Mes amis – Activités – Marten de Groot

Mindless a publié une note il y a 9 ans et 1 mois

Bob Houston replied il y a 9 ans et 1 mois

OK, I’ll bite. What is it?
- juerg replied il y a 9 ans et 1 mois
  
  ? a brand new dual extrusion head with coolers for the object and the extruders? Cooling the upper part of the extruder can prevent clogging – good. Enjoy the pic – once you start printing it won’t look as good as now!
  for ooze free multiple extrusion in a single object have a look at this
  https://www.multec.de/Extruder_1
  - Mats Önnerby replied il y a 9 ans et 1 mois
    
    It’s a dual extruder upgrade for the Vertex K8400 3D printer from Velleman. I can easily identify it, since I have the same printer for almost 2 years now. It works very well for PLA printing. It makes it possible to print different colors, but more importand, different materials. I tried it about a year ago, but at that time I have print quality…En afficher davantage

Mindless a publié une note il y a 9 ans et 1 mois

Inmoov Original version V1- for SketchUp has just been uploaded- I added the all Potentoimeter (see pic) Not the best looking Potentoimeter but clearly shows where they all go,,,and I added few of the main bolts Which are just Shaft with hex/Socket Heads- so I’ve managed to keep him Low-Res as possible- ,,this will be last update on Inmoov u…En afficher davantage

Bob Houston replied il y a 9 ans et 1 mois

Mindless, I have downloaded your 3D InMoov Man – nice work. Should I be able to move parts around so I can see the internal parts? The drawing loads as a « Read only » file in SketchUp. Or is the drawing just that, a drawing of the assembled parts?
- buildstoys replied il y a 9 ans et 1 mois
  
  Left-click a part (to highlight it in blue), then right-click and choose Hide.
- Mindless replied il y a 9 ans et 1 mois
  
  It a complete 3d model,,, so you hide parts to see inside him- or you make changes to parts then export that part as STL (Need Plugin) and print them out-,,, if your new to 3d modelling it will take a bit of time how to work stuff out,,,- but SketchUp is one of the easiest of the 3d modelling platform-
  The “load as read only” message means its dou…En afficher davantage
  - Mindless replied il y a 9 ans et 1 mois
    
    Sorry about that,,,,,now where was I,,,
    But you cannot work on the same file in two different widows —,, think of it as a “Master and Slave” set up,, the first time you open Inmoov man is the Master and if you open it again without closing that Inmoov the others will be loaded as slaves (read only),,,, and you cannot modify the slave ver…En afficher davantage
    - Bruno.Ash replied il y a 9 ans et 1 mois
      
      I’ve just downloaded your 3D model… WAHOU !!!
      Excellent job, it’s very fun to see the bot in 3D.
      Very convenient for mounting and color test.
      Thanks a lot for sharing

Mindless a publié une note il y a 9 ans et 2 mois

3d Inmoov Man in SketchUp all orignal STL Files,,,
http://www.thingiverse.com/thing:1995318

William hall replied il y a 9 ans et 1 mois

Downloaded these this morning. Very nice.
- Mindless replied il y a 9 ans et 1 mois
  
  Glad you like him,, had to rush the skull pieces cos I lost the original version , The next version I will release has had hundreds of hours put into him- he might look the same but he’s not,,, all the interior parts and Gearbox’s have had complete re-builds,,,plus some of the exterior parts have joined together for larger prints but not mod…En afficher davantage

Mindless a publié une note il y a 9 ans et 2 mois

Here is my 5pc Chest,,

Hutch replied il y a 9 ans

Looks nice! Have you posted the .stl files someplace?

Mindless a publié une note il y a 9 ans et 2 mois

Good question Perry- This is one use of a hundred mods/uses you can do with -3d Inmoov-
This mod allows the servo and gear to be positioned by just loosening and tightening the grub screw- You send the command line to the servo to adjust its position,,—,,then adjust the gear to the position you want,,, and then tighten the screw ,, I wasn’t s…En afficher davantage

Mindless a publié une note il y a 9 ans et 2 mois

-=3D Inmoov in SketchUp is Finished=-
“All Original STL Parts are Used,”- Except for the Fingers and Servo Tray,,,-I will post the file as a single download on Thingiverse tonight sometime-,,,Hope you enjoy

Perry replied il y a 9 ans et 2 mois

I am not sure of the purpose of this but I get the feeling it will be of great use to a lot of people. What should I use this for?
William hall replied il y a 9 ans et 2 mois

That is very cool. Thanks for sharing it!
Wei Xingfeng replied il y a 9 ans

Cool ! SketchUP is very popular and easy to use. By the way, where’s the link to the Sketchup-InMoov?

Mindless a publié une note il y a 9 ans et 2 mois

akash dixit a publié une note il y a 9 ans et 2 mois

hey my ADHVIK 1.0 (InMoov family )hand is ready now

Wei Xingfeng replied il y a 9 ans

this’s your first printted hand ? Much more better then mine. I use the iron-heating to fit the holes.

anthony a publié une note il y a 9 ans et 2 mois

Season’s greetings from Dark Inmoov

Marten de Groot replied il y a 9 ans et 2 mois

HoHo…. HoHo 🙂
- Perry replied il y a 9 ans et 2 mois
  
  Luke, I am your printer
  - juerg replied il y a 9 ans et 2 mois
    
    I want a video of how good he is with his sword – half the christmas tree with a single swipe?
    - anthony replied il y a 9 ans et 1 mois
      
      promise ! lol I will wait the end of the year otherwise it’s my wife half me 🙂

akash dixit a publié une note il y a 9 ans et 2 mois

@bretzel59 i am making bisep so HS-805BB This servo is so costly can i use any cheap servo alternate of this if yes then please provide me the link of that

Mindless replied il y a 9 ans et 2 mois

Nope,,,, HS-805BB are the cheapest out there for their size,,, prices are all over the place with servos-,, have a look at quite a few web-shops before buying- you should be paying around $35usd for them- but check out the “postage cost” before buying ,,,
- Perry replied il y a 9 ans et 2 mois
  
  I use the HK15338. They are the same size and cost $15 USD. Available in the US too.
  - Mindless replied il y a 9 ans et 2 mois
    
    That »s a good price,,, they work alright,,?
    - Perry replied il y a 9 ans et 2 mois
      
      Everything is a tradeoff. They are basically clones and can be modified in the same way as the 805’s.
      A little less torque, a little less speed but definitely usable. I have been happy with them.
      - Perry replied il y a 9 ans et 2 mois
        
        https://hobbyking.com/en_us/hobbykingtm-hk15338-giant-digital-servo-mg-25kg-0-21sec-175g.html
Bob Houston replied il y a 9 ans et 2 mois

Try these ones, they are the same as the HS-805’s but only $27 USD.
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXLN94&P=4#technotes
- Mindless replied il y a 9 ans et 2 mois
  
  Cool,,, I’ll get a couple of them for testing,,, at that price i can fry/destroy them without worrying about it,,,, going to use these in the end (see link) ,, providing i don’t find a problem with them- there a Australian clone of the Savox ,,,, but beefed up,,, not down,,,, bit pricey ,,, but the torque is good, and got the 7.2v option too…En afficher davantage
juerg replied il y a 9 ans et 2 mois

for the large servos I strongly recommend using heat-up fuses so it stops the current before burning up the servo. I anyway had expected that these servos would come with overload protection but the manufacturers seem to like them burning out …

akash dixit a publié une note il y a 9 ans et 2 mois

i am making bisep so HS-805BB This servo is so costly can i use any cheap servo alternate of this if yes then please provide me the link of that

akash dixit a publié une note il y a 9 ans et 2 mois

i am making bisep so HS-805BB This servo is so costly can i use any cheap servo alternate of this if yes then please provide me the link of that

Mindless a publié une note il y a 9 ans et 2 mois

About a week to go and i should have this version finished off,,, This version is for the building process,,, so i have put him together using a lot of Mr Gael original parts,, using SketchUp as the 3d software so anyone should be able to pull him apart and see how he works and it will help with the building process a lot,,, this was a way…En afficher davantage

Mindless a publié une note il y a 9 ans et 2 mois

juerg replied il y a 9 ans et 2 mois

ehhh, nice perspective. looks like a lot of work to position the many parts at the right location and orientation

Mindless a publié une note il y a 9 ans et 2 mois

Back Covers are Done,,,

Mindless a publié une note il y a 9 ans et 2 mois

Hi Guy&Girls- Mr Gael
Yep,,, Done in SketchUp-, Should have the original version of him finished in a few of days-, There will be a couple of versions of him,,, the first version will be the one using 90% Mr Gael original parts so this will be very useful for the building process,,,,,, you learn a lot more about Inmoov having a 3d model of him to…En afficher davantage

Marten de Groot replied il y a 9 ans et 2 mois

Great and Nice work MindLess.
Thanks for sharing your experience with all InMoovers 🙂

Regards,
Marten

Mindless a publié une note il y a 9 ans et 2 mois

amby replied il y a 9 ans et 2 mois

very nice
Michael Hayward replied il y a 9 ans et 2 mois

WOW this and the previous post are GREAT, what software are you using?
- Jeremy replied il y a 9 ans et 2 mois
  
  i think its in sketchup

Mindless a publié une note il y a 9 ans et 2 mois

amby replied il y a 9 ans et 2 mois

very nice

Mindless a publié une note il y a 9 ans et 2 mois

Just Uploaded a Modded version of the Finger Starter Kit Main Base-
http://www.thingiverse.com/thing:1947095
Its a pretty Simple Mod but very handy for R&D on Tendon Experimenting,,,,

akash dixit a publié une note il y a 9 ans et 2 mois

can i got the python script of inmoov right hand and forarm voice controll ?

Mindless a publié une note il y a 9 ans et 2 mois

Just Uploaded the Modded Elbow Joint to Thingiverse- (two types)
Servo Tray and Tension bed will be online in a couple of hours- just panel beating work on the servo tray and tension bed- prints clean and joins together in one piece not two– extra screw/bolt holes- and there is a 2piece version too..

akash dixit a publié une note il y a 9 ans et 2 mois

i am making inmoov right hand so can i get the Tensioner.stl file for it please i am not getting it anywhere can you please provide me the link of it

Richard R replied il y a 9 ans et 2 mois

You have to look harder… http://inmoov.fr/inmoov-stl-parts-viewer/?bodyparts=Forearm-and-Servo-Bed

Mindless a publié une note il y a 9 ans et 3 mois

Hello Mr Gael, Guys and Girls-
I see the guys over at -Myrobotlab- have got the Electric Motor with H-Bridge and PID working to the point where it’s a real alternative method of powering the mechanical movements of Inmoov,,,
So I assume this mean a cheap and nasty servo that is prone to “Burning-Out” can be modified so it keeps its Gear train…En afficher davantage

anthony a publié une note il y a 9 ans et 3 mois

Rachel & Marty, I hope they can understand themself soon 🙂

Humanoid a publié une note il y a 9 ans et 3 mois

I have a question about the finger-tip sensors. I notice that the nervo break-out boards have the same 3 input pins as the servo ones (pos, neg and S). The finger sensors only have 2 wires for each. The circuit diagram looks like the 2 wires go to the positive and S pins only. Is this correct? If so do we ignore the ground pin? Is there anything…En afficher davantage

Marten de Groot replied il y a 9 ans et 3 mois

You need to order two SIP resistor_network they look like this:
http://www.thedigitalshop.net/iccpix/sip-b-10.gif
http://www.electronicshub.org/wp-content/uploads/2014/12/Network-Resistors.jpg
The NervoBoard has the option to solder one at the sensor side.
You need a 8-pin version (with seven resistors).
I only don’t now which value you need to…En afficher davantage
Humanoid replied il y a 9 ans et 3 mois

Hi, Marten.
I understand now where to connect the SIP resistor. I note that there are type A and type B in those resistor networks. Is the one I need the type A? (isolated). I have been asking around but haven’t yet found anyone who knows or who knows which value I need. If you find out can you reply please?
- Marten de Groot replied il y a 9 ans et 2 mois
  
  Hi Humanoid,
  
  Can you measure for me the open value and the closed value from the sensor ?
  If I now these value’s, I can choice a SIP resistor value 🙂
  
  Thanks in advance…
  
  Regards,
  Marten
Humanoid replied il y a 9 ans et 2 mois

HI Marten.
I will probably re-print the finger-tips tomorrow and start again as I’m not happy with them.
I am trying to get the measurements you asked for but the numbers are changing continually – going radically up and down. I have attached the red and black to each wire in the finger and have tried with a couple of fingers where the tip…En afficher davantage

juerg a publié une note il y a 9 ans et 3 mois

A moveable base and a planned escalator for Marvin. Don’t want to drive around with Marvin in scary heights.