Sign in to our website and become an InMoov member. It will allow you to post message, pictures, and share with others InMoov builders. It's just one click away!
Identifiant ou adresse e-mail
Mot de passe
Se souvenir de moi
Mindless a publié une note il y a 9 ans et 1 mois
Just Uploaded a Modded version of the Finger Starter Kit Main Base- http://www.thingiverse.com/thing:1947095 Its a pretty Simple Mod but very handy for R&D on Tendon Experimenting,,,,
Perry a publié une note il y a 9 ans et 1 mois
Westworld maze insert for my inmoov.
Mindless a publié une note il y a 9 ans et 2 mois
Just Uploaded the Modded Elbow Joint to Thingiverse- (two types) Servo Tray and Tension bed will be online in a couple of hours- just panel beating work on the servo tray and tension bed- prints clean and joins together in one piece not two– extra screw/bolt holes- and there is a 2piece version too..
Hello Mr Gael, Guys and Girls- I see the guys over at -Myrobotlab- have got the Electric Motor with H-Bridge and PID working to the point where it’s a real alternative method of powering the mechanical movements of Inmoov,,, So I assume this mean a cheap and nasty servo that is prone to “Burning-Out” can be modified so it keeps its Gear train…En afficher davantage
2pc Forearm- 100% Infill- PLA
Perry a publié une note il y a 9 ans et 2 mois
There was a surprise party when I got home from work!
Hi Perry,
he looks sad, he needs a girlfriend. 🙂
Mindless a publié une note il y a 9 ans et 3 mois
This is a pic of the -Push on /Push off – Finger Tips that I could load with the last post,
Hi Guys, I’ve got my- EyeglassV2- “and” EyeSupportV4- Just about ready to be released- it will do away with having to glue the holder in place because it is now printed with the -EyeglassV2- All key mechanical movement remains in tacked- the EyeSupportV4 has had a lot of little changes made to it that you won’t even notice (servo mounts /wall t…En afficher davantage
Hello Mr Gael,, The rebuilding and cutting up of Inmove in SketchUp for bigbed printing is coming along nicely,, as I was doing it a though it might be worth taking some pictures of the parts assembled but not cut up for reference for other builders,, as you can see in the posted picture it will give builder a better understanding of how it all…En afficher davantage
How is it working in SketchUp with the native STL files?
Surprisingly well,,, given SketchUp many many flaws and limited tooling, but I can work 10 times faster in it doing non-complex objects,, just finished doing an expansion pack” ericthepoolboy” “Toyota 22RE Engine” The engine block and valve head really start to slow down SketchUp-and lost some section during the conversion, but SketchUp is up t…En afficher davantage
Thanks for the image. I’m adding it into the tutorial 3Dsketch views. It will certainly help other builders. Sketchup works pretty well with STL as long as the files do not have too many vertices. Many CAD softwares like to abuse with curves on all the edges and corners, which creates super heavy STL. Sketchup may then start to be very laggy. My…En afficher davantage
Hello Mindless, Thanks for posting the picture. I have added it to the chest and torso 3D sketch view. I see you do not have my ThroatLowerV1.stl, but a variation, which might confuse some builders though.
Good eye,,, I forget about that, here’s the correct piece in place,, anything you see that out of place just let me know,,
Perry a publié une note il y a 9 ans et 3 mois
Here is my version of the forearm. Basically trying the same as Marten. I wanted a straight run for the tendons so I would not need the tensioning spring system. Kept Gael’s servo holder and guide system. Also the wrist drive is in line and not offset which I think makes it a little more robust. Used a slimmed down version of Marten’s…En afficher davantage
Looks awesome Perry ! It’s a nice option to use the default servo’s 🙂
And are you happy with the mechanical results ? For you it’s better to see and feel the results instead of the default setup 🙂
Thanks Marten. I like it a lot. There is still a bit of tuning to do but the geometries are good and the wrist rotation is solid. I may still put an inline tension spring in place but not sure. Time will tell if it is needed.
Great Perry, I see that there is many inventors around!
Thanks Gael!
Hi guy and girls ,, here is a 4 Part Skull and 4 Part Internal Supporting Structure,,,Surprisingly a lot of work to put Inmoov back together,, Largest exterior surface alignment error was 0.3mm during mating process of the smaller sections, the leading edges were removed then hand stitched back together,,the forehead needed a little bit of work to…En afficher davantage
Great work. I used your previous version on my head. Really liked the streamlined look. Will you post thes files up?
Yep,, will post the files when i am happy with the finished results (just about there),,, had to do some touch up work last night on the “eye_glass” so the Mounting system for eyes moves a bit more freely…. Will post a pic in my album when finished,,
Great Mindless! Just for info, there is some parts already available in the InMoov derivative collection, but I’m sure you must have seen them already.
Seeing Marten’s great work I am rebuilding my forearms as well. Similar concept except I am trying to preserve as much of Gael’s design as possible. Works with his servo holder and standard servos. I had to hollow out RotaWrist1V4 so now there is a straight path for the tendons. The wrist drive is not offset so a straight shaft drives the wrist.…En afficher davantage
It’s nice to see your idea about this. I think I will see your complete setup tomorrow, I hope it works well and I can’t wait to see a video !
Keep up the good work 😉
We don’t all work as fast as you 🙂
Cool design Perry, this is nice to give room for the tendons to run straight out from the wrist to the Servobed.
Thanks Gael, I a trying to adopt some of your design practices to make parts robust and cleanly exported. I have stopped putting a radius on everything (just because they are easy and look cool). I am starting to see the beauty of a simple to work with STL that can be modified by others. A little more function over form. The simple little parts…En afficher davantage
Perry a publié une note il y a 9 ans et 4 mois
Sorry for multiple posts here.
Nice job! Are you going to share the design? I would sure use it as I don’t have an on board computer either. Thanks
Hi Bob. Here you go. Still a bit of a WIP but curious to see how it fits for others.
http://www.thingiverse.com/thing:1798673
Thanks a lot.
Agreed, nice work….
Indeed, very cool design! Thanks for sharing 🙂
Great work and very nice adaptation. Which software do you use for to do that? It doesn’t look like Blender. It’s interesting to know because other builders might be interested to see how you re-worked your parts with only the STL at start.
Hello Gael, Working with STL files can be a real hassle as they are among the hardest to modify after the fact. As you can see in the pics below they import with thousands of facets so there are not really planar surfaces to work with. I use Solidworks to import your individual stl files. It is important to import as a solid body instead of a…En afficher davantage
Thanks for the explaination Perry. When exporting from Blender to STL format I use a plugin within Blender to check if parts are clean without inverted facets. This plugin did not exist when I started InMoov project, therefore some of my first parts could not come out clean 🙂 One of the reasons I do not create parts with too many round edges,…En afficher davantage
Hi, I’ve just started the project, so sorry if my question has been answered previously.
I though that the upper back was for mounting the tablet. does this mean the the robot can operate without the tablet?
Hi Kevon. You are correct that the position in the back is for the tablet. Some people use other tables or raspberry PI’s or other controllers to run the bot.
Making a back cover to fill up the Lenovo hole since I don’t us a tablet. It follows the lines of Gaels back design and matches the contours.
Le profil de Mindless a été mis à jour il y a 9 ans et 4 mois
Perry a publié une note il y a 9 ans et 7 mois
Made some fake servos until I can afford more.
http://www.thingiverse.com/thing:1656088
Finished the chest, things back together. Head coming together then off to the wiring rats nest in the back.
One piece chest tutorial posted to forum.
Le profil de Perry a été mis à jour il y a 9 ans et 7 mois
Making some progress
Gael Langevin a publié une note il y a 9 ans et 10 mois
Printing another InMoov, because the original is going to stay home. It is a precious robot now! Having a second printer makes it fast, specially because I updated the firmware to Sailfish on the CTC printer. I used to print on Kapton with the ABS but finally got to print directly on glass which is giving a super result and surprisingly absolutely…En afficher davantage
PS: removal of the slurry ABS on the glass after print is done, simply run under cold water tab and it will detach itself like magic. Dry the glass plate and you are ready to go again.
Hi Gael – great info thank you.what is the consistency of the ABS slurry you use. your prints are look great.
The slurry is almost totaly liquid. It’s hard to say how much percent of ABS and acetone. Maybe 20 to 30 percent of ABS for 100 acetone.
Hi Gael I still think you should give HT-PLA a try and use a print plate that will not need any slurry or tape and allows to remove items by just picking them up from the cooled out print bed!
i am making inmoov right hand so can i get the Tensioner.stl file for it please i am not getting it anywhere can you please provide me the link of it
The tensioner is with the servobed in the galery…
InMoov body parts library :
Gael Langevin a publié une note il y a 9 ans et 11 mois
My printer is out of work for a moment… Gee what a smell, if you ever get your heated bed that burns out, you need to ventilate your workspace!! It took me a while to find a heated bed this size in Europe . 300x200mm. I finally ordered the PCB in Danemark.
wouaaa it is hotttt lol amazing
Oh yeah and it smells really bad in my workshop…
i can t think it is possible and so so dangerous
Uhh, Uhh, my printer manufacturer had changed his print bed product line to make it almost impossible to overheat it (you could fiddle with the control SW however). I assume some workshops could run into serious problems having the printbed burning through. Think about switching to PLA-HT (or HT-PLA) which is as good as ABS but prints on a 50…En afficher davantage
@Geal I guess it’s beause your heating bed’s temperature sensor have loose from your heating bed!! I suggest you check complete all your 3D printer’s switch, sensors to prevent this happen again…
Because it is also been a very long time that I wanted to inverse the InMoov logo on the hand, this has been the occasion to clean up those parts. Check now for the version V6 of the…En afficher davantage
Hey I just fused under Blender my recent modified TopMouth and LowBack. Rotated at 45° on the Z axe and they actually still fit in the correct 12cm3 build area !!
So now TopMouth and LowBack are permanently fused on the InMoov website. and can be screwed instead of being glued. Make sure to get the V3 version on InMoov.fr. I didn’t update my…En afficher davantage
This is awesome! The 2 topmouth pieces have always been kind of a pain to work with, so that will help alot.
Yes indeed, I also did a reprint with fused topmouth after coming back from India, the head had been damaged in the suitcase during flight travel. It is much easier to assemble now.
Well it took me a while but it is done!
New builders will have a lot more fun to assemble the skull now. I have set screw and bolts holders in various parts to make the last fit much easier. You can use 3mm screws and bolts to attach the parts together. I modified: -TopMouth -SideHear -LowBack
Ahhh, great, I had started to add flabs n stuff to keep them from falling apart.
Gael Langevin a publié une note il y a 10 ans et 1 mois
Small video to explanation the driving system of my plateform and the locking mecanism for to be able to push InMoov by hand while driving direction with the remote. I\’m in the process to make a very small remote transmitter which could be held within the palm.
Thanks Gael, now I see how it all works. I like how you can detach the drive wheel to push it around manually. See my comments on Sebastiens’s post.
@Bob, to answer your previous questions on Sebastien’s post: The base can carry InMoov easily. You can add at least 10kg and the base can still ride fine as long as the floor is flat. When I use InMoov in the street, the wheels can overcome some holes if it rides full speed. If you look at my video, you can see a battery carrier between the two…En afficher davantage
Using MyRobotLab and creating a special control GUI with sliders. This might be using MaVo\’s GestureCreator in the background.
Students at IES Vegas assembling the eye mecanism on InMoov\’s face.
It is nice to see young people working on things like this.
Gael Langevin a publié une note il y a 10 ans et 2 mois
Waaaoooo release of the MidStomach parts!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
It’s been asked so many times, that even though you will have to re-print all these parts when the legs will be released, that I decided to upload those parts anyway. I also made a pretty good tutorial with it, so CHEER UP, and get your printers warmed u…En afficher davantage
Thank you very much, was waiting for him, it was what I needed.
thank you gael
Thanks very much Gael!
Hi everyone! I uploaded all parts for the new eye mecanism inspired by Mats Onnerby and Bob Houston. The mecanism is more sturdy and gives wider degrees of rotation for the eyes. I created files that are simple to print with no support besides for EyeSupport and they require no modifications of EyeGlass (Face). Also I managed to use the same…En afficher davantage
Awesome Gael and thanks for the files and the tutorial.
Thank you Gaël , i cant wait to start the head !
Gael Langevin a publié une note il y a 10 ans et 3 mois
Last night InMoov had something of a Picasso painting… Modifying the eye mecanism to adapt a mix of Mat and Bob to be able to use my previous face design along with the Hercules camera and the DS929HV servos.
OOOhhhh Yes,
This is very good news Gael 🙂 I will soon start printing the head, so your update is just on time 😉
This week I will receive my new _XT filament from ColorFabb. I hope it’s a good filament to use for most InMoov parts, even for the shoulder mechanical parts.
Other question about the camera, are you still happy with your…En afficher davantage
Well the hercules HD does a good job as far as what I do with it. But as I said it would be ideal to have a board for post processing things like tracking, face tracking, object color detections to let the computer do other tasks. The Pixy camera would be great but it is mounted on such a big board…
I will wait for this camera: https://openmv.io/ Leon has ordered them via kickstarter 🙂 This has the same results and is smaller ! I hope the price is the same like the Pixy cam.
The Pixy already used a 4-layer PCB, so it would be a hard work to make this smaller 🙂 Option is to ask for a sort camera-shield mount option.
I use the raspberry PI camera in one of the eyes of the modified head. It’s much better quality than a USB 2.0 camera. And the intention is to use the Rpi to do image processing. You can even find a really small version of the camera. https://www.pi-supply.com/product/adafruit-spy-camera-raspberry-pi/
@Marten, As you mention in private message the OpenMV could be a nice option because it is python based and Open source which could be easily added to MyRobotlab with no need to use an extra Rpi. @Mats, I personnaly would rather a smaller device than having to use a Rpi for the image processing, because with the tests I did using the Rpi the fps…En afficher davantage
I just modified the CableHolderWristV4 to V5.
It is now screwed with the servo instead of being glued to the servo.
InMoov
I’m wondering how Gareth, or anyone else, would proceed to use the below Blender file along with virtual InMoov to create simili human gestures.
The c3d addon for Blender is in the preferences to be added.
http://inmoov.fr/wp-content/uploads/2015/10/walking_slow03.c3d
If we could these kind of files along with the riggs of virtual InMoov, it…En afficher davantage
Gael Langevin a publié une note il y a 10 ans et 4 mois
Feeling like showing your InMoov is powered by MyRobotLab ? These little covers go on each shoulder.
Cool and sure, MRL deserved it to get placed at the shoulders from InMoov.
Last day of Makerfaire Berlin for Tonerwerk with his very nice InMoov. Check the pictures he posted on the forum: https://groups.google.com/forum/#!topic/inmoov/vyEVQvZ0cjU%5B1-25%5D
Bob Houston is having problems posting on the community activity, therefor he requested I would do it for him. If you also encounter problems which don’t allow you to post pictures or videos, let us know on the forum, we will try to figure the problem. Bob has remixed a new eye mechanism which is pretty cool! It is…En afficher davantage
@ Bob Houston,
This looks awesome dude, great work and a cool upgrade to the InMoov !
I can’t wait to see some more video’s with the Eye tracking options 🙂
just WAHOOOO
Good idea, Gael, about an adjustment to prevent cross eyes. I have designed a new part that will allow for that adjustment. I have added it to the STL’s on Thingiverse.
Ah perfect! Hey but you can add comments? So it works now for you the community?
Hmmm, that’s strange that it shows up here but I can’t see my comment on the main Community page
bonjour tout le monde! est ce que bob Houston pourrait faire partager a la communauté inmoov les plans et les fichiers stl de son châssis et la colonne sur roue qu’on voit sur la vidéo youtube? merci d’avance
Hello guys, Here are some more pictures of the new back for InMoov. It integrates a ThinkPad Tablet 8″ which can be replaced with other tablets fitting the same width size specs. A clip on, printed mechanism, makes it easy to insert or remove. Access to the two Arduino Mega and the Nervo Boards is easy once the tablet is removed. Access to the…En afficher davantage
Sorry for posting so fast Just got excited when I saw the pictures from your trip you posted, when do you think you will release them?
I got totally excited myself when finally I could mount them on my InMoov. Yes I will release them. A few little things to modify, specially where the clavi potentiometer rotates, and also the battery holder needs to go a little lower to let access to the power cable of the Tablet.
That is a really nice back. Looks good and will protect all the electronics and hide some of the servos.
Thanks Mats
@ambroise super, Really looking forward to see the video
Gael Langevin a publié une note il y a 10 ans et 7 mois
Some time ago I was in Poitiers, invited for the Gamers Assembly by Quai-Lab. I met some young fellows that wanted to build legs for InMoov following good dimensions and my 3d view concept. Here is what they have achieved so far, they started to print them as…En afficher davantage
Really cool!
I hope and i pray that our Inmoov will get legs!!!
InMoov with realistics eyes by Peter Anderson
Gael Langevin a publié une note il y a 10 ans et 8 mois
Bob Houston made a modification to my neck mecanism, which is pretty cool.
Gael Langevin a publié une note il y a 10 ans et 10 mois
Но главным детищем Яна стал «InMoov». Это робот, напечатанный на 3D принтере с программным кодом управления, взятым из «open source». InMoov build by Ian, a Russian student.
Here is Bob’s base for his InMoov. Nice and clean job, we can’t wait to see it moving around a little further.
Here is another use of InMoov in Russia, University Kharkov Ukraine. http://goodnewsagency.blogspot.fr/2015/03/robot.html
I created a tutorial for the Nervo board available on the shop, using some of Martens pictures, to help you during your assembly.
Nervo Board tutorial
I sure hope this helps.
Gael Langevin a publié une note il y a 10 ans et 12 mois
For the fun, what if we print a big hexapod for InMoov
Inmoov looks like something from Outer Limits.
Many will need to print, but the robot will go 🙂
Sooner or later, someone will make…
yeah that is likely possible!
Gael, what about anthropomorphic legs? What if to attach the tail with the wheels to the back the of the robot. The tail will confer resistance. The wheels can spin in one direction only.
https://groups.google.com/group/inmoov/attach/55960cb8ff013a59/IMG-20150118-WA0002.jpg?part=0.2&authuser=0&view=1
Ah yes I had seen your post, but I couldn’t find in which topic it was posted. It is a good idea of course, as a temporary feature. I was thinking of using an assisting walker for the beginning. And then when we figure a better way for the robot to walk, we could remove it. And let him fall.…En afficher davantage
Gael Langevin a publié une note il y a 11 ans
InMoov Bartender. Very cool video! Richard has done a very good job with his InMoov Andrew.
Gael Langevin a publié une note il y a 11 ans et 2 mois
Never heard of that one…
Robot Story Time
Gael Langevin a publié une note il y a 11 ans et 7 mois
Timelapse at Canterbury University New Zealand
Gael Langevin a publié une note il y a 11 ans et 8 mois
InMoov Jarvis
Posted for Jhack, whom also seem to encounter problems with posting on the site:
En afficher davantage
BoB tried to post his latest video, but apparently he has problem doing it, He asked me to try for him, let see if it works:
I found this InMoov with a mobile platform on YouTube:
Gael Langevin a publié une note il y a 11 ans et 11 mois
To Fred and others: https://groups.google.com/group/inmoov/attach/151d3d256a4108f0/spring%20tensioner1.jpg?part=4&authuser=0 This is how I see a spring added to the retraction tendon. In this set up we avoid forcing on the servo either way of rotation and it also avoid losing tension in the tendons.
Have you already tried this ? If so, what kind of spring do you use, and where to buy it ? 🙂 (ok, I’m lazy 😉 )
No I haven’t tried yet, I want to order a box of various springs on ebay.
I really think this member activity stuff doesn\’t work well. But I can\’t seem to find a better way to make. I hate the videos that are cut in half. Seems also that it is difficult for you guys to post comments, because there is almost never comments on the posted pics and vids. Any suggestion about that?
I’m not really into site programming but when you go to activity the bar on the right is not needed any more. if this is removed you might have more room for the videos.
for the comments, Im looking almost every day to see what others are making. the comments are sometimes low but I think lots of people are watching.
I also found it a bit difficult to navigate the site. I just kept punching around until it functions as it should. I would also agree with dumping the update stream on the right side but leave the members activity button.
I have found that by using « copy and paste » into the text box is the easiest way to post You Tube videos. It is unfortunate that they are cut in half but by clicking on the name of who posted it, it takes you to the video. I too think that a lot of people look at the site but everyone leaves comments. I know I don’t comment on everything but I…En afficher davantage
Hi Bob, so if you want to post a video from your youtube account, you just copy paste it into the comment box?
Hi Gael, Yes. When you click share on your You Tube Video, it gives you that .http://youtu.be/…#. Copy that and paste it in the comments box. When you post your comments the video is attached.
Gael Langevin a publié une note il y a 12 ans et 1 mois
very cool! Man the students are going to go wild! If you get a minute (not sure you will) please make a picture, I would love to see that.
Gael Langevin a publié une note il y a 12 ans et 2 mois
Welcome Markus, since how long did you start your InMoov?
Hello! And thanks for welcoming me. I started my inmoov approximate 2 month ago
You received the Kinect, cool!
yeee