PS: removal of the slurry ABS on the glass after print is done, simply run under cold water tab and it will detach itself like magic. Dry the glass plate and you are ready to go again.

Hi Gael – great info thank you.what is the consistency of the ABS slurry you use. your prints are look great.

Hi Gael
I still think you should give HT-PLA a try and use a print plate that will not need any slurry or tape and allows to remove items by just picking them up from the cooled out print bed!

i am making inmoov right hand so can i get the Tensioner.stl file for it please i am not getting it anywhere can you please provide me the link of it

wouaaa it is hotttt lol
amazing

Uhh, Uhh, my printer manufacturer had changed his print bed product line to make it almost impossible to overheat it (you could fiddle with the control SW however).
I assume some workshops could run into serious problems having the printbed burning through.
Think about switching to PLA-HT (or HT-PLA) which is as good as ABS but prints on a 50…[Read more]

This is awesome! The 2 topmouth pieces have always been kind of a pain to work with, so that will help alot.

Ahhh, great, I had started to add flabs n stuff to keep them from falling apart.

Thanks Gael, now I see how it all works. I like how you can detach the drive wheel to push it around manually. See my comments on Sebastiens’s post.

@Bob, to answer your previous questions on Sebastien’s post:
The base can carry InMoov easily. You can add at least 10kg and the base can still ride fine as long as the floor is flat.
When I use InMoov in the street, the wheels can overcome some holes if it rides full speed. If you look at my video, you can see a battery carrier between the two…[Read more]

Hello Richard,
There isn’t much info on that, most information you will find are directly on the Thingiverse. I haven’t seen many hands printed with the extra DOF for the thumb.
http://www.thingiverse.com/thing:28124
Hopefully, somebody will come here to help you on that here.

It is nice to see young people working on things like this.

Thank you very much, was waiting for him, it was what I needed.

thank you gael

Thanks very much Gael!

Awesome Gael and thanks for the files and the tutorial.

OOOhhhh Yes,

This is very good news Gael 🙂
I will soon start printing the head, so your update is just on time 😉

This week I will receive my new _XT filament from ColorFabb.
I hope it’s a good filament to use for most InMoov parts, even for the shoulder mechanical parts.

Other question about the camera, are you still happy with your…[Read more]

Hi Richard,
Nervo boards have been shipped with a delay because I didn’t have anymore XT60 connectors. The shop had a malfunction which should be fixed (Thanks to Sebastien) because it changes from “backorder” to “in stock” everytime somebody would purchase a Nervo board and vice versa.
But rest assured that it’s on the way to your address.

Hi Richard! You have to buy 2 Nervo Boards, one or the right side and one for the left side. You would have free outputs in one of the Nervo Boards (because the InMoov for example only have one head) so you can use them in the future to add new moving parts to the InMoov.
You don’t have to adapt the Nervo Boards, are the same.
Bye!

Cool and sure, MRL deserved it to get placed at the shoulders from InMoov.

@ Bob Houston,

This looks awesome dude, great work and a cool upgrade to the InMoov !

I can’t wait to see some more video’s with the Eye tracking options 🙂

bonjour tout le monde!
est ce que bob Houston pourrait faire partager a la communauté inmoov les plans et les fichiers stl de son châssis et la colonne sur roue qu’on voit sur la vidéo youtube?
merci d’avance

Sorry for posting so fast Just got excited when I saw the pictures from your trip you posted, when do you think you will release them?

That is a really nice back. Looks good and will protect all the electronics and hide some of the servos.

There is a button above the map “Locate your InMoov”.
Then it will load the map (you need to have an Google account), or watch this tuto video:

Really cool!

I hope and i pray that our Inmoov will get legs!!!

Inmoov looks like something from Outer Limits.

Many will need to print, but the robot will go 🙂

Sooner or later, someone will make…

Have you already tried this ? If so, what kind of spring do you use, and where to buy it ? 🙂 (ok, I’m lazy 😉 )

I’m not really into site programming but when you go to activity the bar on the right is not needed any more. if this is removed you might have more room for the videos.

for the comments, Im looking almost every day to see what others are making.
the comments are sometimes low but I think lots of people are watching.

I also found it a bit difficult to navigate the site. I just kept punching around until it functions as it should.
I would also agree with dumping the update stream on the right side but leave the members activity button.

I have found that by using “copy and paste” into the text box is the easiest way to post You Tube videos. It is unfortunate that they are cut in half but by clicking on the name of who posted it, it takes you to the video. I too think that a lot of people look at the site but everyone leaves comments. I know I don’t comment on everything but I…[Read more]

Hello! And thanks for welcoming me. I started my inmoov approximate 2 month ago

yeee