Looks really good. Nice eye treatment

woww so great!! can i konw where u found chest covers ? i really can’ t find theme 🙁

Great looking, nice choice of colors!

are you using vocaloid for the voice

PS: removal of the slurry ABS on the glass after print is done, simply run under cold water tab and it will detach itself like magic. Dry the glass plate and you are ready to go again.

Hi Gael – great info thank you.what is the consistency of the ABS slurry you use. your prints are look great.

Hi Gael
I still think you should give HT-PLA a try and use a print plate that will not need any slurry or tape and allows to remove items by just picking them up from the cooled out print bed!

i am making inmoov right hand so can i get the Tensioner.stl file for it please i am not getting it anywhere can you please provide me the link of it

wouaaa it is hotttt lol
amazing

Uhh, Uhh, my printer manufacturer had changed his print bed product line to make it almost impossible to overheat it (you could fiddle with the control SW however).
I assume some workshops could run into serious problems having the printbed burning through.
Think about switching to PLA-HT (or HT-PLA) which is as good as ABS but prints on a 50…[Read more]

no idea, what is this good for?

This is awesome! The 2 topmouth pieces have always been kind of a pain to work with, so that will help alot.

Ahhh, great, I had started to add flabs n stuff to keep them from falling apart.

Very good progress Amby with your robot! Is the wheel platform large enough to keep the robot in balance when you drive it around?

hello gael thank you yes the wheels plateform is enough for balance
all is ok with my prototype cardboard so now i start to build in wood

Nice idea with the rechargeable batteries. What kind of motors are you using?

Very nice Amby!
It seems to have good speed with those electric car motors.
I really like your battery idea,! If I wouldn’t fly the globe with my InMoov robot, I would go for your solution!
Unfortunately we may not carry batteries like that in planes. The very common 6VAh batteries can be bought almost in every country, so when I arrive in a…[Read more]

Fantastic Amby, Whaoo two motors and two batteries !, you are ready for the InMoov Racing 🙂

Thanks Gael, now I see how it all works. I like how you can detach the drive wheel to push it around manually. See my comments on Sebastiens’s post.

@Bob, to answer your previous questions on Sebastien’s post:
The base can carry InMoov easily. You can add at least 10kg and the base can still ride fine as long as the floor is flat.
When I use InMoov in the street, the wheels can overcome some holes if it rides full speed. If you look at my video, you can see a battery carrier between the two…[Read more]

I like your drive system. Can you share some details about the components you used to build it – motors, servos?

i like your choice color in your inmoov!!!

Awesome, now we can go racing!!
Thanks for all the links. I am still using a huge Transmitter gracefully given by Alessandro during the Paris Makerfaire, but I really want to build something much smaller which could transmit directly to the receiver.
Having two functionality for the mobile plateform is super handy when you travel with…[Read more]

Nice work! It is amazing what you do with cardboard ! Can you share some information about the motors you used?

Amby the King of Cardboard!
As I commented on your post on MyRobotLab, you could make Thingy on Thingiverse with the DXF and all informations of the motors, wheels and sources. Some builders could reproduce it in PVC or plexiglas.

It is nice to see young people working on things like this.

Ehi!!!
There is something of a Déjà Vu.
Using a golf caddie is a very good option!
Is it sturdy enough? I am pretty sure your motors will do the job, InMoov is a light fellow!

Nice looking base. How does it work? Do you have a video of it moving around?

Thank you very much, was waiting for him, it was what I needed.

thank you gael

Thanks very much Gael!

Awesome Gael and thanks for the files and the tutorial.

OOOhhhh Yes,

This is very good news Gael 🙂
I will soon start printing the head, so your update is just on time 😉

This week I will receive my new _XT filament from ColorFabb.
I hope it’s a good filament to use for most InMoov parts, even for the shoulder mechanical parts.

Other question about the camera, are you still happy with your…[Read more]

very well finished and alot gone into the finish of the parts by the looks of it. i like the led lighting effects. how did you achieve that, especially the eyes ?

Wow. That’s a high quality build. You must have spent a lot of time to make the parts look so good 🙂

hi rentaprinta how did you mount the neo pixel in the head and where ?

Nice video Boris! InMoov lights up for Christmas time!!
it’s nice when InMoov starts to talk through program isn’t it?
I heard you had to use keyboard typing during the Berlin Makerfaire instead of voice recognition, in fact I met Bodo Facklam in Roma.

looks good! i’m printing them to put on kim

The new version has bigger letters indeed and filet around the edge.

So you impress us with a shiny underarm part! I assume this is the result from some additional treatment and not the output of your ultimaker?

Hello Jörg,

its a product of the ultimaker, but after printing i do a lot of polish and varnish:

Here is a manual how i do this:

https://groups.google.com/forum/#!searchin/inmoov/pla/inmoov/a6z8a43DRmA/09L5B8eDtvoJ

Cool and sure, MRL deserved it to get placed at the shoulders from InMoov.

@ Bob Houston,

This looks awesome dude, great work and a cool upgrade to the InMoov !

I can’t wait to see some more video’s with the Eye tracking options 🙂

bonjour tout le monde!
est ce que bob Houston pourrait faire partager a la communauté inmoov les plans et les fichiers stl de son châssis et la colonne sur roue qu’on voit sur la vidéo youtube?
merci d’avance

Sorry for posting so fast Just got excited when I saw the pictures from your trip you posted, when do you think you will release them?

That is a really nice back. Looks good and will protect all the electronics and hide some of the servos.