They are standard sized servos from Amazon,I will check the type.

I will need to upload them to Thingiverse or something like that. Since I changed the worm gear you don’t need all the clearance around the old servo horn area which allowed me to reinforce that area substantially. I used the bearing sizes that you recommended in your post

No worrries Perry,,, i thought is was rather cool and worth sharing 🙂
P.S- I posted one more that is very interesting

Lol,,, next pic will be with Inmoov ,, I’m 35yo in this pic and i just turned 40 –,,, Still look the Same which is kinda weird – ,,lol

Thanks Lecagnois!

Your right,,, i just looked at some photos of the build process and Mr Gael just turns the piece around like you have,,,, so there should be a problem,,,,

BTW, where you get so nice schematic?
I was trying modify files using solidworks, but STL is not best format to edit for me

Yep,,, there so handy for testing new frames designs without having to spend a lot of money,,,, i’ve got x4 Arms in testing stages so that around $1200 if i had run real servos,, there only usefully for people like me he do a lot of Mod work on the Structural Frames –( but thought i would post them anyway)– almost got a printable gear drive and…En afficher davantage

Currently using PLA+ by Esun –,, its tough as hell ( flexible ) and it doesn’t swell like other filaments but getting a good surface finish took a while to tune-in,,,,, great for prototyping parts never have a first layer issues on cold beds and its cheap,,,,,, this is a pic of the Screw/Bolt Together Arm — got to some more mod work the B…En afficher davantage

Thanks Mindless!

Well, I am waiting for some components from AliExpress which need to be tested before release. Just for info this is already my third knee design, which all three were pretty different. R&D takes a long time and my problem is that I don’t only work on the legs.

Nice! Added to the derivatives:

InMoov parts and derivatives

No worries,,, I’ll download the new V3 Parts,,,,
I really should of checked that out first but it didn’t even occur to me to have a look for a updated part,,,, anyway cheers mate–,,

I Tried, but the Ball joint was very limited in it’s movement, so I reverted to using 3D printed parts.

Mine actually made themselves two parts after a couple of days use. No CAD needed. I wanted to preserve the original geometry because it offers about the right range of travel. So I glued them back on and instead of a short bolt I thru-drilled the hole and placed a much longer bolt through it. The bolt passes through the neck and into the…En afficher davantage

Nice prints!
As you know I print InMoov in ABS, and try to print everything without support.
I print the worm gear and bicep piston parts without support.
I never run fans in my printer to cool down the parts, but I have set an aquarium pump with a tiny tube that travels all the way to the printing head, which then blows precisely an air stream…En afficher davantage

Yes. You guessed it. I am from Vermont in the US. Up here by Canada. All snow, no sun….The chicks are all covered in flannel.

Ha,,Ha ,,Why didn’t I think of that,,, I’v got boxes full of useless parts that I’ve been saving until I can find a way to recycle them—Cheers Perry-

Ohhh ,,,,,What section of the hospital do I go too for 3rd and 4th degree burns,,?

Ohhh,, I get your get Question now– ,,, I will be re-cutting the Chest plates for 20×20 Beds I done some minor work to them so ill re- upload the new ones once I make sure the bearing are all good ,,, surprisingly the will be backward combatable – this it just a test run ,, they well go in the bin when I’m finished–,,

very beautiful. it happens almost right on the ceiling.

@mindless Actually there are fitment issues if you try to move the legs. Portions of the upper thigh hits the waist. Dremel fixed that all. No other big surprises. I didn’t use the internal reinfordcements or threades rode.
It is obvious they are pretty much for display and they do not have the degrees of freedom needed to function. Still they are cool.

That’s because it runs on Zero Point Energy with a Gravity Warp drive as it’s back up power,, you cannot see the the Gear Train because its imbedded in a Cloaking Device,,,, Come on Perry everybody know this,,,,

Great progress Perry!
How does it feel to see InMoov with legs?
It took me a while to get used to it.

No worries Mr Gael,,, always willing to help out whenever possible-

PS- I did not realize that the latest Part updates where at the Bottom the page and not at the Top,,,,,,, (not really sure if Ii should have admitted to that)

-=Mindless=-

Design,,, Print,,, Test,,,, then Repeat until it Works,,, lol
I post Pics of the CAD files so its easier to understand what the parts are doing—
This Adjustable Pot System is almost finished have done about 14 prints to get it correct,,, it has been very tricky to design,,,, has been implemented in the Elbow / Biceps / shoulder so far,,, the p…En afficher davantage

So beautiful !! Thanks Gael
1/2 Ash is really happy : i can ear him singing in his workshop : « …/…
Your vagabond shoes, they are longing to stray
…/… »

Thanks, I hope your InMoov enjoys them

Merci William!

Hello, you can find them in the gallery:

InMoov body parts library :

@mindless, I too have posted a picture with no errors and then thought maybe it did not post and reposted and still not see it. I logged out and still not see my posts, cleared all cookies and started seeing them again? But I’m still not sure way.

Hay Ray,, Sorry for the late reply but I just noticed your message which is weird,, I’m sure it wasn’t there before– ,,, anyway Han’s Tracked down the Main Bearing a while ago
Main Bearing is – 45mm x 55mm x 6mm – the small bearing is 8mm x 16mm x 5mm which is slightly smaller than Han’s bearing,,, I’ll be using the 16mm x 8mm x5mm in a few of…En afficher davantage

I have the flux capacitor mounted behind it.

Perry, that is just what I need. That back looks like a single piece, but is several parts! Your InMoov is really fantastically finished. I need switch fillers if you are 3D designing any for the back?

Hi, I combined parts prior to printing then I sanded, filled, sanded, and painted the major parts.

Looks awesome!