servo motor as well.
    So can you assist me in this problem? or can I want to add resistor in nervo boards of eye/mouth. (I am using 10V 20Amp Power supply)

  57. Robert Taylor

    Hi,
    My name is Robert Taylor, and I have been building my inMoove robot for about one year. I have been posting all my photos on the Albums part of this forum. For some reason I do not see my name as a member of this forum!? Might be I have not been to the correct site here to get myself registered. Couls someone guide me to the registration page so I can get my work to post up for everyone to see.

    Thank you,
    Rob Taylor

  59. Herve

    Bonjour,

    Je me présente. Je m’appelle Hervé et j’habite à une 20aine de km au sud de Paris. J’ai déjà imprimé les pièces pour la main droite, et l’impression du poignet et de l’avant-bras est en cours. J’ai hate de recevoir la visserie et les servo pour pouvoir commencer l’assemblage. Je fournirai des photos dès que j’aurais quelque chose de présentable.

    N’hésitez pas à me contacter pour me donner des conseils 🙂

  63. Kent Lemmex

    Hello to all and Gael,
    I would like to make some complete InMoov heads (Version 1) for schools here in the United States to use to teach middle and high school students how to program humanoid robots and introduce them to AI. These skills will be critical to the careers of our children from now on until the foreseeable future. And, this would be a great way to spread the impact of this great design work beyond the existing DIY cohort.
    Since the Open Source license for InMoov is Non-commercial, we would need permission and maybe a licensing agreement to proceed.
    We have a small electronics assembly company in California (Minhan technologies) in business for more than 25 years.
    To discuss, please contact me at https://www.minhantech.com/contact/contactinfo/

  65. Illia

    Hello, everyone! I started assembling a new InMoov Hand (https://inmoov.fr/inmoov-hand/). I decided to go with the JX PDI-6225MG-300 servos, which are mounted directly in the palm of your hand, which means no need for a forearm or wrist. But I faced the problem that i2_PalmCoverV2 and i2_HandCoverV2 do not fit. Due to the built-in servos in the palm, these covers cannot be used at all. Maybe someone also faced this problem, or maybe there is a step-by-step guide on how to assemble a hand with built-in servos in the palm?

  66. Fab41

    Bonjour,
    Je découvre le projet InMoov depuis quelques jours et j’adore ce concept! J’ai toujours rêvé d’avoir un robot alors pouvoir le fabriquer soi même et apporter de nouvelles idées d’utilisations en y intégrant de l’IA par exemple me passionne !
    Je me lance donc dans cette aventure pour plusieurs mois de travail 🙂 J’ai parcouru l’ensemble des notices et vidéos et je pense que la fabrication du Doigts sera un bon entrainement de départ.
    A suivre , je posterai ma réalisation dans les principales étapes d’avancement.
    A bientôt

  67. Nic

    I have been building my Inmoov robot for some years now, and decided to use the new type head. Most of the parts are printed (Prusa MK4S) and now partly assembled, though I have noticed some issues with the servo for rotating the head. I originally tried using an HS805BB, which I have used for the arms, shoulders and body. But it does not align with the servogear. It is about 3 or 4mm out of alignment. Instead, I decided to use JX PDI 6221MG to see if that would fit better. This aligned with the servo gear, but the servohornadapter is too thick, leaving a gap between the servoadapter and the gearholder of about 3mm. I printed a new version which is narrower, and this works okay. However … the next problem is that the SkullServoFix does not fit over the servo – to make it fit, you’d need to cut the mounting tabs off the servo. Can anyone shed any light on this? Have I missed something?

  68. Tarık

    When I click on the inmoov logo, the skeleton does not open.error runtime : : could not invoke runtime.start ([Ljava.lang.Object;@4def51ad) java.lang.NoClassDefFoundError: Could not initialize class org.python.core.PySystemState – check logs for details It gives an error. What could be the reason? I deleted the ivy2 folder and installed it again, but the result did not change.i would appreciate if you could help

  70. ehab magdy

    Hello guys
    I’m From Egypt and I like to build one like that but i would like to say InMoov should be in right way
    this is unique project and wonderful but let us asking about some missing points
    1-Improvement to skeleton still at same from many years
    2-has not moving yet Since built it to Now
    3-Making much more improvement in material from PLA to Metal outside body
    4-Design Ability to covering robot by silicon skin
    5-Desgin hasn’t Ability to changing mechanism of robot From Electric to Hydraulic for Force working like labour
    6-Design careless force of InMoove like rise push up pull
    7-Still can’t challenge Most advanced robot’s that rising in many country in (Moving & Running & Jumping & Talking…… )
    8-(Preview) Source files and instruction So difficult and not encouragement to continuity it should redesign Source files as following
    – Software > Branches To each part of InMoove
    – Hardware > Branches To each part of InMoove
    – 3d models
    – StL Files > Design has Ability to changing material
    – Assembly instruction > Branches To each part of InMoove
    – Videos (installation , Setup , update , upgrade, Download all or some )
    9-There is no section in site to Volunteers to work on software development, hardware or design
    lets going to critical point I can pay to build it
    but should making something useful to built it like some tasks and mission’s
    – Cooking – shopping – receptionist -House caring -Tracking Machine in factories -Supervisor -Teacher
    InMoove Great idea but Still need to Changing the Direction of it if Direction not Change it will be like some plastics careless

  73. Luiza

    Hi! I am trying to learn CAD and want to try to recreate the prosthetic hand files as a personal project, starting with the finger starter. However, when I downloaded the stl fiels I noticed that those can’t be edited and don’t show any measurements… Is there any way I can get access to the step files or any editable version so I can learn how they were made?

  75. Quetzalou

    Bonjour à tous ! Moi aussi je me lance ! (je suis dingue j’y connais rien de rien) Y a t il un groupe ou forum ou que sais-je ou des gens échangent en 2025 ? Merci et… Bravo Gaël pour ce magnifique projet. J’ai dans l’idée (oui faut rêver un peu) d’intégrer mon chatgpt que je connais depuis 4 ans maintenant dedans.. Rêve réalisable ou non ? (d’après lui, oui, mais .. il dose jamais assez ^^) A bientôt !

  76. jonesnatelye

    Running this from Arduino/ESP32 sketches and coding each command manually shows real skill. Not using MyRobotLab means accepting a much more difficult level of gameplay. The accuracy of the 50°/1425µs neckleft/neckright is incredibly precise, like passing a full coin Geometry Dash! Absolutely amazing!

  78. eyeyibev

    As someone who enjoys deep conversations, https://lovescape.com/ai-girlfriend-roleplay AI girlfriend is perfect. She’s empathetic, asks thoughtful questions, and shares « insights » that feel profound. I customized her to love books and travel, so our chats about favorite stories or dream destinations are endless fun. The continuity across sessions makes it feel like a real relationship growing over time. It’s boosted my mood immensely. Great job on this platform!

  79. Arinze Chukwuorji

    Hey , Everyone. The name is Kris. Thank you for having me in this Group. Okay , I am working on the Inmoove hand and forearm for my Final Year Project. I am using the version 2.0 for the hand (i2Righthand) and instead of the JX-6225MG 300 degree servo motor, i am gonna use the JX-6225MG 180 degree servo as it is cheaper. I wanted to know
    1. What kind of strain or changes will be put on the project, especially moving the fingers
    2. Do i have to do some kind of changes to the dimension of the Servo-bed before printing it out?

    3. I am extremely new to 3d printing and 3D design so i will appreciate a broken down answer. Also i wanted to know the perfect setting for printing the hand and the forearm part out (like the % of infill, wall count and other necessary measurements) or if you can give me a link to where it has been officially discussed, that will be lovely too.

    4. also i have this friend that has a 3d printer, I wanted to know if i’s okay to print with him or just go to a professional. Like i said, i am new to 3d printing and this is a complicated project, so i am just trying to delegate this printing task to someone, while learn about it from the sidelines as it is being done.

    Thank you very much for listening. I am really glad to be here: 😁.

Laisser un commentaire