Hi Perry,

he looks sad, he needs a girlfriend. 🙂

How is it working in SketchUp with the native STL files?

Thanks for the image. I’m adding it into the tutorial 3Dsketch views. It will certainly help other builders.
Sketchup works pretty well with STL as long as the files do not have too many vertices. Many CAD softwares like to abuse with curves on all the edges and corners, which creates super heavy STL. Sketchup may then start to be very laggy. My…[Read more]

Hello Mindless,
Thanks for posting the picture. I have added it to the chest and torso 3D sketch view.
I see you do not have my ThroatLowerV1.stl, but a variation, which might confuse some builders though.

Looks awesome Perry !
It’s a nice option to use the default servo’s 🙂

And are you happy with the mechanical results ?
For you it’s better to see and feel the results instead of the default setup 🙂

Great Perry, I see that there is many inventors around!

Great work. I used your previous version on my head. Really liked the streamlined look.
Will you post thes files up?

Great Mindless!
Just for info, there is some parts already available in the InMoov derivative collection, but I’m sure you must have seen them already.

Hi Perry,

It’s nice to see your idea about this.
I think I will see your complete setup tomorrow, I hope it works well and I can’t wait to see a video !

Keep up the good work 😉

Cool design Perry,
this is nice to give room for the tendons to run straight out from the wrist to the Servobed.

Nice job! Are you going to share the design? I would sure use it as I don’t have an on board computer either. Thanks

Great work and very nice adaptation. Which software do you use for to do that?
It doesn’t look like Blender. It’s interesting to know because other builders might be interested to see how you re-worked your parts with only the STL at start.

Thanks for the explaination Perry.
When exporting from Blender to STL format I use a plugin within Blender to check if parts are clean without inverted facets. This plugin did not exist when I started InMoov project, therefore some of my first parts could not come out clean
🙂
One of the reasons I do not create parts with too many round edges,…[Read more]

http://www.thingiverse.com/thing:1656088

PS: removal of the slurry ABS on the glass after print is done, simply run under cold water tab and it will detach itself like magic. Dry the glass plate and you are ready to go again.

Hi Gael – great info thank you.what is the consistency of the ABS slurry you use. your prints are look great.

Hi Gael
I still think you should give HT-PLA a try and use a print plate that will not need any slurry or tape and allows to remove items by just picking them up from the cooled out print bed!

i am making inmoov right hand so can i get the Tensioner.stl file for it please i am not getting it anywhere can you please provide me the link of it

wouaaa it is hotttt lol
amazing

Uhh, Uhh, my printer manufacturer had changed his print bed product line to make it almost impossible to overheat it (you could fiddle with the control SW however).
I assume some workshops could run into serious problems having the printbed burning through.
Think about switching to PLA-HT (or HT-PLA) which is as good as ABS but prints on a 50…[Read more]

This is awesome! The 2 topmouth pieces have always been kind of a pain to work with, so that will help alot.

Ahhh, great, I had started to add flabs n stuff to keep them from falling apart.

Thanks Gael, now I see how it all works. I like how you can detach the drive wheel to push it around manually. See my comments on Sebastiens’s post.

@Bob, to answer your previous questions on Sebastien’s post:
The base can carry InMoov easily. You can add at least 10kg and the base can still ride fine as long as the floor is flat.
When I use InMoov in the street, the wheels can overcome some holes if it rides full speed. If you look at my video, you can see a battery carrier between the two…[Read more]

It is nice to see young people working on things like this.

Thank you very much, was waiting for him, it was what I needed.

thank you gael

Thanks very much Gael!

Awesome Gael and thanks for the files and the tutorial.

OOOhhhh Yes,

This is very good news Gael 🙂
I will soon start printing the head, so your update is just on time 😉

This week I will receive my new _XT filament from ColorFabb.
I hope it’s a good filament to use for most InMoov parts, even for the shoulder mechanical parts.

Other question about the camera, are you still happy with your…[Read more]

Cool and sure, MRL deserved it to get placed at the shoulders from InMoov.

@ Bob Houston,

This looks awesome dude, great work and a cool upgrade to the InMoov !

I can’t wait to see some more video’s with the Eye tracking options 🙂

bonjour tout le monde!
est ce que bob Houston pourrait faire partager a la communauté inmoov les plans et les fichiers stl de son châssis et la colonne sur roue qu’on voit sur la vidéo youtube?
merci d’avance

Sorry for posting so fast Just got excited when I saw the pictures from your trip you posted, when do you think you will release them?

That is a really nice back. Looks good and will protect all the electronics and hide some of the servos.

Really cool!

I hope and i pray that our Inmoov will get legs!!!

Inmoov looks like something from Outer Limits.

Many will need to print, but the robot will go 🙂

Sooner or later, someone will make…

Have you already tried this ? If so, what kind of spring do you use, and where to buy it ? 🙂 (ok, I’m lazy 😉 )

I’m not really into site programming but when you go to activity the bar on the right is not needed any more. if this is removed you might have more room for the videos.

for the comments, Im looking almost every day to see what others are making.
the comments are sometimes low but I think lots of people are watching.

I also found it a bit difficult to navigate the site. I just kept punching around until it functions as it should.
I would also agree with dumping the update stream on the right side but leave the members activity button.

I have found that by using “copy and paste” into the text box is the easiest way to post You Tube videos. It is unfortunate that they are cut in half but by clicking on the name of who posted it, it takes you to the video. I too think that a lot of people look at the site but everyone leaves comments. I know I don’t comment on everything but I…[Read more]

Hello! And thanks for welcoming me. I started my inmoov approximate 2 month ago

yeee