Friends – Activity – Marten de Groot

Mindless posted an update 8 years, 11 months ago

Bob Houston replied 8 years, 11 months ago

OK, I’ll bite. What is it?
- juerg replied 8 years, 10 months ago
  
  ? a brand new dual extrusion head with coolers for the object and the extruders? Cooling the upper part of the extruder can prevent clogging – good. Enjoy the pic – once you start printing it won’t look as good as now!
  for ooze free multiple extrusion in a single object have a look at this
  https://www.multec.de/Extruder_1
  - Mats Önnerby replied 8 years, 10 months ago
    
    It’s a dual extruder upgrade for the Vertex K8400 3D printer from Velleman. I can easily identify it, since I have the same printer for almost 2 years now. It works very well for PLA printing. It makes it possible to print different colors, but more importand, different materials. I tried it about a year ago, but at that time I have print quality…[Read more]

Mindless posted an update 8 years, 11 months ago

Inmoov Original version V1- for SketchUp has just been uploaded- I added the all Potentoimeter (see pic) Not the best looking Potentoimeter but clearly shows where they all go,,,and I added few of the main bolts Which are just Shaft with hex/Socket Heads- so I’ve managed to keep him Low-Res as possible- ,,this will be last update on Inmoov u…[Read more]

Bob Houston replied 8 years, 11 months ago

Mindless, I have downloaded your 3D InMoov Man – nice work. Should I be able to move parts around so I can see the internal parts? The drawing loads as a “Read only” file in SketchUp. Or is the drawing just that, a drawing of the assembled parts?
- buildstoys replied 8 years, 11 months ago
  
  Left-click a part (to highlight it in blue), then right-click and choose Hide.
- Mindless replied 8 years, 11 months ago
  
  It a complete 3d model,,, so you hide parts to see inside him- or you make changes to parts then export that part as STL (Need Plugin) and print them out-,,, if your new to 3d modelling it will take a bit of time how to work stuff out,,,- but SketchUp is one of the easiest of the 3d modelling platform-
  The “load as read only” message means its dou…[Read more]
  - Mindless replied 8 years, 11 months ago
    
    Sorry about that,,,,,now where was I,,,
    But you cannot work on the same file in two different widows —,, think of it as a “Master and Slave” set up,, the first time you open Inmoov man is the Master and if you open it again without closing that Inmoov the others will be loaded as slaves (read only),,,, and you cannot modify the slave ver…[Read more]
    - Bruno.Ash replied 8 years, 11 months ago
      
      I’ve just downloaded your 3D model… WAHOU !!!
      Excellent job, it’s very fun to see the bot in 3D.
      Very convenient for mounting and color test.
      Thanks a lot for sharing

Mindless posted an update 8 years, 11 months ago

3d Inmoov Man in SketchUp all orignal STL Files,,,
http://www.thingiverse.com/thing:1995318

William hall replied 8 years, 11 months ago

Downloaded these this morning. Very nice.
- Mindless replied 8 years, 11 months ago
  
  Glad you like him,, had to rush the skull pieces cos I lost the original version , The next version I will release has had hundreds of hours put into him- he might look the same but he’s not,,, all the interior parts and Gearbox’s have had complete re-builds,,,plus some of the exterior parts have joined together for larger prints but not mod…[Read more]

Mindless posted an update 8 years, 11 months ago

Here is my 5pc Chest,,

Hutch replied 8 years, 9 months ago

Looks nice! Have you posted the .stl files someplace?

Mindless posted an update 8 years, 11 months ago

Good question Perry- This is one use of a hundred mods/uses you can do with -3d Inmoov-
This mod allows the servo and gear to be positioned by just loosening and tightening the grub screw- You send the command line to the servo to adjust its position,,—,,then adjust the gear to the position you want,,, and then tighten the screw ,, I wasn’t s…[Read more]

Mindless posted an update 8 years, 11 months ago

-=3D Inmoov in SketchUp is Finished=-
“All Original STL Parts are Used,”- Except for the Fingers and Servo Tray,,,-I will post the file as a single download on Thingiverse tonight sometime-,,,Hope you enjoy

Perry replied 8 years, 11 months ago

I am not sure of the purpose of this but I get the feeling it will be of great use to a lot of people. What should I use this for?
William hall replied 8 years, 11 months ago

That is very cool. Thanks for sharing it!
Wei Xingfeng replied 8 years, 10 months ago

Cool ! SketchUP is very popular and easy to use. By the way, where’s the link to the Sketchup-InMoov?

Mindless posted an update 8 years, 11 months ago

akash dixit posted an update 8 years, 11 months ago

hey my ADHVIK 1.0 (InMoov family )hand is ready now

Wei Xingfeng replied 8 years, 10 months ago

this’s your first printted hand ? Much more better then mine. I use the iron-heating to fit the holes.

anthony posted an update 8 years, 11 months ago

Season’s greetings from Dark Inmoov

Marten de Groot replied 8 years, 11 months ago

HoHo…. HoHo 🙂
- Perry replied 8 years, 11 months ago
  
  Luke, I am your printer
  - juerg replied 8 years, 11 months ago
    
    I want a video of how good he is with his sword – half the christmas tree with a single swipe?
    - anthony replied 8 years, 11 months ago
      
      promise ! lol I will wait the end of the year otherwise it’s my wife half me 🙂

akash dixit posted an update 8 years, 11 months ago

@bretzel59 i am making bisep so HS-805BB This servo is so costly can i use any cheap servo alternate of this if yes then please provide me the link of that

Mindless replied 8 years, 11 months ago

Nope,,,, HS-805BB are the cheapest out there for their size,,, prices are all over the place with servos-,, have a look at quite a few web-shops before buying- you should be paying around $35usd for them- but check out the “postage cost” before buying ,,,
- Perry replied 8 years, 11 months ago
  
  I use the HK15338. They are the same size and cost $15 USD. Available in the US too.
  - Mindless replied 8 years, 11 months ago
    
    That”s a good price,,, they work alright,,?
    - Perry replied 8 years, 11 months ago
      
      Everything is a tradeoff. They are basically clones and can be modified in the same way as the 805’s.
      A little less torque, a little less speed but definitely usable. I have been happy with them.
      - Perry replied 8 years, 11 months ago
        
        https://hobbyking.com/en_us/hobbykingtm-hk15338-giant-digital-servo-mg-25kg-0-21sec-175g.html
Bob Houston replied 8 years, 11 months ago

Try these ones, they are the same as the HS-805’s but only $27 USD.
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXLN94&P=4#technotes
- Mindless replied 8 years, 11 months ago
  
  Cool,,, I’ll get a couple of them for testing,,, at that price i can fry/destroy them without worrying about it,,,, going to use these in the end (see link) ,, providing i don’t find a problem with them- there a Australian clone of the Savox ,,,, but beefed up,,, not down,,,, bit pricey ,,, but the torque is good, and got the 7.2v option too…[Read more]
juerg replied 8 years, 11 months ago

for the large servos I strongly recommend using heat-up fuses so it stops the current before burning up the servo. I anyway had expected that these servos would come with overload protection but the manufacturers seem to like them burning out …

akash dixit posted an update 8 years, 11 months ago

i am making bisep so HS-805BB This servo is so costly can i use any cheap servo alternate of this if yes then please provide me the link of that

akash dixit posted an update 8 years, 11 months ago

i am making bisep so HS-805BB This servo is so costly can i use any cheap servo alternate of this if yes then please provide me the link of that

Mindless posted an update 8 years, 11 months ago

About a week to go and i should have this version finished off,,, This version is for the building process,,, so i have put him together using a lot of Mr Gael original parts,, using SketchUp as the 3d software so anyone should be able to pull him apart and see how he works and it will help with the building process a lot,,, this was a way…[Read more]

Mindless posted an update 8 years, 11 months ago

juerg replied 8 years, 11 months ago

ehhh, nice perspective. looks like a lot of work to position the many parts at the right location and orientation

Mindless posted an update 8 years, 11 months ago

Back Covers are Done,,,

Mindless posted an update 8 years, 12 months ago

Hi Guy&Girls- Mr Gael
Yep,,, Done in SketchUp-, Should have the original version of him finished in a few of days-, There will be a couple of versions of him,,, the first version will be the one using 90% Mr Gael original parts so this will be very useful for the building process,,,,,, you learn a lot more about Inmoov having a 3d model of him to…[Read more]

Marten de Groot replied 8 years, 12 months ago

Great and Nice work MindLess.
Thanks for sharing your experience with all InMoovers 🙂

Regards,
Marten

Mindless posted an update 8 years, 12 months ago

amby replied 8 years, 12 months ago

very nice
Michael Hayward replied 8 years, 12 months ago

WOW this and the previous post are GREAT, what software are you using?
- Jeremy replied 8 years, 12 months ago
  
  i think its in sketchup

Mindless posted an update 8 years, 12 months ago

amby replied 8 years, 12 months ago

very nice

Mindless posted an update 9 years ago

Just Uploaded a Modded version of the Finger Starter Kit Main Base-
http://www.thingiverse.com/thing:1947095
Its a pretty Simple Mod but very handy for R&D on Tendon Experimenting,,,,

akash dixit posted an update 9 years ago

can i got the python script of inmoov right hand and forarm voice controll ?

Mindless posted an update 9 years ago

Just Uploaded the Modded Elbow Joint to Thingiverse- (two types)
Servo Tray and Tension bed will be online in a couple of hours- just panel beating work on the servo tray and tension bed- prints clean and joins together in one piece not two– extra screw/bolt holes- and there is a 2piece version too..

akash dixit posted an update 9 years ago

i am making inmoov right hand so can i get the Tensioner.stl file for it please i am not getting it anywhere can you please provide me the link of it

Richard R replied 9 years ago

You have to look harder… http://inmoov.fr/inmoov-stl-parts-viewer/?bodyparts=Forearm-and-Servo-Bed

Mindless posted an update 9 years ago

Hello Mr Gael, Guys and Girls-
I see the guys over at -Myrobotlab- have got the Electric Motor with H-Bridge and PID working to the point where it’s a real alternative method of powering the mechanical movements of Inmoov,,,
So I assume this mean a cheap and nasty servo that is prone to “Burning-Out” can be modified so it keeps its Gear train…[Read more]

anthony posted an update 9 years ago

Rachel & Marty, I hope they can understand themself soon 🙂

Humanoid posted an update 9 years ago

I have a question about the finger-tip sensors. I notice that the nervo break-out boards have the same 3 input pins as the servo ones (pos, neg and S). The finger sensors only have 2 wires for each. The circuit diagram looks like the 2 wires go to the positive and S pins only. Is this correct? If so do we ignore the ground pin? Is there anything…[Read more]

Marten de Groot replied 9 years ago

You need to order two SIP resistor_network they look like this:
http://www.thedigitalshop.net/iccpix/sip-b-10.gif
http://www.electronicshub.org/wp-content/uploads/2014/12/Network-Resistors.jpg
The NervoBoard has the option to solder one at the sensor side.
You need a 8-pin version (with seven resistors).
I only don’t now which value you need to…[Read more]
Humanoid replied 9 years ago

Hi, Marten.
I understand now where to connect the SIP resistor. I note that there are type A and type B in those resistor networks. Is the one I need the type A? (isolated). I have been asking around but haven’t yet found anyone who knows or who knows which value I need. If you find out can you reply please?
- Marten de Groot replied 9 years ago
  
  Hi Humanoid,
  
  Can you measure for me the open value and the closed value from the sensor ?
  If I now these value’s, I can choice a SIP resistor value 🙂
  
  Thanks in advance…
  
  Regards,
  Marten
Humanoid replied 9 years ago

HI Marten.
I will probably re-print the finger-tips tomorrow and start again as I’m not happy with them.
I am trying to get the measurements you asked for but the numbers are changing continually – going radically up and down. I have attached the red and black to each wire in the finger and have tried with a couple of fingers where the tip…[Read more]

juerg posted an update 9 years ago

A moveable base and a planned escalator for Marvin. Don’t want to drive around with Marvin in scary heights.