Sign in to our website and become an InMoov member. It will allow you to post message, pictures, and share with others InMoov builders. It's just one click away!
Identifiant ou adresse e-mail
Mot de passe
Se souvenir de moi
Markus a publié une note il y a 6 ans et 8 mois
I love a good workshop tour! Thanks for sharing 🙂
I’m very envious of all that space!
Wow great space and workshop!! You are going to raise an army of robots and drones in there. 🙂 Thanks for your vlog.
smattachai.p a publié une note il y a 6 ans et 8 mois
Hi, I got many time burn with servo board Hobby king HS805BB. Does anyone have any suggestion of other better performance servo?
Thanks.
Som
The omoplate servos are the one that get the most stress. For exemple the gesture « Da Vinci » will get them warm if you perform that gesture too many times. Make sure to check if the autodisable function is activated, this saves servos for good. If not activated you will burn any kind of servo you…En afficher davantage
EDGARD MARK KOMODA a publié une note il y a 6 ans et 9 mois
colocando as capas do peito
Hello, Hello, You should post your pictures in your album and add a link here, otherwise it overloads the community page. Thanks for sharing your progress!
Boa tarde, atualizando as fotos, começando as carenagens do peito.
Marcos Barraza a publié une note il y a 6 ans et 9 mois
Aristóteles no quiere ser filósofo quiere ser estrella de rock
Super! It’s nice to see Aristoles is getting movements and that he can dance also! Now time to teach him to grab an object by himself.
Bonjour Gael, je te remercie beaucoup pour tes paroles car venant d’un grand artiste, c’est un stimulant fort pour continuer à travailler Buen día Gael, te agradezco mucho tus palabras porque viniendo de un gran artista, es un fuerte estímulo para seguir trabajando
WOW 대박!!!!!!!
Aristoteles, inmoov robot, agradece las felicitaciones
Modificações da impressora para trabalhar com ABS
too many pictures. are you aware of this head? https://www.thingiverse.com/thing:1636086 juerg
Fotos 4 só uma impressora é bem demorado.
Fotos 4 continuando
Fotos 3 mandando bala e imprimindo 24 horas por dia,kk
Fotos da evolução do inmoov 2
Dando procedimento a impressão do INMOOV
Teste da cabeça com arduino
Enseñando a Aristóteles a decir adiós, Aristóteles es el desarrollo de Inteligencia Artificial Juárez, México, cuenta con programas propios, reconoce la voz y puede hacer movimientos complejos con un solo comando de voz https://youtu.be/TOxFBW4AwwI
theDVSguy a publié une note il y a 6 ans et 9 mois
Does anyone know if the Shop is open for buisness and shipping items ?
Le profil de https://solar-lighting.net a été mis à jour il y a 6 ans et 9 mois
Le profil de PolTox a été mis à jour il y a 6 ans et 9 mois
Le profil de theDVSguy a été mis à jour il y a 6 ans et 9 mois
Le profil de nveille a été mis à jour il y a 6 ans et 9 mois
Ron a publié une note il y a 6 ans et 9 mois
Has any one taken a count of how many 3d print parts in Inmoov Hips UP, ?
smattachai.p a publié une note il y a 6 ans et 9 mois
InMoov Robot plays with \ »Tubtim\ » the 9 monhts baby:
Oh wow super progress! Your kid is going to be a botmaster 🙂
InMoov Robot in Thailand progress:
Dominique a publié une note il y a 6 ans et 9 mois
My new head https://youtu.be/vDI5DFp1gnU
Oh interesting! Nice video! So you removed the camera from the eyes and placed on the forhead, is that the little block we see on the head? Do you use the eyes for something else than two leds or is it some laser distance calculator?
Hello Gael.
I used this design for remake eyes : https://www.thingiverse.com/thing:3397102
IP cameras can’t goes inside the eyes. So i put camera on the forhead. The picture is no longer truncated by the face. For leds, i used neopixels, so i can change the color according to the robot’s mood. For example, for anger, the eyes turn red and the…En afficher davantage
https://www.facebook.com/1152475588266403/photos/a.1152482851599010/1228061224041172/?type=3&theater A girl came to take a picture with Aristotle, our version of the immoov robot and 3 hours later she sent me this drawing
Hello, Always nice to see how others can interpret the robot! Thanks
Chuah Wei Jie a publié une note il y a 6 ans et 9 mois
Anyone have any idea how the power supply is connected to the Nervo Board? I\’m lost.
Hello, The power supply is connected to the Nervo Board via the yellow XT60 connector. It is wise to add, between the XT60 and the power supply, a main switch for safety shutdown. The switch can be placed in the side back location.
http://inmoov.fr/wp-content/uploads/2016/06/image12-300×225.jpeg
Is the XT60 connector attached to the Nervo Board by soldering at the port of 5/6V?
Yes it is. There is a picture showing it in the tutorial.
Dear Gael, in the tutorial it stated that « Soldering the little back connector option 3.3V or 5V to power last analog pins. » in Step 3. If I’m using the same voltage for all servo, do I need to solder this? (I’m not using the 3rd nervo board for the finger sensor as I didn’t build that part)
I am guessing you will use a PIR sensor which requires 5V. The PIR sensor detects human motions, it’s nice to have on the robot. That means you will solder the 5V to power the last analog pins. To have all servos working on the same voltage, you need to solder the two main jumpers…En afficher davantage
I wonder do I need to solder the third red dot (As stated in Step 2, the one at the bottom-left in the picture) if same voltage applied?
Yes if you want to give 6V to the PIR. But note that it’s a 3 point solder, this gives you the choice, you can give the PIR 6V or 5V. This will give 6V to the PIR: This will give 5V to the PIR:
Le profil de BADRyan a été mis à jour il y a 6 ans et 9 mois
Luke Sky a publié une note il y a 6 ans et 9 mois
Hi everyone. 057 is practically finished. for now travel on wheels then you will see.
Wow, very good progress! Did you motorize the wheel platform?
Hello and thanks. Yes the base is motorized. actually I wanted to make a tracked base but the project is still under study. The base belonged to an old 80s robot I had. It was called OMNIBOT 200 and had a base with very powerful engines. 0.57 weighs 9kg so it needed.😊
Steve Rayner a publié une note il y a 6 ans et 9 mois
I’ve just uploaded my latest progress video to YouTube. Please take a look. I’m hoping to get some comments, so please let me know what you think.
Thanks for sharing the video! Even if you plan to not use the Nervo Board, I would recommend following the correct pin layout to avoid confusion when you will start using the config files of MyRobotLab.
You can run your test directly into MyRobotLab, this would save you time because you wouldn’t need to write a Arduino code each time you…En afficher davantage
Le profil de Giuseppe Scarpenti a été mis à jour il y a 6 ans et 9 mois
Le profil de LOUST a été mis à jour il y a 6 ans et 9 mois
The hardware map indicates we use Arduino pins 22, 24, 27, 28 & 29. However these do not appear to me PWM pins on the Arduino Mega. How does this work?
Hello Steve,
There is a difference between PMW which is used to control a dc motor speed (H-bridge), or a PWM used for servo’s.
The PWM for controlling the speed for a dc motor, or intensity for a LED, is at some pins hardware-based (internal circuit/timer, to sending a PWM with a fixt frequency in the background.) These pins are the pins where…En afficher davantage
Thanks Marten. I’ve been using Arduino for a few years and I didn’t know that.
Quick demo. https://youtu.be/5YS3-TCTO2w
mario a publié une note il y a 6 ans et 9 mois
Gael Thank you for the answer but Ihave many problems with welding.
Hello, Maybe ask a friend who knows to solder… Otherwise there is many youtube tutorials to learn how to solder.
Maurizio Lecce a publié une note il y a 6 ans et 10 mois
Hello Guys i\’m starting today in the ne fantastic Project! if you have suggest for me i\’m ready to listener! Thanks Maurizio
mario a publié une note il y a 6 ans et 10 mois
como comprar nervo boards ya soldados?
Hello, You can buy directly from InMoov shop and follow the included totorial:
Nervo Board + Components
Nervo Board tutorial
Best fun!
smattachai.p a publié une note il y a 6 ans et 10 mois
How to set voice control that InMoov reconfirm command before operate?
Hello, The reconfirm before operate used to work with the first MyRobotLab version. This was prior having a chatbot for the robot. You could modify the AIML files in order to have the same effect than the old version but it will take you a lot of time to rewrite each command. Here is a exemple:
<category> <pattern>SEARCH…
En afficher davantage
Thanks
Marcos Lopes Silva a publié une note il y a 6 ans et 10 mois
I can not input my place on Map…how can I do it? I am from Jundiai – SP – Brazil
I also did it 3 months ago but not success yet. Same as you.
Le profil de Jean-Pierre SUARDI a été mis à jour il y a 6 ans et 10 mois
Hi, Can anyone suggest me how to activated OpenCV in MyRobotLab? Thank you. Som
Hello, 1-Edit the config file « service_D_OpenCv.config » 2-Modify: False to True. 3-Save the modification 4-Double click START_INMOOV Opencv is now running in MyRobotLab. You can check if the camera gets activated by saying: « Camera On »
Hi, I am installing Servo Motor HK 15338 but can not remove the small obstruct rotation piece. Can anyone suggest the way of remove? Thank you. SP
Hello, 1-Remove the Gear from the servo 2-Set the gear in a vice (make sure to keep it clean) 3-Extract by rotating the metal pin with some Russian pincer.
I see. Thank you to Gael.
hi i just hacksawed it off..lol kenz
LWFlouisa a publié une note il y a 6 ans et 10 mois
Just finished bundling a ChatBot and AI framework into a ruby gem. One thing I dislike about it, some of this I\’m not sure how much will actually be useful when I finally get around to purchasing this kit.
Doesn\’t Python have Pip?
Hello, Is this the chatbot you are working on? https://github.com/LWFlouisa/Bianca
Yea absolutely! I’m just extending it.
michel Trojman a publié une note il y a 6 ans et 10 mois
Gerard Espona a publié une note il y a 6 ans et 10 mois
almost finished to print hand and forearm 🙂 Goal for this summer to print and build torso and head too 🙂
Welcome back and have a good summer print. Make sure parts fit together before printing everything. Specially the torso parts.
Thanks Gael ! Until now looks good .. Will share progress soon
some printing with anycubic 🙂
Some of the old initial tests with the finger starter kit
Back seriously to this great project ! Bought Anycubic Mega-S .. for now printing on PLA .. soon some photos 🙂
Welcome back Gerard, have a great summer printing and InMooving
Steve Rayner a publié une note il y a 6 ans et 10 mois
Progress, progress! You are doing well and thanks for your videos, I am sure it helps other builders.
My latest progress will premier on Youtube tomorrow at 19:00 GMT+0100 (BST). Please join us then on this link; https://youtu.be/fosRUe96RIA
Sorry. My Bad, this is scheduled for 20:00.
Le profil de S_Knight a été mis à jour il y a 6 ans et 10 mois
Le profil de David a été mis à jour il y a 6 ans et 10 mois
Teacher INS Sentmenat a publié une note il y a 6 ans et 10 mois
Hi, my name is Juan, from Sentmenat ( Barcelona). I\’m making this robot and in this moment a would like to buy a nervo board. I dont know how I can do it. Could you help me, plis? Thank you.
Just directly ordered from this site.
have a look you look at the menu bar.
You can find the « SHOP » option. I already ordered twice. It was a fast and excellent service!
Le profil de Quentin a été mis à jour il y a 6 ans et 11 mois
LWFlouisa a publié une note il y a 6 ans et 11 mois
I have some light experience in Ruby, Python, and some other languages. Is there any chance I\’ll need to know assembler language for this?
Or would python and javascript be enough?
if you plan to use MRL you can add python def’s. Trying to understand MRL needs java knowledge. For my own invented cart for InMoov I used Arduino C and python.
Thanks, I’ll look into that!
Le profil de michel Trojman a été mis à jour il y a 6 ans et 11 mois
Luke Sky a publié une note il y a 6 ans et 11 mois
0.57 👍
Nice! It seems to be the gesture « Movement number3 » isn’t it?
Hello. True … I copied the movement from yours … because it is very beautiful.
raphael a publié une note il y a 6 ans et 11 mois
Bien le bonjour du jura, Nous somme entrain de monté la partis biceps d’InMoov, Serrais t’il possible d’avoir de l’aide ? nous arrivons pas à placer le potentiomètre correctement Lors d’un essais le servomoteur le servomoteur ne c’est pas arrêter à 180° et le potentiomètre c’est bloqué puis a sous la force du servo détruit la pièces R…En afficher davantage
Salut, Le lien utile… Un conseil… Pour les tests ou les réglages de servos montés sur le robot, vitesse lente recommandée et prévoir un switch d’arrêt d’urgence de l’alimentation. 😉 Perso, je limite l’amplitude en phase de test. Par exemple, si un mouvement est prévu pour 95° d’amplitude, lors d…En afficher davantage
Tu devrais plutôt poser tes questions sur le forum, tu augmenteras les chances de réponses…
forum-francais
https://groups.google.com/forum/#!forum/inmoov
Bonjour merci de m’avoir répondu et de ces précision
Je n’arrive pas à poster sur le forum il m’affiche une erreur je pensais avoir une réponse plus facile ici
J’ai bien regarder la vidéo de Gaël mais rien n’arrive à résoudre mon problème
J’ai l’impression que le potentiomètre ce bloque à 0 dégrée quand je veut allez à 180 (envoyer au servomot…En afficher davantage
Le profil de Ronald3 a été mis à jour il y a 6 ans et 11 mois
Le profil de raphael a été mis à jour il y a 6 ans et 11 mois
Le profil de Erwan KERHASCOËT a été mis à jour il y a 6 ans et 11 mois
Steve Rayner a publié une note il y a 6 ans et 11 mois
Latest update in Civrays InMoov premiers on youtube at 21:30 BST https://www.youtube.com/watch?v=-YTUEGH12yE Please join an leave comments, comments and more comments.
review your pulleys. I was not sure watching your video that you have printed out the 2-level pulleys. The finger designs need different move distances for opening and closing the fingers. You can try to add springs into the strings to account for that but is will be more efficient to use the separate radiis for left and right rotations and keep…En afficher davantage
BIGIARINI Vincent a publié une note il y a 6 ans et 11 mois
Un jour tu marcheras !
This is so cool. But probably needs feet. No seriously, really cool.
Well done Vincent! Did you finally use my original Blender files or have you been using the STL? It seems you used the STL after all.
Hi Gael ! I tried… A lot ! but I failed… It’s too hard for me ! So I came back to STL files. Did you recieved my message ?
Here is the last update :
Yes I received your message. Very nice closer shots. Last time we saw each other, you said the encoders weren’t fully placed but only set for the look, did you have the time to set them on these closer shots? It looks like they are integrated now.
Yes they are integrated but no yet functionnal. ( I have not designed the mecanism to rotate them)
@bretzel59, What do you need help with exactly?