Sign in to our website and become an InMoov member. It will allow you to post message, pictures, and share with others InMoov builders. It's just one click away!
Identifiant ou adresse e-mail
Mot de passe
Se souvenir de moi
anthony a publié une note il y a 9 ans et 8 mois
Hi ! This a poc of NeopixelRing control from MRL. I think there is a better solution but it works for me. And I don’t know how to make a service. Ino come with some samples.
What I do : – Connect NeoPixel to Arduino Nano – Flash it with : https://github.com/MyRobotLab/pyrobotlab/blob/master/home/moz4r/Neopixel_MRL.ino – Connect Nano to computer…En afficher davantage
anthony a publié une note il y a 9 ans et 9 mois
Gael Langevin a publié une note il y a 9 ans et 10 mois
Printing another InMoov, because the original is going to stay home. It is a precious robot now! Having a second printer makes it fast, specially because I updated the firmware to Sailfish on the CTC printer. I used to print on Kapton with the ABS but finally got to print directly on glass which is giving a super result and surprisingly absolutely…En afficher davantage
PS: removal of the slurry ABS on the glass after print is done, simply run under cold water tab and it will detach itself like magic. Dry the glass plate and you are ready to go again.
Hi Gael – great info thank you.what is the consistency of the ABS slurry you use. your prints are look great.
The slurry is almost totaly liquid. It’s hard to say how much percent of ABS and acetone. Maybe 20 to 30 percent of ABS for 100 acetone.
Hi Gael I still think you should give HT-PLA a try and use a print plate that will not need any slurry or tape and allows to remove items by just picking them up from the cooled out print bed!
i am making inmoov right hand so can i get the Tensioner.stl file for it please i am not getting it anywhere can you please provide me the link of it
The tensioner is with the servobed in the galery…
InMoov body parts library :
Gael Langevin a publié une note il y a 9 ans et 11 mois
My printer is out of work for a moment… Gee what a smell, if you ever get your heated bed that burns out, you need to ventilate your workspace!! It took me a while to find a heated bed this size in Europe . 300x200mm. I finally ordered the PCB in Danemark.
wouaaa it is hotttt lol amazing
Oh yeah and it smells really bad in my workshop…
i can t think it is possible and so so dangerous
Uhh, Uhh, my printer manufacturer had changed his print bed product line to make it almost impossible to overheat it (you could fiddle with the control SW however). I assume some workshops could run into serious problems having the printbed burning through. Think about switching to PLA-HT (or HT-PLA) which is as good as ABS but prints on a 50…En afficher davantage
@Geal I guess it’s beause your heating bed’s temperature sensor have loose from your heating bed!! I suggest you check complete all your 3D printer’s switch, sensors to prevent this happen again…
anthony a publié une note il y a 9 ans et 11 mois
Hi ! this is electronic i…En afficher davantage
Great! One suggestion though, InMoov is much slower with 5V than with 6V. I think you would really benefit of more speed with two DC-DC converters from your 12V to 6V. Are you using the Raspi2 for post processing or did you a system on it with MRL on it? My tests were too slow for video fps with the Raspi2. Couldn’t do good Face tracking. But it…En afficher davantage
Hi ! yes my DC convert to 6V it’s ok . All the system is Embedded on Raspi2 I agree some fonctions are slow ( analog poling ) . PI3 , It’s maybe a good news for us I will test it :…En afficher davantage
Because it is also been a very long time that I wanted to inverse the InMoov logo on the hand, this has been the occasion to clean up those parts. Check now for the version V6 of the…En afficher davantage
Hey I just fused under Blender my recent modified TopMouth and LowBack. Rotated at 45° on the Z axe and they actually still fit in the correct 12cm3 build area !!
So now TopMouth and LowBack are permanently fused on the InMoov website. and can be screwed instead of being glued. Make sure to get the V3 version on InMoov.fr. I didn’t update my…En afficher davantage
This is awesome! The 2 topmouth pieces have always been kind of a pain to work with, so that will help alot.
Yes indeed, I also did a reprint with fused topmouth after coming back from India, the head had been damaged in the suitcase during flight travel. It is much easier to assemble now.
Well it took me a while but it is done!
New builders will have a lot more fun to assemble the skull now. I have set screw and bolts holders in various parts to make the last fit much easier. You can use 3mm screws and bolts to attach the parts together. I modified: -TopMouth -SideHear -LowBack
Ahhh, great, I had started to add flabs n stuff to keep them from falling apart.
Gael Langevin a publié une note il y a 10 ans et 1 mois
Small video to explanation the driving system of my plateform and the locking mecanism for to be able to push InMoov by hand while driving direction with the remote. I\’m in the process to make a very small remote transmitter which could be held within the palm.
Thanks Gael, now I see how it all works. I like how you can detach the drive wheel to push it around manually. See my comments on Sebastiens’s post.
@Bob, to answer your previous questions on Sebastien’s post: The base can carry InMoov easily. You can add at least 10kg and the base can still ride fine as long as the floor is flat. When I use InMoov in the street, the wheels can overcome some holes if it rides full speed. If you look at my video, you can see a battery carrier between the two…En afficher davantage
Sebastien a publié une note il y a 10 ans et 1 mois
Airwin InMoov driven with a wireless PS2 gamepad
I like your drive system. Can you share some details about the components you used to build it – motors, servos?
Thank you Bob, this InMoov plateform is widely inspired from the one Gael made. My components are coming from old broken stuff to make it low cost as it is a temporary solution waiting for legs :-).
The arduino uno that manage the inmoov neopixel ring is now also used to read commands coming from a wireless PS2 Gamepad ( thanks to Bill Porter…En afficher davantage
i like your choice color in your inmoov!!!
Thank You 🙂
Awesome, now we can go racing!! Thanks for all the links. I am still using a huge Transmitter gracefully given by Alessandro during the Paris Makerfaire, but I really want to build something much smaller which could transmit directly to the receiver. Having two functionality for the mobile plateform is super handy when you travel with…En afficher davantage
Sebastien and Gael, Thanks for sharing the details on your bases. They are very simple and efficient. How much weight can the base carry/move around. Gael, yes, EZ Robot can do the voice controls as well. I can run my drive motors with Voice command, or manually on the computer or mobile app. I’m looking at building a lighter base like this but…En afficher davantage
@Bob, I replied to your questions on the thread in which I posted the video with the base.
Using MyRobotLab and creating a special control GUI with sliders. This might be using MaVo\’s GestureCreator in the background.
Students at IES Vegas assembling the eye mecanism on InMoov\’s face.
It is nice to see young people working on things like this.
Sebastien a publié une note il y a 10 ans et 2 mois
Hello, Just to share with you the very first wheel spin of Airwin this night. I hope the small motor coming from an old electric Kids Toy will not soon burn.
Ehi!!! There is something of a Déjà Vu. Using a golf caddie is a very good option! Is it sturdy enough? I am pretty sure your motors will do the job, InMoov is a light fellow!
Gaël, yes it’s widely inspired from what you do 🙂 . (i first write Wildly Inspired 🙂 Sure « light is right » This Golf caddie is in aluminium so it is really sturdy, don’t know how many clubs it can support but one InMoov seems ok.
Hey cool! We should make a new link in the « Build Yours » for the 3D printed wheel system. I have almost all the parts designed and ready to upload.
Looks great nice work!
Thank you.
Oh yes, wonderfull a full 3D printed wheel !!! better than looking for old golf caddie :-).
Nice looking base. How does it work? Do you have a video of it moving around?
Hi Bob, i just post a small video
Gael Langevin a publié une note il y a 10 ans et 2 mois
Waaaoooo release of the MidStomach parts!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
It’s been asked so many times, that even though you will have to re-print all these parts when the legs will be released, that I decided to upload those parts anyway. I also made a pretty good tutorial with it, so CHEER UP, and get your printers warmed u…En afficher davantage
Thank you very much, was waiting for him, it was what I needed.
thank you gael
Thanks very much Gael!
anthony a publié une note il y a 10 ans et 2 mois
Just received blue ribbon cable. Because Inmoov Numéro6 want to be pretty
Woooiii, pretty InMoov to be coming! A blue clone?
Just a little, can’t chose pink my wife is jealous
If you are looking for a new job for your InMoov, check this: https://youtu.be/LZQdWd_vdoM?t=1m37s 😉
Ahaha! the blue note! It’s going to make your wife even more jealous!
Hi everyone! I uploaded all parts for the new eye mecanism inspired by Mats Onnerby and Bob Houston. The mecanism is more sturdy and gives wider degrees of rotation for the eyes. I created files that are simple to print with no support besides for EyeSupport and they require no modifications of EyeGlass (Face). Also I managed to use the same…En afficher davantage
Awesome Gael and thanks for the files and the tutorial.
Thank you Gaël , i cant wait to start the head !
Gael Langevin a publié une note il y a 10 ans et 3 mois
Last night InMoov had something of a Picasso painting… Modifying the eye mecanism to adapt a mix of Mat and Bob to be able to use my previous face design along with the Hercules camera and the DS929HV servos.
OOOhhhh Yes,
This is very good news Gael 🙂 I will soon start printing the head, so your update is just on time 😉
This week I will receive my new _XT filament from ColorFabb. I hope it’s a good filament to use for most InMoov parts, even for the shoulder mechanical parts.
Other question about the camera, are you still happy with your…En afficher davantage
Well the hercules HD does a good job as far as what I do with it. But as I said it would be ideal to have a board for post processing things like tracking, face tracking, object color detections to let the computer do other tasks. The Pixy camera would be great but it is mounted on such a big board…
I will wait for this camera: https://openmv.io/ Leon has ordered them via kickstarter 🙂 This has the same results and is smaller ! I hope the price is the same like the Pixy cam.
The Pixy already used a 4-layer PCB, so it would be a hard work to make this smaller 🙂 Option is to ask for a sort camera-shield mount option.
I use the raspberry PI camera in one of the eyes of the modified head. It’s much better quality than a USB 2.0 camera. And the intention is to use the Rpi to do image processing. You can even find a really small version of the camera. https://www.pi-supply.com/product/adafruit-spy-camera-raspberry-pi/
@Marten, As you mention in private message the OpenMV could be a nice option because it is python based and Open source which could be easily added to MyRobotlab with no need to use an extra Rpi. @Mats, I personnaly would rather a smaller device than having to use a Rpi for the image processing, because with the tests I did using the Rpi the fps…En afficher davantage
anthony a publié une note il y a 10 ans et 3 mois
Happy HALoween !
WOOOO!!!!!!!!!!!!!!!!!!!!
Tip i used to print special parts without support like this . Epoxy glue and hotted metal nail inside
Still printing, but all looks good to me: https://copy.com/7NkaxvRHL1W64ZKo
great Marten ! i will try reduce print speed with 100% infill . 226° is not too hot ?? I use simplify3d no Wall Thickness settings just perimeter shell .
Hello Anthony,
226° is a high temp, the UM2 has a lower temp as the display is showing. And with this temp I get good results 🙂 Sometimes I set the temp a bit lower, after the first 10 layers.
Do you have a picture from your end results ? If yes, it good be handy to give a better advice where it go’s wrong.
I checked the K8400 and see there…En afficher davantage
ok I start at bigger temp too it better to attach bed . This is it : ( the middle is already glued ) : http://lerendezvousdelaterre.com/tmp/piston_cut.jpg .
Looks good Anthony, I think only you need to start the fans from a higher layer ! I see a lot of warping at the bottom side, this happens when the PLA is cooling down to fast. The best way is to start slowly with the fan speed around layer 30 (3mm if you are using 0.1mm layer)
Also check that the print bed is close to the nozzle. If the distance is to far, the first layer will not stick well to the bed. The first layer should create a solid piece of plastic without gaps.
i also printed all the gears and pistons in carbon fiber/abs, very strong and light and durable.
It is interesting to see how 3D printers have improved in 3 years. When I started the project, most printers could only print with raft which would have been a pain when assembling together those two piston parts. Today with heated bed and good sticking surface it becomes easy to print parts in different directions. Also support printing is so…En afficher davantage
Yeh u r right, i remember it’s like old paper printers 🙂
I need to improve cooling, sorry the fishes for the hack i try something : air-pump flow ( i need better pump, flow is not strong enough ) : http://lerendezvousdelaterre.com/tmp/aqua.jpg
Yeh I remember it’s like paper printers ! This is support killer : I dont need glue anymore but 6 hours … 🙂 Print is perfect 80% infill inside http://lerendezvousdelaterre.com/tmp/support-killer.jpg
Marten de Groot a publié une note il y a 10 ans et 3 mois
So, finally my UM2 Fan upgrade is done. Hopefully it gives me now a better « HangOver » result 🙂 http://www.thingiverse.com/thing:1078510 Next week I will go further with the servo pully’s including the springs. The spring will be used, to function like a servo_saver and at the same time to stretch the braided fishing line.…En afficher davantage
Woooii cool
Hi robots it’s for your own good ! Intensity sensors . The problem is if we want monitor all the servo , there is lot of wires…
I hope this will give the option to monitor each finger. As you can see, the value isn’t straight (it’s now a pulsed signal) because of the 50HZ servo position update/feedback timing. I think we need something like a RC (Resistor/Capacitor) network, to filter the 50HZ to a constant…En afficher davantage
Hi ! I try to play with vref and gain potentiometer it’s better . Tks I will check your link . If we cant maybe we can do average about min / max / time pulsed signal
Sebastien a publié une note il y a 10 ans et 3 mois
Yeah, MyRobotLab the InMoov brain sowtware is also on the Shoulders covers, pretty nice tatoo 🙂
looks good! i’m printing them to put on kim
Thanks, You are going to print the new release with bigger letters. Please send a picture of Kim with his shoulder cover 🙂 I called my InMoov Airwin
Yes the bigger letters make it easier to see them!
The new version has bigger letters indeed and filet around the edge.
I just modified the CableHolderWristV4 to V5.
It is now screwed with the servo instead of being glued to the servo.
InMoov
I’m wondering how Gareth, or anyone else, would proceed to use the below Blender file along with virtual InMoov to create simili human gestures.
The c3d addon for Blender is in the preferences to be added.
http://inmoov.fr/wp-content/uploads/2015/10/walking_slow03.c3d
If we could these kind of files along with the riggs of virtual InMoov, it…En afficher davantage
Marten de Groot a publié une note il y a 10 ans et 4 mois
Here some pictures from the new ServoBed: I’ve replaced two servo’s more to centre, to get some more hight. I’m almost finished with the last RotaWrist parts. When these are ready, I need to check the RobCableFront part. I need to (re)move some holes in this part.
Last night and today I’ve printed all the RobParts. Now I’m printing a new ServoBed and tomorrow I will start with all RotaWrist parts. When that’s ready, the complete ForArm and Hand are ready for use 🙂
Gael Langevin a publié une note il y a 10 ans et 4 mois
Feeling like showing your InMoov is powered by MyRobotLab ? These little covers go on each shoulder.
Cool and sure, MRL deserved it to get placed at the shoulders from InMoov.
Servo Pulley can now be downloaded: http://www.thingiverse.com/thing:1052776 I will upload more sizes later these day\’s.
Awesome! I have added it in collection of derivatives.
Thanks Gael !
Last day of Makerfaire Berlin for Tonerwerk with his very nice InMoov. Check the pictures he posted on the forum: https://groups.google.com/forum/#!topic/inmoov/vyEVQvZ0cjU%5B1-25%5D
So, during some spare time this day’s, I’ve printed a complete Right hand. All in PLA and everything fits well 🙂 My next step is to start with the Right underarm parts, so I can install all servo’s and connect these to all the Fingers.
Here some pictures from the complete Right hand:
Woouuiii ! Nice prints! Well now the forarm and you just about ready to have a Right hand!
Haha, I can’t wait… I’m printing the last day’s at Day and Night… 🙂 I hope the forearm is ready in about two day’s.
Next day’s I will check all the lengths which each finger needs to lift them completely with the new servo pulley. So I can start re-designing the pulley for each finger.
Bob Houston is having problems posting on the community activity, therefor he requested I would do it for him. If you also encounter problems which don’t allow you to post pictures or videos, let us know on the forum, we will try to figure the problem. Bob has remixed a new eye mechanism which is pretty cool! It is…En afficher davantage
@ Bob Houston,
This looks awesome dude, great work and a cool upgrade to the InMoov !
I can’t wait to see some more video’s with the Eye tracking options 🙂
just WAHOOOO
Good idea, Gael, about an adjustment to prevent cross eyes. I have designed a new part that will allow for that adjustment. I have added it to the STL’s on Thingiverse.
Ah perfect! Hey but you can add comments? So it works now for you the community?
Hmmm, that’s strange that it shows up here but I can’t see my comment on the main Community page
bonjour tout le monde! est ce que bob Houston pourrait faire partager a la communauté inmoov les plans et les fichiers stl de son châssis et la colonne sur roue qu’on voit sur la vidéo youtube? merci d’avance
For the complete Right hand, the Thump is ready:
Here a video again, with the new servo pulley which is specially designed for a Finger movement. It’s designed for servo’s which can turn a full 180 degrees. This Pulley gives a better torque and there’s less change to move to much to destroy the servo or finger. There are two option about the spring (in this video I’m using a elastic cord…En afficher davantage
Nice! So the white is the elastic cord and it runs all the way to the end of the finger, if I juge the white spot at finger tip. What kind of elastic cord? Don’t you think it will stretch more and more over time? I also can see the asymetric effect on the black braided line.
Hi Gael and thanks for your comment and time 🙂
The elastic cord is a basic peace which you normally will use for clothes. It’s now just to do the job of the spring. I’ve ordered some springs and have to wait they will be here.
I hope the asymmetric effect is in a positive way 🙂 At the end of the finger position, the servo can give more…En afficher davantage
Here some better pictures the new servo Finger pully together:
Interesting design! I like the idea to set the servo horn within the pulley. They might be a bit too thick to fit under arm covers though… Let us know.
Thanks Gael,
And good to now about the limited thickness. I will check this when all underarm parts are done. There is a easy way to save some hight if needed, I can include some holes for the two screws.
Hi Gael,
Just checked the hight and it fits fine.
I’ve made a other servo pully. I hope to get soon the springs because they are needed in this design. Here two pictures from a mounted pully at a servo and a picture with some views from the drawing:
Hi Marten I think before changing the pullies we should agree what the mechanical requirements are for the fingers. In my arms I use mg996R and they can turn about 110 deg to the left and to the right (total 220). So when Gael says he can move all fingers with the exception of the middle one with an unmodified HK15298 servo which allows only 45…En afficher davantage
Hi Juerg,
Thanks for your input about this.
The good thing to use a 180 degrees pully, is that there is less change to break any mechanical parts. A other good thing is, there is a higher resolution to place/hold the finger at his position. Have you seen my Finger Starter video ? Here I’m using a MG996R servo and it turns a full 180 degrees…En afficher davantage
Agree that individual pulley’s for your combination of servo and finger would be safest for builders. Just go 0 to 180 without having to worry about limits. I am rather the software guy and think – once the mechanical part looks good – I can control movements with the mapping function of MRL. For me the springs are rather an option to add a bit…En afficher davantage
Dreaming is a good part of your life 🙂
Sounds interesting about the linear resistor position feedback and the camera / google image recognition. I hope to see more if you have done some tests 😉
About the servo pully sizes, the size is based like the http://inmoov.fr/wp-content/uploads/stl/Forearm-and-Servo-Bed/servo-pulleyX5.stl They will…En afficher davantage
just started to print the ServoBed Part. I’ve edited the drawing to make it more 3D printer compatible 🙂 By some servo mount places it wasn’t the best way to print. Here the new drawing:
Hi Marten, Nice work! Did you post it on Thingiverse? There is other derivatives there: http://www.thingiverse.com/thing:1036300 http://www.thingiverse.com/thing:618449
Not yet, I first like to now if everything will fit well together. If yes, I will place it on Thingiverse.
I’ve seen the two other designs, but all have the same thing by some servo mount places.
Hello guys, Here are some more pictures of the new back for InMoov. It integrates a ThinkPad Tablet 8″ which can be replaced with other tablets fitting the same width size specs. A clip on, printed mechanism, makes it easy to insert or remove. Access to the two Arduino Mega and the Nervo Boards is easy once the tablet is removed. Access to the…En afficher davantage
Sorry for posting so fast Just got excited when I saw the pictures from your trip you posted, when do you think you will release them?
I got totally excited myself when finally I could mount them on my InMoov. Yes I will release them. A few little things to modify, specially where the clavi potentiometer rotates, and also the battery holder needs to go a little lower to let access to the power cable of the Tablet.
That is a really nice back. Looks good and will protect all the electronics and hide some of the servos.
Thanks Mats
So here a simple test video from the FingerStarterKit: (At this moment, I only use the default servo pulley which is included by the servo)
Here the Arduino code, which has a servo slow function included:
#include
Servo myservo; // create servo object to control a servo
int potpin = 0; // analog pin used to connect the potentiometer int val; // variable to read the value from the analog pin int Pos;
void setup() { myservo.attach(9); // attaches the servo on pin 9…En afficher davantage
Here a direct link to download the the code: https://copy.com/oAbFa2h1JoIPBVc7
Hi Marten, I always like to see videos, they tell so much more than words! That carbon filament is great looking! I did make a Arduino script when I was testing the carbone foam sensors on the finger starter. I’m wondering if I still can find it in all my data. It could maybe help you or others, as I recall it was a bit of a different approach.
Found the script back in my data base:
const int servoPin = 3; const int sensorPin = A0; int sensorReading;
int pos = 0; // variable to store the servo position
Servo myservo;
void setup(){ Serial.begin(57600); myservo.write(0); // Open finger. pos = 0; myservo.attach(servoPin ); }
void loop(){ sensorReading =…En afficher davantage
Hi Gaël,
Thanks for sharing your code to.
The best way to use this sort sensor, is to include a servo slow (step-based movement) which I have included in my code. The code what I’ve shared isn’t the code what we need right now. It was just to test the reaction from the sensor as I showed you in Eindhoven.
If we use a step-based movement, the…En afficher davantage
anthony uploaded a new picture: reduced gear il y a 10 ans et 4 mois
I reduce little gear cause servo mount rubber : Dont know if its usefull or not
http://www.thingiverse.com/thing:1024435
Rubber mounts, rubber mounts… I have so many of them in a little plastic bag by now! Let us know if your InMoov is less noisy than mine (I don’t know how we could measure that in decibel) , vibrations make noise in the robot structures.
anthony uploaded a new picture: Arm – The beginning… il y a 10 ans et 4 mois
Awesome time, isn’t it? I loved lego when I was a kid, I can imagine how cool it must be to download the parts, print them, then assemble them. And of course see it moving because of programming! Are you using MyRobotLab?
It’s just pure fun and exhilarating dude long time ago i was not so happy to make soming like this ! I m not using MyRobotLab for now . Only low level servo command. I have just an incomplete hand for now. But when inmoov finish i start MyRobotLab and hope give a soul to inmoov 🙂
Perfect, I see you got the Nervo Board on your picure, thats why I was assuming you might be using MyRobotLab.
anthony uploaded a new picture: PLA Gears il y a 10 ans et 4 mois
PLA Gears : 1 shell 0.1 layer 0.35 nozzle 0.83 flow 180/185° nozzle retract distance : 3,60
Hi Antony your gears sure look good but the specs about printing are tightly bound to your PLA producer, your print device and whether you are really sure about the absolute temperatures your printer is showing you. I can measure the bed temperature with my laser device but even with this my printer manufacturer neglects that the printer need a…En afficher davantage
Hi ! I try lot of settings and pla before concerning my vertex k8400 more temp = unstable layer + filament stuck. I learn the PLA quality and old age change a lot too . I m not sure about real temp just my finger say it very very hot aie 🙂 . I m actualy testing more low bed temp too ( 45° ) It seem wraping desapear completly . I upload soon…En afficher davantage
So, just finished the Finger Support plate for the servo and the Arduino board. I hope to have some spare time tomorrow to buy some glue for the finger parts.
For the servo I will draw a smaller pulley so the servo can give more torque with less power. (original it use 90 degrees to move the finger up and down, I like to give it a try to use…En afficher davantage
Hey nice Marten!! I like that Carbon PLA. I remember the parts you showed me in Eindhoven, the quality was very good! Pulley rotates 90 degrees because the HK15298B digital servo recommended for the hand rotates only 90 degrees. That being said, you can use any servo you like with Finger Starter and of course model your own pulleys. 🙂
Hey Gael,
The CarbonFil is more PET based ! And yes, it’s nice material to use but it needs some attentions for the first layer. (OK I’m still playing with some settings like Nozzle Temp and PrintSpeed)
About the servo: The thing what I hope to test, is that we can use smaller servo’s so we getting less weights in the Arms ! Each gram what we…En afficher davantage
Sebastien uploaded a new picture: inmoov-doigt-3dprin… il y a 10 ans et 4 mois
Finger Starter, the very first things i 3D print. A really good starting point on the InNoov project and robotics. If you can do a Finger you can print a Robot :-). Nails are paint by my daughter Servo base is in PLA and the finger in ABS
Finger Starter
Haha, It’s good that you say that the nails where painted by your daughter 🙂
For a first print it looks very well printed. Have fun with it.
(I see you have placed a link in your message, is the link bug fixt ?)
Hello Marten, haha i’m going to open the first french manucure for robots :-), most seriously i think to use this to easily detect the finger position using color detection in the pictures I have a flash forge creator : it produce very good print at the begining, but after 50 hours, the 3mm aluminum plate start curving, even with a glass plate…En afficher davantage
Just finished the last finger pieces for the Finger Starter Kit. All are printed with CarbonFil with a 0.2mm layer hight. (I now, it’s better to use 0.1mm 🙂 )
Hey looks great. Many, many more parts to print however … I give a filing to the finger parts where they move against each other because the printing in layers creates imperfect vertical surfaces. I do not want your pieces get broken but does it feel like the you might brake the parts when assembling them? I broke several with PLA and ABS when…En afficher davantage
I don’t now yet with the fingers. The CarbonFil is great stuff and feels strong. I’ve used this to make some prototype parts for my Camera Gimbal. And it didn’t break 🙂 For now I’m still waiting for advice about which glue I can use for this CarbonFil.
I will come back to this question if I now more 😉
Hi thanks for your comment. What is your print bed made of and what temp / preparations do you need to make the pieces stick to it?
I got the same trouble. Happily with abs it can be repaired quickly with acetone. Some times after I found this tip, just heat to smooth the holes. It looks like Mats Önnerby tips with airgun to mount pla parts but with a solder iron. Have a look on this video : Hope it can help.
Hi Juerg and Sebastien,
I’m still using the standard clean glass plate from the UM2. After each print, I’m cleaning the plate directly when it’s still hot.
For CarbonFil I’m using a temp from 255 C and the heated bed is set to 60 C. I’m still playing with some settings. Most important thing is that the plate needs to be levelled well and very…En afficher davantage
I think I will sit down and create a video about my finger assembling techniques including the strings. Watch out for it.
Great prints Marten! In the video posted by Sebastien, the idea is great! Specially if you drilled the holes a bit too wide. But be sure that finger stays loose, in the video they are stiff, rigid, and that is not okay for the movement. The finger should move freely at each joint.
Haha, yes the video is good for all the joint parts.
I was more focused how to glue all fingerparts together like part-1 with part-2 etc…. CarbonFil is PET based and PET is difficult to glue normally. I hope the 30% of carbon-mix will make it easier to glue this together.
Hello InMoovers,
Last week I received my six servo’s for one InMoov Hand 🙂 I hope soon to start printing this.
Before I start with this, I like to upgrade my UltiMaker-2 with a new 3DSolex Olsson Block and a BuildTak 3D Print Surface. I also ordered some extra Nozzles for this Olson Block. – One RVS 0.4mm for printing with CarbonFil. – O…En afficher davantage
Woouiii you are going to make wonders with that printer! You should have told me when we were in Eindhoven that you wanted to build the hand to make some tests with the hall sensor, I could have brought you one that I keep for my robot in case it breaks. Yeah, print first the finger starter it will be easier. Let me know for the finger tip design…En afficher davantage
Thanks for your offer about the spare hand 😉 It’s no problem to print it myself, it’s a good test for my new UM2 configuration.
I think there is a easy way to place a magnet in the top from the Vingers. This peace is printed in two parts, so I can drill a hole from 2mm in on of the parts. For the Hall sensor I’m not sure about the…En afficher davantage
Sebastien a publié une note il y a 10 ans et 4 mois
Stomach in progress this week, ouch the most difficult is to paint the finger in black 🙂
Cool after working on the website , a bit of fun 3D printing! was there the script in my database for the NeoPixel ring, I can’t remember if I have uploaded it on the site? If not let me know and I will.
Hi Gaël, yes my 3d printer feel a bit alone these last weeks :-). I restart printing for finish InMoov asap I use the arduino script you post here
NeoPixel ring : arduino code for stomach
, it works perfecly. thanks (Just need to install the adafruit library) I don’t check if MyRobotLab already have added the NeoPixelRing service ?
Good! Well, no the NeoPixel Ring is not yet implemented in MRL. It actually means, it needs to run on a seperate Arduino dedicated only for that function.
hello what is the model for the stomach NeoPixel Ring it’s 12, 16 or 24 led?
Martin, It’s the 16 led ring ref. Adafruit Flora Neopixel Ring 1463 http://www.adafruit.com/product/1463
@ambroise super, Really looking forward to see the video
Sebastien a publié une note il y a 10 ans et 6 mois
Hello, Is somebody try voices for inmoov comming from Voxygen French cie ?
Yes, on https://voxygen.fr/ like the bicool voice 😉
Sebastien uploaded a new picture: inmoov-introspectio… il y a 10 ans et 6 mois
Gael Langevin a publié une note il y a 10 ans et 8 mois
Some time ago I was in Poitiers, invited for the Gamers Assembly by Quai-Lab. I met some young fellows that wanted to build legs for InMoov following good dimensions and my 3d view concept. Here is what they have achieved so far, they started to print them as…En afficher davantage
Really cool!
I hope and i pray that our Inmoov will get legs!!!
InMoov with realistics eyes by Peter Anderson
Sebastien a publié une note il y a 10 ans et 8 mois
>Airwin first video…
Airwin InMoov robot first video
Great! I always enjoy videos, specially when they are comic! By the way great progress Quai-Lab
Bob Houston made a modification to my neck mecanism, which is pretty cool.
Gael Langevin a publié une note il y a 10 ans et 10 mois
Но главным детищем Яна стал «InMoov». Это робот, напечатанный на 3D принтере с программным кодом управления, взятым из «open source». InMoov build by Ian, a Russian student.
Here is Bob’s base for his InMoov. Nice and clean job, we can’t wait to see it moving around a little further.
Here is another use of InMoov in Russia, University Kharkov Ukraine. http://goodnewsagency.blogspot.fr/2015/03/robot.html
I created a tutorial for the Nervo board available on the shop, using some of Martens pictures, to help you during your assembly.
Nervo Board tutorial
I sure hope this helps.
Gael Langevin a publié une note il y a 10 ans et 12 mois
For the fun, what if we print a big hexapod for InMoov
Inmoov looks like something from Outer Limits.
Many will need to print, but the robot will go 🙂
Sooner or later, someone will make…
yeah that is likely possible!
Gael, what about anthropomorphic legs? What if to attach the tail with the wheels to the back the of the robot. The tail will confer resistance. The wheels can spin in one direction only.
https://groups.google.com/group/inmoov/attach/55960cb8ff013a59/IMG-20150118-WA0002.jpg?part=0.2&authuser=0&view=1
Ah yes I had seen your post, but I couldn’t find in which topic it was posted. It is a good idea of course, as a temporary feature. I was thinking of using an assisting walker for the beginning. And then when we figure a better way for the robot to walk, we could remove it. And let him fall.…En afficher davantage
Gael Langevin a publié une note il y a 11 ans
InMoov Bartender. Very cool video! Richard has done a very good job with his InMoov Andrew.
Gael Langevin a publié une note il y a 11 ans et 2 mois
Never heard of that one…
Robot Story Time
Gael Langevin a publié une note il y a 11 ans et 7 mois
Timelapse at Canterbury University New Zealand
Gael Langevin a publié une note il y a 11 ans et 8 mois
InMoov Jarvis
Posted for Jhack, whom also seem to encounter problems with posting on the site:
En afficher davantage
BoB tried to post his latest video, but apparently he has problem doing it, He asked me to try for him, let see if it works:
I found this InMoov with a mobile platform on YouTube:
Gael Langevin a publié une note il y a 11 ans et 11 mois
To Fred and others: https://groups.google.com/group/inmoov/attach/151d3d256a4108f0/spring%20tensioner1.jpg?part=4&authuser=0 This is how I see a spring added to the retraction tendon. In this set up we avoid forcing on the servo either way of rotation and it also avoid losing tension in the tendons.
Have you already tried this ? If so, what kind of spring do you use, and where to buy it ? 🙂 (ok, I’m lazy 😉 )
No I haven’t tried yet, I want to order a box of various springs on ebay.
I really think this member activity stuff doesn\’t work well. But I can\’t seem to find a better way to make. I hate the videos that are cut in half. Seems also that it is difficult for you guys to post comments, because there is almost never comments on the posted pics and vids. Any suggestion about that?
I’m not really into site programming but when you go to activity the bar on the right is not needed any more. if this is removed you might have more room for the videos.
for the comments, Im looking almost every day to see what others are making. the comments are sometimes low but I think lots of people are watching.
I also found it a bit difficult to navigate the site. I just kept punching around until it functions as it should. I would also agree with dumping the update stream on the right side but leave the members activity button.
I have found that by using « copy and paste » into the text box is the easiest way to post You Tube videos. It is unfortunate that they are cut in half but by clicking on the name of who posted it, it takes you to the video. I too think that a lot of people look at the site but everyone leaves comments. I know I don’t comment on everything but I…En afficher davantage
Hi Bob, so if you want to post a video from your youtube account, you just copy paste it into the comment box?
Hi Gael, Yes. When you click share on your You Tube Video, it gives you that .http://youtu.be/…#. Copy that and paste it in the comments box. When you post your comments the video is attached.
Gael Langevin a publié une note il y a 12 ans et 1 mois
very cool! Man the students are going to go wild! If you get a minute (not sure you will) please make a picture, I would love to see that.
Gael Langevin a publié une note il y a 12 ans et 2 mois
Welcome Markus, since how long did you start your InMoov?
Hello! And thanks for welcoming me. I started my inmoov approximate 2 month ago
You received the Kinect, cool!
yeee